Skip to main content

Return to overview


The URANOS NX 2200 SMC ist the perfect welding power source for simple, reliable and modern wire fed welding. It is particularly suited to the continuous processes typical of light metal fabrication, shipbuilding, car repairand mechanical workshops in general.



  • Single-phase 1x230V
  • greenWave® inverter technology
  • Built-in wire feeder unit
  • Welding programs (SMART)
  • General
    Welding processs MIG/MAG - MMA - TIG DC Lift
    Materials Carbon steels - Stainless Steels - Aluminum
    Dimensions 620x270x460mm
    Weight 22.4 kg
    Power supply 
    Voltage (50/60 Hz) 1x230V±15%
    Maximum input power 6.4 kVA
    Maximum input current 28.2 A
    Power factor PF 0.99
    Efficiency 86 %
    Slow blow line fuse 25 A
    Open circuit voltage 92Vdc
    IP protection rate  IP23S
    Insulation class H
    Power supply cable 3x2.5mm2 - 2 m
    Adjustment range 3A-220A
    Duty cycle
    MIG/MAG - 40 °C
    35% - 220A
    60% - 190A
    100% - 180A
    Duty cycle
    MIG/MAG - 25 °C
    100% - 220A
    Ø Wire diameter 0.8 -1.0 mm (opz. 0.6-1.6)
    Ø Fluxcoredwire 0.9 -1.6 mm
    Ø Aluminumwire 0.8 -1.6 mm
    Wire speed 0.5 - 22.0 m/min
    N° rolls  4
    Wire spool diameter Ø 200/300mm
    Remote Control compatible yes


      2200 Classic 2200 Smart
    Welding programs - 16
    Push Pull torch compatible yes yes


    • Light job shop fabrication
    • Building sites
    • Shipyards
    • Automobile industry
    • Railway industry
    • Repair and overhaul
    • Workshops
    • Sheet metal working
    • "greenWave" inverter technology for high energy efficiency and
      perfect control over all welding phases
    • Heavy duty and enviromental conditions, high service life
    • CAN fieldbus digital communication protocol system (very high speed
      and high reliability digital communication)
    • Software based controls can be upgraded as new features become
    • High temperature, shockproof, abrasion resistant plastic case
    • Air flow ducting and fully encapsulated PC board to avoid dust
    • Linear controlled fan on demand
    • Energy-saving inverter technology (built-in P.F.C. - power factor
    • Built-in wire feeder unit (4 Roll drives)
    • Wire drive unit fully designed by voestalpine Böhler Welding
    • Ø 200/300 mm wire spool compatible
    • Welding polarity switch device
    • Full digital and user-friendly control panel
    • Welding parameters digital display
    • Last job settings auto-storage at switch-off
    • Back-up/Restore automatic
    • Lock-unlock function key protected by password
    • Complete management of multiple systems on Ethernet
    • Software for supervision and full parameter setting of welding
    • Ideal for stick welding with multiple types of popular electrodes
    • Built-in adjustable arc control features (hot start, arc force,
    • Synergic setting for optimal stick welding with multiple types of
    • Reduced electromagnetic interference with lift start TIG welding
    • 2/4 step operating mode
    • Arc dynamic adjustment
    • Perfect arc ignition (soft start - motor slope)
    • Burn-back and droplet detachment correction
    • Synergic operations from databank (16 pre-set programs) (URANOS
      NX 2200 SMC Smart)
    • Wire speed (0,5-22,0 m/min)
    • Spot welding mode
    • Intermittent welding mode
    • Bilevel MIG/MAG (URANOS NX 2200 SMC Smart)
    • Remote control compatible
    • WU cooling unit compatible
    • Controlled cooling operations