voestalpine Böhler Welding

URANOS. The new reference for demanding applications.

The premium welding machines of the Uranos series are equipped with numerous technical features. Böhler Welding inverters of the Uranos product line can be used in the MMA manual, TIG AC/DC, MIG / MAG, MIG / MAG pulse and multiprocess and have a power range from 150 to 500 amperes.
They inspire welders, by the demand-based usage of pre-set welding parameters depending on the requirements whilst guaranteeing reproducible and excellent welding results – and thus lasting connections.

What distinguishes URANOS welding machines:

  • Excellent wire feeding properties due to innovative wire feed concept
  • Connection to automation systems and robot systems possible
  • Digital color display for easy process selection
  • Cutting edge digital inverter technology
  • Cost-saving energy efficiency (even in demanding continuous operation)
Welding processes

Welding Processes

More information
Uranos Inverter Products

URANOS Products

More information
Uranos Technology

URANOS Technology

More information

Welding processes

URANOS welding machines can weld the following processes:

  • MIG/MAG Synergic
  • MIG/MAG Pulse Process
  • MMA Process
  • Multi-process
  • TIG AC/DC Process
  • TIG DC HF Process

URANOS welding machines - Product overview

The field of application of URANOS machines is determined by the welding process. Böhler Welding delivers the right welding machine for every process.

MIG/MAG Synergic

URANOS 2000 SMC

URANOS 2000 SMC

Find here more information about URANOS 2000 SMC.

More information
URANOS 2700 SMC

URANOS 2700 SMC

Find here more information about URANOS 2700 SMC.

More information

Technical Specification 

General

Welding processes

MIG/MAG - MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Aluminium - Copper

Dimensions L x W x H

485 x 210 x 400 mm

Weight

12.8 kg

 

Power supply

Voltage (50/60 Hz)

1 x 230Vac ± 15%

Maximum input power

5.7 kVA 

Maximum input current

24.7 A

Power factor PF

1

Efficiency

85 %

Slow blow line fuse

25A

Open circuit voltage

58Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

3 x 2.5 mm2 - 2 m

 

Welding

Adjustment range

3A - 220 A

Duty cycle

MIG / MAG - 40 °C

35 % - 200 A
60 % - 160 A
100 % - 130 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 220 A

Ø Wire diameter

0.8 - 1.0 mm (opz 0.6 - 1.0)

Ø Flux cored wire

0.9 - 1.2 mm

Ø Aluminium wire

0.8 - 1.0 mm

Wire speed

0.5 - 16 m / min

N° rolls

2

Wire spool diameter

Ø 200 mm

Synergic program

19

Welding program memory location

8

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Built-in wire feeder unit (2 rolls drive)
  • Ø 200 mm wire spool compatible
  • Welding polarity switch device
  • Full digital and user-friendly control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (8 free memory locations)
  • Lock-unlock function key protected by password
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with multiple types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2/4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (16 pre-set programs)
  • Wire speed (0,5-16,0 m/min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode

Technical Specification 

 

 2700 CLASSIC

2700 SMART 

 2700 EXCLUSIVE

General

Welding processes

MIG/MAG - MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Aluminium - Copper

Dimensions L x W x H

620 x 270 x 460 mm

620 x 270 x 460 mm

 620 x 270 x 460 mm

Weight

23.7 kg

23.7 kg

23.7 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400/230V ± 15%

 3 x 400/230V ± 15%

 3 x 400/230V ± 15%

Maximum input power

9.1/9.1 kVA 

 9.1/9.1 kVA

 9.1/9.1 kVA

Maximum input current

13.1/22.8 A

13.1/22.8 A

 13.1/22.8 A

Power factor PF

0.94/0.96

0.94/0.96

 0.94/0.96

Efficiency

88/86 %

 88/86 %

 88/86 %

Slow blow line fuse

16/20A

 16/20A

 16/20A

Open circuit voltage

92Vdc

92Vdc

 92Vdc

IP protection rate

IP23S

 IP23S

 IP23S

Insulation class

H

 H

 H

Power supply cable

4 x 2.5 mm2 - 5 m

 4 x 2.5 mm2 - 5 m

 4 x 2.5 mm2 - 5 m

 

