Well completion tools require BÖHLER steels and alloys with high strength and corrosion resistance. Key quality features include ultra-clean materials, full traceability, controlled heat treatment, and rigorous testing for reliable oil and gas performance.
Well completion tools in the oil and gas industry, including packers, valves, and downhole components, operate in highly demanding environments characterized by high pressures, elevated temperatures, and aggressive media such as CO₂, H₂S, brines, and hydrocarbons. These conditions require materials with exceptional mechanical strength, corrosion resistance, and resistance to stress corrosion cracking and hydrogen embrittlement. In addition, components must perform reliably under cyclic loading and maintain sealing integrity and dimensional stability over long service periods in inaccessible downhole conditions.
BÖHLER high-performance steels and alloys are specifically engineered to meet these stringent requirements. Advanced quenched and tempered steels, corrosion-resistant stainless steels (austenitic, duplex, and precipitation-hardened), and high-alloy grades provide an optimized combination of toughness, strength, and resistance to aggressive environments. Produced using advanced melting and refining technologies, BÖHLER materials ensure superior cleanliness, low inclusion content, and homogeneous microstructures, significantly improving fatigue life and operational reliability. Key quality features include strict control of chemical composition, certified traceability, and precisely controlled heat treatment processes. Comprehensive testing, including corrosion evaluation, pressure resistance, and non-destructive inspection, ensures compliance with oil
Komponenty v chemickém průmyslu, např. díly pro odlučovače a tepelné výměníky, díly pro papírenský průmysl, pro těžbu ropy a zemního plynu, pro kompresory, pro odsolování mořské vody.
Číst víceH500 – Žáruvzdorná ocel
Číst víceBÖHLER L276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. BÖHLER L276 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. BÖHLER L276 has excellent resistance to pitting and stress corrosion cracking. Some typical applications of BÖHLER L276 include equipment components in chemical and petrochemical organic chloride processes and processes utilizing halide or acid catalysts. Other industry applications are pulp and paper (digesters and bleach areas), scrubbers and ducting for flue gas desulfurization, pharmaceutical and food processing equipment.
Číst víceBÖHLER L625 is a non-magnetizable corrosion and heat resistant nickel alloy in the form of bars, forgings and semi-finished products up to max 254 mm diameter/ cross-section and oxidation resistant up to 1093°C. Best fatigue strength and resistance to stress corrosion cracking when exposed to chloride containing media. Good weldability.
Číst víceBÖHLER L718AMS is a corrosion and heat resistant nickel alloy – precipitation hardenable – in the form of bars, forging and forging stock. High resistance to creep and stress-rupture up to 1300°F (704°C) and oxidation resistance up to 1800°F (982°C). High duty parts and components for oil & gas and CPI applications, components for automotive, gas turbines, aerospace engines, high-speed airframe parts such as disks, buckets, spacers and high temperature bolts and fasteners.
Číst víceBÖHLERL718 API (UNS N07718) is a high-strength, corrosion-resistant nickel-chromium-iron-molybdenum material with excellent corrosion resistance, especially in H2S and CO2 environments. The alloy is age-hardenable due to the addition of niobium, titanium and aluminium. BÖHLER L718 API is recognised by the oil industry for its simple and cost-effective production in combination with good tensile, fatigue, creep and fracture strength and is used in a wide range of applications in this sector. BÖHLER L718 API has excellent weldability and is resistant to cracking after welding. The material can be used at high temperatures. BÖHLER L718 API is available in the NACE/API 6A CRA versions with a minimum yield strength of 120/140 ksi and also in the high-strength version with 150 ksi. All hardness grades are suitable for sour service and can be used for pressurising and pressure-controlling equipment in corrosive environments. Typical applications include packers, pumps, connectors and fasteners as well as gate valves, throttle spindles, pipework hangers and fire safe valves, but also a wide range of downhole and completion components, nuclear and surface applications.
Číst víceBÖHLER L725 (UNS N07725) is an age-hardenable nickel-chromium-molybdenum-niobium alloy with comparable corrosion resistance to Alloy 625. The strength of Bohler L725 in the age-hardened condition is approximately twice that of annealed Alloy 625 and comparable to Alloy 718. The high nickel and chromium content provides corrosion resistance in reducing and oxidizing environments, while the molybdenum content increases resistance to reducing media and offers high resistance to pitting and crevice corrosion. The combination of elements makes the alloy resistant to hydrogen embrittlement and stress corrosion cracking. BÖHLER L725 is also approved according to NACE MR0175 for use under sour gas conditions. The alloy was originally developed for oilfield applications such as wellheads and well completions, safety valves and other downhole components where it resists the effects of hydrogen sulfide, chlorides and carbon dioxide. The alloy is also attractive for pumps and propeller shafts as well as for high-strength fasteners and hydraulic couplings in marine applications subject to corrosion, pitting and crevice attack in seawater.
