Webinars
Search
Toggle Navigation
voestalpine Böhler Welding
Webinars
-
16 Dec 2026
Wear protection at the steel mill
Add to calendarWebinar Language: German
Steel production, from the liquid phase to the finished semi-finished product, is a complex and energy-intensive process. The loads placed on the machining equipment pose an enormous challenge, both mechanically and thermally.
It is not uncommon for special alloys applied via build-up welding to protect the component from premature wear. To find the best metallurgical and process engineering solution, it is essential not only to know the requirements but also to understand the mechanisms underlying the type of wear.
-
13 Jan 2027
How does it work? Process audit according to EN ISO 15614-1 - what’s changing?
Add to calendarWebinar Language: German
A procedure test forms the basis for the qualification of welding procedures. The approach outlined in EN ISO 15614-1 is one of the most widely recognized methods for this purpose.
The latest edition of this standard was published in 2020. The current revision includes proposed changes that will affect the scope of a qualification. This webinar explains the background and implementation of procedure tests in accordance with this standard and provides guidance on changes planned for the future.
-
20 Jan 2027
Effects of Different Wire Feeding Systems on the Welding Process
Add to calendarWebinar Language: German
Many parameters influence the welding process.
In addition to electrical parameters and, where applicable, manual dexterity in manual processes, wire feeding is usually not a primary focus.
However, the fact that wire feeding systems have a significant impact on a good welding result is often realized too late. We’ll show you how different systems affect the process and how you can make the right choice for your welding task and application. It’s especially worth taking a closer look at wire feeding to avoid mistakes.
-
27 Jan 2027
Fine-Grain Structural Steels! Fundamentals, Processing and Welding Wires
Add to calendarWebinar Language: German
Fine-grained structural steels are used in many welding applications. However, not all fine-grained steels are the same.
The differences in their manufacturing processes and the resulting mechanical properties form the basis for their welding. A look at the relevant standards can also be very helpful in this regard.
Welding consumables for fine-grained structural steels are available both as solid wire and as cored wire, each with its own advantages and disadvantages. The production and properties of these materials are a key focus of this seminar. Of course, standards play an essential role here as well.
Knowledge of the base material and welding consumables is supplemented by processing rules and the influence of parameters, and rounded out with helpful information at the end of the seminar.
-
3 Feb 2027
Product Portfolio and Applications in Wire-Based 3D Welding
Add to calendarWebinar Language: German
The development of welded 3D structures is finding an increasing number of applications.
Wire-based 3D welding in particular—also known as WAAM or DED—is the method of choice for larger structures.
Naturally, special attention is paid to the wire and its quality. After all, the entire component ultimately consists of weld metal and is therefore subject to slightly different principles than those of conventional joint welding. In addition to a historical overview and the variety of different alloys, we focus on the mechanical and technological properties as well as the processing.
-
17 Feb 2027
Choosing the Right Welding Filler Metal for Mixed Joints: A Guide
Add to calendarWebinar Language: German
If “nothing” works, go with “Thermanit X”!
While this is often true, it’s important to take a closer look, especially when it comes to dissimilar metal joints. What’s possible, what isn’t, and where might you need to make compromises? From simple applications to complex metallurgical risks, there are several factors to consider when it comes to mixed-material joints. It’s not uncommon to conclude that it’s better not to weld at all.
This webinar will show you what’s possible in these situations and what you need to keep in mind.
-
24 Feb 2027
LIVE from LINZ (AT)! Health and Safety in Welding Technology - what should be considered when maintaining and inspecting equipment and PPE?
Add to calendarWebinar Language: German
Reporting live from the Open House in Linz, we’ll cover current requirements regarding the inspection and maintenance of work equipment, specifically welding machines and ventilated helmet systems. The importance and necessity of these requirements are clearly defined in regulations and standards and are frequently monitored during audits. Current regulations and increased health awareness make it necessary to take a closer look at this topic.
Please note: Due to ongoing planning, the speakers and exact times have not yet been finalized. An update regarding the event will be automatically distributed once the agenda is finalized.
Would you prefer to attend the event in person rather than online? No problem - please send your request to attend to webinare.deutschland@voestalpine.com.