Welding

Adjustment range

3A - 270 A

 3A - 270 A

3A - 270 A

Duty cycle

MIG / MAG - 40 °C

45 % - 270 A
 60 % - 250 A
100 % - 230 A

45 % - 270 A
60 % - 250 A
100 % - 230 A

45 % - 270 A
60 % - 250 A
100 % - 230 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 270 A

100 % - 270 A

 100 % - 270 A

Ø Wire Diameter

1.0 - 1.2 mm (opz 0.8 - 1.2)

 1.0 - 1.2 mm (opz 0.8 - 1.2)

1.0 - 1.2 mm (opz 0.8 - 1.2)

Ø Flux cored wire

1.2 - 1.6 mm

 1.2 - 1.6 mm

1.2 - 1.6 mm

Ø Aluminium wire

0.8 - 1.2 mm

0.8 - 1.2 mm

0.8 - 1.2 mm

Wire speed

0.5 - 22.0 m / min

 0.5 - 22.0 m / min

 0.5 - 22.0 m / min

N° rolls

2 (4 opz)

 2 (4 opz)

 2 (4 opz)

Wire spool diameter

Ø 200/300 mm

 Ø 200/300 mm

 Ø 200/300 mm

Synergic program

-

 16

 31

Welding program memory location

-

 -

 64

 U/D MIG/MAG torch compatible

-

 -

 YES

 PUSH PULL torch compatible

-

 -

 YES

 Remote Control

YES

 YES

 YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Built-in wire feeder unit (2/4 rolls drive)
  • Ø 200/300 mm wire spool compatible
  • Welding polarity switch device
  • Full digital and user-friendly control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations) (URANOS 2700 SMC Exclusive)
  • Lock-unlock function key protected by password
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2/4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode (URANOS 2700 SMC
  • MIG/MAG bilevel (URANOS 2700 SMC Smart/Exclusive)
  • Euro adaptor - U/D MIG/MAG torch compatible (URANOS 2700 SMC Exclusive)
  • Push-pull torch device (URANOS 2700 SMC Exclusive)
  • Controlled cooling operations

Pulsed MIG / MAG Process

URANOS 2700 PMC

URANOS 2700 PMC

Find here more information about URANOS 2700 PMC.

More information
URANOS 3200 PME

URANOS 3200 PME

Find here more information about URANOS 3200 PME.

More information
URANOS 4000 PME

URANOS 4000 PME

Find here more information about URANOS 4000 PME.

More information
URANOS 5000 PME

URANOS 5000 PME

Find here more information about URANOS 5000 PME.

More information

Technical Specification

General

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Aluminium - Copper

Dimensions

620 x 270 x 460 mm

Weight

23.7 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

9.1 / 9.1 kVA 

Maximum input current

13.1 / 22.8 A

Power factor PF

0.94 / 0.96 %

Efficiency

88 / 86 %

Slow blow line fuse

16 / 20 A

Open circuit voltage

92 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 2.5 mm2 - 5 m

 

Welding

Adjustment range 

3 - 270 A

Duty cycle

MIG / MAG - 40 °C

45 % - 270 A
60 % - 250 A
100 % - 230 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 270 A

Ø Wire diameter

1.0 - 1.2 mm (opz .0.6 - 1.2)

Ø Flux cored wire

1.2 - 1.6 mm

Ø Aluminium wire

0.8 - 1.2 mm

Wire speed

0.5 - 22 m / min

N° rolls

2 (4 opz)

Wire spool diameter

Ø 200 / 300mm

Synergic program

60

Welding program memory location

64

U / D MIG / MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Built-in wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Ø 200 / 300 mm wire spool compatible
  • Welding polarity switch device
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (60 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Euro adaptor - U / D MIG / MAG torch compatible
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

MIG/MAG - PULSED MIG/MAG - MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminium - Copper - Hardfacing

