Zušlechtěné oceli mají vysokou mez kluzu s dobrou houževnatostí a používají se pro konstrukční díly ve strojírenství a při výrobě nástrojů. Nitridační oceli jsou zušlechtitelné oceli s vyšším podílem chromu, molybdenu, vanadu a hliníku a jsou obzvláště vhodné pro povrchovou tepelnou úpravu pomocí nitridačních procesů. Tím se výrazně zvyšuje odolnost proti opotřebení a únavová pevnost.
Kalené a popouštěné oceli jsou nízkolegované oceli, které dosahují vysoké pevnosti v tahu a únavě s dobrou houževnatostí díky kalení a popouštění. Různý obsah uhlíku, chromu, manganu, molybdenu a niklu, někdy i vanadu, ve slitinách je velmi přesně přizpůsoben příslušné aplikaci a má vliv na větší průřezy. Svařitelnost těchto ocelí je omezená. Kalené a popouštěné oceli se používají pro dynamicky namáhané díly ve strojírenství a nástrojárně, např. hřídele a klikové hřídele, šrouby, vruty, nápravy a konstrukční díly. Nitridační oceli jsou kalené a popouštěné oceli s vyšším podílem Cr, Mo, V a někdy i Al. Jsou obzvláště vhodné pro povrchové kalení nitridací, což výrazně zvyšuje odolnost proti opotřebení a únavovou pevnost.
BÖHLER V145 is a Cr-Ni-Mo- steel for applications requiring high tensile and toughness values, in particular in large cross sections in the quenched and tempered condition. The molybdenum addition prevents the steel from being susceptible to temper embrittlement. Highly stressed components with large cross sections for aircraft, such as gear shafts and landing gear components.
Číst víceCr – Mo alloyed steel grade for applications requiring high tensile – and toughness values, particular in medium and large cross sections in quenched and tempered heat treatment condition.
Číst víceBÖHLER V354 is an alloyed Cr-Mo-V quenched and tempered steel for high strength and high temperature requirements, good weldability and suitable for nitriding. Insensitive to tempering embrittlement due to Mo content. Mainly for components in the aerospace industry to be welded and nitrided with high quenched and tempered strength, at operating temperatures from -75° C to 500° C.
Číst víceBÖHLER V361 is a 3% Cr-Mo-V nitriding low-alloy steel of premium aircraft-quality, low-alloy steel offering a tensile strength of up to over 1350MPa in the form of bars, forgings, and forging stock. Due to the optimized production route via VIM-melting and VAR-remelting, the steel offers high impact strength and fatigue limit. It may be nitrided in the heat treated condition to obtain a wear resistant surface. It is used typically for nitrided parts such as bearings, operating under heavy loads and high speeds at moderate temperatures, and requiring highest surface hardness, high core toughness, and less distortion than parts made from case hardening steel, but usage is not limited to such applications.
Číst víceV případě Vašeho zájmu nás kontaktujte.