Číst víceBÖHLER L925 (UNS N09925) is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminium and is designed for high strength and excellent corrosion resistance. The nickel content provides protection against chloride-ion stress corrosion cracking and, in combination with molybdenum and copper, also offers excellent resistance to reducing chemicals. Molybdenum aids resistance to pitting and crevice corrosion. The chromium content of the alloy ensures resistance in oxidising environments. The alloy exhibits a high degree of corrosion resistance in H2S and CO2 environments and is particularly suitable for sour (H2S-containing) crude oil, natural gas, sulphuric acid, phosphoric acid and seawater. BÖHLER L925 offers high strength and maintains this strength even at high temperatures. BÖHLER L925 meets the requirements of NACE MR0175 and API 6A CRA for acidic applications and can be used for pressure-maintaining and pressure-controlling equipment in corrosive environments. Typical applications include packers, safety valves, pumps, hangers, connectors, fasteners and numerous downhole and surface applications.
Číst víceBÖHLER P501 is a highly corrosion-resistant, nitrogen-strengthened Cr-Ni-Mo-N steel that is characterised by its resistance to corrosion in seawater and very good resistance to intergranular corrosion and stress corrosion cracking. Due to the alloy design, the yield strength is significantly higher than that of a comparable Cr-Ni-Mo stainless steels and a stable austenitic microstructure is achieved, so that the steel remains non-magnetisable even after cold forming and has the lowest magnetic permeability. In addition to its original application as a hull and structure for submarines, BÖHLER P501 is also used for magnetic shielding and components in the oil and gas industry, for example.
Číst víceBÖHLER P511 is a weldable, non-magnetic, austenitic steel with resistance to seawater and intergranular corrosion. This austenitic, stainless Cr-Ni-Mn-Mo-N steel has higher corrosion resistance than Cr-Ni-Mo grades 316, 316L, 317 and 317L and approximately twice the yield strength at room temperature. In addition, BÖHLER P511 has very good mechanical properties at both high and low temperatures. Unlike many austenitic stainless steels, it does not become magnetic when cold-formed or cooled to sub-zero temperatures. Thanks to its excellent notched impact strength at -196 °C (-320 °F), BÖHLER P511 is particularly suitable for low-temperature applications. Typical applications are found in the oil and gas, chemical, fertilizer, paper, textile, food and marine industries for components requiring a combination of excellent corrosion resistance and high strength, e.g. pumps, valves and fittings, fasteners, cables, chains, ship fittings, boat and valve shafts, heat exchanger parts and springs.
Číst víceBÖHLER P513 is a weldable, non-magnetic, austenitic stainless steel with resistance to seawater and intercrystalline corrosion. It offers the best abrasion resistance of all stainless steels. The corrosion resistance of BÖHLER P513 is better than that of conventional austenitic Cr-Ni steels (type 304), and even better than Cr-Ni-Mo steel (type 316) under standard test conditions against chloride pitting, stress corrosion cracking and crevice corrosion. BÖHLER P513 is an alloy with a high silicon and manganese content and added nitrogen, which also works well at high temperatures around 1800 ºF. Silicon and manganese prevent wear and scuffing even in the annealed condition. Higher strengths can be achieved by cold forming, but this does not significantly improve abrasion resistance. BÖHLER P513 is used in the aerospace, food and pharmaceutical, oilfield, petrochemical, surgical and chemical industries, e.g. for valve stems and valve seats, fastening systems, shielding, chain drive systems, pins, bushings and roller bearings, wear rings and pistons in pumps.
Číst víceBÖHLER T200 covers a corrosion and heat resistant steel in the form of bars, wire, forgings and forging stock. It is an austenitic, precipitation hardenable, iron-nickel-chromium-molydenum-titanium steel of ESR quality. Alloying elements of aluminium and titanium allow this material to undergo precipitation hardening (ageing) through the formation of intermetallic phases. The addition of molybdenum increases the mechanical properties and resistance to creep at high temperatures. These products are typically used for parts in the oil and gas industry requiring moderate strength up to 704 °C (1300 °F) and oxidation resistance up to 816 °C (1500 °F), but their use is not limited to such applications.
Číst víceV případě Vašeho zájmu nás kontaktujte.