Dimensions L x W x H

620 x 240 x 460 mm

Weight

27.6 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

13.0 / 13.3 kVA 

Maximum input current

18.8 / 32.9 A

Power factor PF

0.95

Efficiency

85 %

Slow blow line fuse

20 / 30 A

Open circuit voltage

75 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 4 mm2 - 5 m

 

Welding

Adjustment range

3 - 320 A

Duty cycle

MIG / MAG - 40 °C

50 % - 320 A
60 % - 310 A
100 % - 250 A

Duty cycle

MIG / MAG - 25 °C 

70 % - 320 A
100 % - 270 A

Ø Wire diameter (WF 4000)

1.0 - 1.2 mm (opz .0.6 - 1.6)

Ø Flux cored wire (WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300mm

Synergic program

60

Welding program memory location

64

U / D MIG / MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net  compatible

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing

Dimensions L x W x H

690 x 290 x 510 mm

Weight

36.2 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

16.1 / 16.5 kVA 

Maximum input current

24.4 / 43.7 A

Power factor PF

0.95

Efficiency

88 %

Slow blow line fuse

25 / 45 A

Open circuit voltage

73 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 6 mm2 - 5 m

 

Welding

Adjustment range

3 - 400 A

Duty cycle

MIG / MAG - 40 °C

60 % - 400 A
100 % - 360 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 400 A

Ø Wire diameter (WF 4000)

1.0 - 1.2 mm (opz .0.6 - 1.6)

Ø Flux cored wire (WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22.0 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300mm

Synergic program

60

Welding program memory location

64

 U / D MIG / MAG Torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net  compatible

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Wire feeder unit (2/4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Ø 200/300 mm wire spool compatible
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2/4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (80 pre-set programs)
  • Wire speed (0,5-22,0 m/min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG/MAG bilevel
  • Digital MIG/MAG torch compatible
  • Push-pull torch device
  • Remote control compatible
  • WU cooling unit compatible
  • Controlled cooling operations 

Technical Specification

General

Welding processes

MIG/MAG - PULS MIG/MAG - MMA - WIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing

Dimensions L x W x H

690 x 290 x 510 mm

Weight

38.5 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

22.9 / 23.9 kVA 

Maximum input current

33.0 / 61.5 A

Power factor PF

0.95

Efficiency

88 %

Slow blow line fuse

30 / 63 A

Open circuit voltage

73 Vdc

IP protection rate

IP23S

Insulation class 

H

Power supply cable

4 x 4 mm2 - 5 m

 

Welding 

Adjustment range

3 - 500 A

Duty cycle

MIG / MAG - 40 °C

50 % - 500 A
60 % - 470 A
100 % - 420 A

Duty cycle

MIG / MAG - 25 °C 

80 % - 500 A
100 % - 470 A

Ø Wire diameter (WF 4000)

1.0 - 1.2 mm (opz 0.6 - 1.6)

Ø Flux cored wire(WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300mm

Synergic program

80

Welding program memory location

64

U / D MIG / MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net  compatible

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Reduced electromagnetic interference with lift start TIG welding
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (80 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Remote control compatible
  • WU cooling unit compatible
  • Controlled cooling operations

MMA Process

URANOS 1500

URANOS 1500

Find here more information about URANOS 1500.

More information

Technical Specification

 

 1500

 1550 RC

General

Welding processes

MMA - TIG DC Lift

MMA - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Cast irons

Carbon steels - Stainless Steels - Cast irons

Dimensions L x W x H

260 x 120 x 190mm

260 x 120 x 190mm

Weight

2.6 kg

2.6 kg

 

Power supply

Voltage (50/60 Hz)

1 x 230V ± 15 %

1 x 230V ± 15 %

Maximum input power

6.6 kVA

6.6 kVA

Maximum input current

28.7 A

28.7 A

Efficiency

87 %

87 %

Slow blow line fuse

16 A

16 A

Open circuit voltage

85 Vdc

85 Vdc

IP protection rate

IP23S

IP23S

Insulation class

H

H

Power supply cable

3 x 1.5 mm2 - 2 m

3 x 1.5 mm2 - 2 m

 

