Skip to main content

Return to overview


The URANOS 2000 SMC is the perfect welding power source for simple, reliable and modern wire fed welding. It is paticularly suited to continuous processes typical of light and metal fabrication, shipbuilding, car repair and mechanical workshops.

Uranos 2000 SMC



  • Single-phase 1x230V
  • greenWave® inverter technology
  • Built-in wire feeder unit
  • Color ¡Panel display
  • General 
    Welding processs MIG/MAG - MMA - TIG DC Lift
    Materials Carbon steels - Stainless Steels - Aluminum
    Dimensions 485x210x400mm
    Weight 12.8 kg
    Power supply 
    Voltage (50/60 Hz) 1x230Vac±15% 
    Maximum input power 5x7 kVA
    Maximum input current 24x7 A 
    Power factor PF 1
    Efficiency 85%
    Slow blow line fuse 25A
    Open circuit voltage 58Vdc
    IP protection rate  IP23S
    Insulation class H
    Power supply cable 3x2.5mm2 - 2m 
    Adjustment range 5A-220A
    Duty cycle
    MIG/MAG - 40 °C
    35% - 200A
    60% - 160A
    100% - 130A
    Duty cycle
    MIG/MAG - 25 °C
    100% - 220A
    Ø Wire diameter 0.8 -1.0 mm (opz 0.6-1.0)
    Ø Fluxcoredwire 0.9 -1.2 mm
    Ø Aluminumwire 0.8 -1.0 mm
    Wire speed 0.5 - 16 m/min
    N° rolls 2
    Wire spool diameter Ø 200 mm
    Synergic program 19
    Welding program memory location yes
    • Light job shop fabrication
    • Building sites
    • Repair and overhaul
    • Handicraft working
    • Vehicle bodywork repair
    • Workshops
    • Sheet metal working
    • greenWave® inverter technology for high energy efficiency and perfect control over all welding phases
    • Heavy duty and enviromental conditions, high service life
    • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
    • Reduced dimensions and compact construction
    • High temperature, shockproof, abrasion resistant plastic case
    • Air flow ducting and fully encapsulated PC board to avoid dust contamination
    • Linear controlled fan on demand
    • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
    • Built-in wire feeder unit (2 rolls drive)
    • Ø 200 mm wire spool compatible
    • Welding polarity switch device
    • Full digital and user-friendly control panel
    • Welding parameters digital display
    • Last job settings auto-storage at switch-off
    • User-defined welding program storage capability (8 free memory locations)
    • Lock-unlock function key protected by password
    • Ideal for stick welding with multiple types of popular electrodes
    • Built-in adjustable arc control features (hot start, arc force, antisticking)
    • Synergic setting for optimal stick welding with multiple types of electrodes
    • Reduced electromagnetic interference with lift start TIG welding
    • 2/4 step operating mode
    • Arc dynamic adjustment
    • Perfect arc ignition (soft start - motor slope)
    • Burn-back and droplet detachment correction
    • Crater filler operating mode
    • Synergic operations from databank (19 pre-set programs)
    • Wire speed (0,5-16,0 m/min), amperage and piece thickness adjustment
    • Spot welding mode
    • Intermittent welding mode