Welding

Adjustment range 

5 A - 150 A

5 A - 150 A

Duty cycle

MMA - 40 °C

30 % - 150 A
60 % - 125 A
100 % - 110 A

30 % - 150 A 
60 % - 125 A 
100 % - 110 A

Remote Control compatible

-

YES

Suitcase including

  • URANOS 1500
  • Stick electrode holder
  • Earth cable
  • Wire brush and de-slagging hammer
  • Hand-shield
  • Extension carrying strap
  • 20 pcs electrode pack

Technicalities

  • New generation advanced inverter technology power source for high speed dynamic arc control and superior welding performance
  • Heavy duty and enviromental conditions, high service life
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Excellent performances also with long power supply extension cables
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Reduced electromagnetic interference with lift start TIG welding
  • Current socket (panel) 25 mm²

TIG DC HF Process

URANOS 2200 TLH

URANOS 2200 TLH

Find here more information about URANOS 2200 TLH.

More information

Technical Specification

General

Welding processes

TIG DC HF -  TIG DC Lift - MMA

Materials

Carbon steels - Stainless Steels - Cast irons - Copper - Titanium

Dimensions L x W x H

500 x 190 x 400 mm

Weight

14.3 kg

 

Power supply

Voltage (50/60 Hz)

1 x 230 / 115 V ± 15%

Maximum input power

5.2 / 3.4 kVA 

Maximum input current

25.0 / 29.7 A

Power factor PF

0.95

Efficiency

85 %

Slow blow line fuse

16 / 20 A

Open circuit voltage

94 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

3 x 2.5 mm2 - 2 m

 

Welding

Adjustment range

3 - 220 A

Duty cycle

TIG - 40 °C

35 % - 220 A
60 % - 190 A
100 % - 165 A

Duty cycle

TIG - 25 °C 

80 % - 220 A
100 % - 210 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

 

 

Weld @ Net  compatible

YES

Standard EasyArc 

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Bi-Level operating mode
  • Pulsed and fast pulsed operating mode (2500 Hz)
  • Easy joining
  • Manual restart or downslope stop functions
  • Lock-unlock function key protected by password
  • User-defined welding program storage capability (64 free memory locations)
  • Power source trolley for easy system manoeuvrability
  • Low noise
  • Linear controlled fan on demand
  • Current socket (panel) 50 / 70 mm²
  • Digital TIG torch compatible
  • Remote control compatible
  • WU cooling unit compatible
  • Controlled cooling operations

TIG AC/DC Process

URANOS 1700 AC/DC

URANOS 1700 AC/DC

Find here more information about URANOS 1700 AC/DC.

More information
URANOS 2200 AC/DC

URANOS 2200 AC/DC

Find here more information about URANOS 2200 AC/DC.

More information
URANOS 2700 AC/DC

URANOS 2700 AC/DC

Find here more information about URANOS 2700 AC/DC.

More information
URANOS 3200 AC/DC

URANOS 3200 AC/DC

Find here more information about URANOS 3200 AC/DC.

More information
URANOS 4000 AC/DC

URANOS 4000 AC/DC

Find here more information about URANOS 4000 AC/DC.

More information

Technical Specification

General

Welding processes

TIG AC - TIG MIX AC / DC - TIG DC HF -  TIG DC Lift - MMA

Materials 

Carbon steels - Stainless Steels - Aluminum - Nickel - Cast irons - Copper - Titanium

Dimensions L x W x H

500 x 190 x 400 mm

Weight

18.8 kg

 

Power supply

Voltage (50/60 Hz)

1 x 230 / 115 V ± 15%

Maximum input power

5.0 kVA 

Maximum input current

21.7 / 33.3 A

Power factor PF

1

Efficiency

80 %

Slow blow line fuse

16 / 25 A

Open circuit voltage

80 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable 

3 x 2.5 mm2 - 5 m

 

Welding

Adjustment range

3 - 170 A

Duty cycle

TIG - 40 °C

35 % - 170 A
60 % - 150 A
100 % - 130 A

Duty cycle

TIG - 25 °C 

100 % - 170 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

Weld @ Net  compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Bi-Level operating mode
  • Pulsed and fast pulsed operating mode (2500Hz)
  • AC waveform selection (Square, Triangle, Sinusoidal, Mixed)
  • AC frequency adjustment 200 Hz
  • Precise arc striking and high stability arc (fuzzy logic)
  • Electrode tip rounding controlled by easy rounding functionality
  • Easy joining
  • Manual restart or downslope stop functions
  • “Extra energy” setting for deeper penetration
  • Lock-unlock function key protected by password
  • User-defined welding program storage capability (64 free memory locations)
  • Power source trolley for easy system manoeuvrability
  • Low noise
  • Linear controlled fan on demand
  • Current socket (panel) 50/70 mm²
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

TIG AC - TIG MIX AC / DC - TIG DC HF -  TIG DC Lift - MMA

Materials

Carbon steels - Stainless Steels - Aluminum - Nickel - Cast irons - Copper - Titanium

Dimensions L x W x H

500 x 190 x 400 mm

Weight

18.8 kg

 

Power supply

Voltage (50/60 Hz)

1 x 230 / 115 V ± 15%

Maximum input power

6.4 kVA 

Maximum input current

27.6 / 37.2 A

Power factor PF

1

Efficiency

80 %

Slow blow line fuse

20 / 30 A

Open circuit voltage

80 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

3 x 2.5 mm2 - 5 m

 

Welding

Adjustment range

3 - 220 A

Duty cycle

TIG - 40 °C

35 % - 220 A
60 % - 170 A
100 % - 150 A

Duty cycle

TIG - 25 °C 

60 % - 220 A
100 % - 180 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

Weld @ Net  compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Bi-Level operating mode
  • Pulsed and fast pulsed operating mode (2500 Hz)
  • AC waveform selection (Square, Triangle, Sinusoidal, Mixed)
  • AC frequency adjustment 200 Hz
  • Precise arc striking and high stability arc (fuzzy logic)
  • Electrode tip rounding controlled by easy rounding functionality
  • Easy joining
  • Manual restart or downslope stop functions
  • “Extra energy” setting for deeper penetration
  • Lock-unlock function key protected by password
  • User-defined welding program storage capability (64 free memory locations)
  • Power source trolley for easy system manoeuvrability
  • Low noise
  • Linear controlled fan on demand
  • Current socket (panel) 50 / 70 mm²
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

TIG AC - TIG MIX AC / DC - TIG DC HF -  TIG DC Lift - MMA

Materials

Carbon steels - Stainless Steels - Aluminium - Nickel - Cast irons - Copper - Titanium

Dimensions L x W x H

620 x 240 x 460 mm

Weight

27.0 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

10.9 / 11.1 kVA 

Maximum input current

15.8 / 27.2 A

Power factor PF

0.95

Efficiency

80 %

Slow blow line fuse

15 / 20 A

Open circuit voltage

80 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 4 mm2 - 5 m

 

Welding

Adjustment range

3 - 270 A

Duty cycle

TIG - 40 °C

40 % - 220 A
60 % - 250 A
100 % - 230 A

Duty cycle

TIG - 25 °C 

100 % - 270 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

Weld @ Net compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Bi-Level operating mode
  • Pulsed and fast pulsed operating mode (2500 Hz)
  • AC waveform selection (Square, Triangle, Sinusoidal, Mixed)
  • AC frequency adjustment 200 Hz
  • Precise arc striking and high stability arc (fuzzy logic)
  • Electrode tip rounding controlled by easy rounding functionality
  • Easy joining
  • Manual restart or downslope stop functions
  • “Extra energy” setting for deeper penetration
  • Lock-unlock function key protected by password
  • User-defined welding program storage capability (64 free memory locations)
  • Power source trolley for easy system manoeuvrability
  • Low noise
  • Linear controlled fan on demand
  • Current socket (panel) 50 / 70 mm²
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

TIG AC - TIG MIX AC / DC - TIG DC HF -  TIG DC Lift - MMA

Materials

Carbon steels - Stainless Steels - Aluminum - Nickel - Cast irons - Copper - Titanium

Dimensions L x W x H

620 x 240 x 460 mm

Weight

27.5 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

13.8 / 14.3 kVA 

Maximum input current

19.9 / 35.0 A

Power factor PF

0.95

Efficiency

80 %

Slow blow line fuse

15 / 25 A

Open circuit voltage

80 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 4 mm2 - 5 m

 

Welding

Adjustment range

3 - 320 A

Duty cycle

TIG - 40 °C

40 % - 320 A
60 % - 300 A
100 % - 270 A

Duty cycle

TIG - 25 °C 

65 % - 320 A
100 % - 290 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

Weld @ Net  compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Bi-Level operating modePulsed and fast pulsed operating mode (2500 Hz)
  • AC waveform selection (Square, Triangle, Sinusoidal, Mixed)
  • AC frequency adjustment 200 Hz
  • Precise arc striking and high stability arc (fuzzy logic)
  • Electrode tip rounding controlled by easy rounding functionality
  • Easy joining
  • Manual restart or downslope stop functions
  • “Extra energy” setting for deeper penetration
  • Lock-unlock function key protected by password
  • User-defined welding program storage capability (64 free memory locations)
  • Power source trolley for easy system manoeuvrability
  • Low noise
  • Linear controlled fan on demand
  • Current socket (panel) 50 / 70 mm²
  • WU cooling unit compatible
  • Controlled cooling operation

Technical Specification

General

Welding processes

TIG AC - TIG MIX AC / DC - TIG DC HF -  TIG DC Lift - MMA

Materials

Carbon steels - Stainless Steels - Duplex - Aluminum - Nickel - Cast irons - Copper - Titanium

Dimensions L x W x H

690 x 290 x 510 mm

Weight

35.4 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

14.0 / 13.8 kVA 

Maximum input current

20.1 / 33.4 A

Power factor PF

0.95

Efficiency

83 %

Slow blow line fuse

25 / 40 A

Open circuit voltage 

73 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 4 mm2 - 5 m

 

Welding

Adjustment range 

3 - 400 A

Duty cycle

TIG - 40 °C

40 % - 400 A
60 % - 360 A
100 % - 330 A

Duty cycle

TIG - 25 °C 

100 % - 370 A

Welding program memory location

64

U / D TIG Torch compatible

YES

Digital Torch compatible

YES

Remote Control compatible

YES

Weld @ Net  compatible

YES

Standard EasyArc 

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100 % of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Precise arc striking and high stability arc (fuzzy logic)
  • 2 / 4 step operating mode
  • Bi-Level operating mode
  • Pulsed and fast pulsed operating mode (2500 Hz)
  • Easy joining
  • Manual restart or downslope stop functions
  • AC waveform selection (Square, Triangle, Sinusoidal, Mixed)
  • AC frequency adjustment (200 Hz)
  • Electrode tip rounding controlled by easy rounding functionality
  • “Extra energy” setting for deeper penetration
  • Current socket (panel) 50 / 70mm²
  • Smart slope control
  • WU cooling unit compatible
  • Controlled cooling operations

Multiprocess

URANOS 2700 MTE

URANOS 2700 MTE

Find here more information about URANOS 2700 MTE.

More information
URANOS 3200 GSM

URANOS 3200 GSM

Find here more information about URANOS 3200 GSM.

More information
URANOS 4000 GSM

URANOS 4000 GSM

Find here more information about URANOS 4000 GSM.

More information

URANOS 5000 GSM

Find here more information about URANOS 5000 GSM.

More information

Technical Specification

General

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC HF - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Aluminium - Copper

Dimensions L x W x H

620 x 270 x 460 mm

Weight

25.0 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

9.1 / 9.1 kVA 

Maximum input current

13.1 / 22.8 A

Power factor PF

0.94 / 0.96

Efficiency

88 / 86 %

Slow blow line fuse

16 / 20 A

Open circuit voltage

92 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 2.5 mm2 - 5 m

 

Welding

Adjustment range

3 - 270 A

Duty cycle

MIG / MAG - 40 °C

45 % - 270 A 60 % - 250 A 100 % - 230 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 270 A

Ø Wire diameter

1.0 - 1.2 mm (opz 0.6 - 1.2)

Ø Flux cored wire

1.2 - 1.6 mm

Ø Aluminiumwire

0.8 - 1.2 mm

Wire speed

0.5 - 22 m / min

N° rolls

2 (4 opz)

Wire spool diameter

Ø 200 / 300 mm

Synergic program

60

Welding program memory location

64

U/D TIG Torch compatible

YES

Digital TIG Torch compatible

YES

U/D MIG/MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • Reduced dimensions and compact construction
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Built-in wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Ø 200 / 300 mm wire spool compatible
  • Welding polarity switch device
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Precise arc striking and high stability arc
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (60 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Selco Up / Down torch compatible (welding current adjustment)
  • Smart slope control
  • Euro adaptor - U/D MIG/MAG torch compatible
  • Remote control compatible
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC HF - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminium - Copper - Hardfacing

Dimensions L x B x H

620 x 240 x 460 mm

Weight

27.6 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

13.0 / 13.3 kVA 

Maximum input current

18.8 / 32.9 A

Power factor PF

0.95

Efficiency

85 %

Slow blow line fuse

20 / 30 A

Open circuit voltage

75 Vdc

IP protection rate

IP23S

Insulation class 

H

Power supply cable 

4 x 2.5 mm2 - 5 m

 

Welding

Adjustment range

3 - 320 A

Duty cycle

MIG / MAG - 40 °C

50 % - 320 A
60 % - 310 A
100 % - 250 A

Duty cycle

MIG / MAG - 25 °C 

70 % - 320 A
100 % - 270 A

Ø Wire diameter(WF 4000)

1.0 - 1.2 mm (opz 0.6 - 1.6)

Ø Flux cored wire (WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22.0 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300 mm

Synergic program

60

Welding program memory location

64

U/D MIG/MAG torch compatible

YES

U/D TIG Torch compatible

YES

Digital Torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net compatible

YES

Standard EasyArc 

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Ø 200 / 300 mm wire spool compatible
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Precise arc striking and high stability arc
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (60 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Smart slope control
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC HF - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing

Dimensions L x W x H

690 x 290 x 510 mm

Weight

37.5 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

16.1 / 16.5 kVA 

Maximum input current

24.4 / 43.7 A

Power factor PF

0.95

Efficiency

88 %

Slow blow line fuse

25 / 45 A

Open circuit voltage

73 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable

4 x 6 mm2 - 5 m

 

Welding

Adjustment range

3 - 400 A

Duty cycle

MIG / MAG - 40 °C

60 % - 400 A
100 % - 360 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 400 A

Ø Wire diameter (WF 4000)

1.0 - 1.2 mm (opz 0.6 - 1.6)

Ø Flux cored wire (WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22.0 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300 mm

Synergic program

80

Welding program memory location

64

U/D TIG Torch compatible

YES

Digital Torch compatible

YES

U/D MIG/MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy efficiency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Ø 200 / 300 mm wire spool compatible
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Precise arc striking and high stability arc
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (80 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Smart slope control
  • WU cooling unit compatible
  • Controlled cooling operations

Technical Specification

General 

Welding processes

MIG / MAG - PULSED MIG / MAG - MMA - TIG DC HF - TIG DC Lift

Materials

Carbon steels - Stainless Steels - Duplex Steels - Aluminum - Copper - Hardfacing

Dimensions L x W x H

690 x 290 x 510 mm

Weight

39.5 kg

 

Power supply

Voltage (50/60 Hz)

3 x 400 / 230 V ± 15%

Maximum input power

22.9 / 23.9 kVA 

Maximum input current

33.0 / 61.5 A

Power factor PF

0.95

Efficiency

88 %

Slow blow line fuse

30 / 63 A

Open circuit voltage

73 Vdc

IP protection rate

IP23S

Insulation class

H

Power supply cable 

4 x 4 mm2 - 5 m

 

Welding

Adjustment range

3 - 500 A

Duty cycle

MIG / MAG - 40 °C

50 % - 500 A
60 % - 470 A
100 % - 420 A

Duty cycle

MIG / MAG - 25 °C 

100 % - 470 A

Ø Wire diameter (WF 4000)

1.0 - 1.2 mm (opz 0.6 - 1.6)

Ø Flux cored wire (WF 4000)

1.2 - 2.4 mm

Ø Aluminiumwire (WF 4000)

0.8 - 1.6 mm

Wire speed (WF 4000)

0.5 - 22.0 m / min

N° rolls (WF 4000)

2 (4 opz)

Wire spool diameter (WF 3000 / WF 4000)

Ø 200 / 300 mm

Synergic program

80

Welding program memory location

64

U/D TIG Torch compatible

YES

Digital Torch compatible

YES

U/D MIG/MAG torch compatible

YES

PUSH PULL torch compatible

YES

Remote Control compatible

YES

RapiDeep 2.0 compatible

YES

QuickPulse 2.0 compatible

YES

EN 1090 compatible

YES

Weld @ Net compatible

YES

Standard EasyArc

YES

Technicalities

  • "Green @ wave" inverter technology for high energy effi ciency and perfect control over all welding phases
  • High power at 100% of duty cycle
  • Heavy duty and enviromental conditions, high service life
  • CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
  • Software based controls can be upgraded as new features become available
  • High temperature, shockproof, abrasion resistant plastic case
  • Air flow ducting and fully encapsulated PC board to avoid dust contamination
  • Linear controlled fan on demand
  • Energy-saving inverter technology (built-in P.F.C. - power factor controller)
  • Wire feeder unit (2 / 4 rolls drive)
  • Fully voestalpine Böhler Welding designed wire drive unit
  • Full parameters control panel on wire feeder unit
  • Ø 200 / 300 mm wire spool compatible
  • Full digital and user-friendly LCD graphic display control panel
  • Welding parameters digital display
  • Last job settings auto-storage at switch-off
  • User-defined welding program storage capability (64 free memory locations)
  • Totally programmable user interface
  • Programmable welding operations safety limits
  • Lock-unlock function key protected by password
  • Control of several welding units over Ethernet
  • Totally welding process remote programming and management by PC network
  • Ideal for stick welding with multiple types of popular electrodes
  • Built-in adjustable arc control features (hot start, arc force, antisticking)
  • Synergic setting for optimal stick welding with all types of electrodes
  • Precise arc striking and high stability arc
  • 2 / 4 step operating mode
  • Arc dynamic adjustment
  • Perfect arc ignition (soft start - motor slope)
  • Burn-back and droplet detachment correction
  • Crater filler operating mode
  • Synergic operations from databank (80 pre-set programs)
  • Wire speed (0,5 - 22,0 m / min), amperage and piece thickness adjustment
  • Spot welding mode
  • Intermittent welding mode
  • MIG / MAG bilevel
  • Smart slope control
  • WU cooling unit compatible
  • Controlled cooling operations

Technologies

Quickpulse 2.0

quickpulse 2.0

Start your Quickpulse 2.0

Quickpulse 2.0 is easy and fast to use thanks to iPanel, the expanded control panel of URANOS power sources. Program installation is quick and easy thanks to the Weld@Net service kit. After loading the software, simply select the process and desired Synergic program.

Focused arc

  • Extremely stable and concentrated arc
  • Simple parameter control
  • Significant arc noise reduction
  • Increase of penetration depth by up to 40% (depending on application)
  • Clean weld seam
  • Less spatter and reworking

Reduction of the heat-affected zone

Less heat input means lower loads and less deformation, helping to preserve the original mechanical and metallurgical properties.

Higher welding speed

Accelerate your pulsed MIG/MAG process! Thanks to a concentrated arc, the welding speed is up to 50% higher than a standard pulsed MIG/MAG process.

  • Shorter throughput times / welding times
  • Cost reduction
  • Low energy consumption

EasyArc

Easyarc

More than 12 fully integrated welding functions

Just one setting guarantees excellent welding results under all working conditions. The microprocessor control makes the welding of parameters very precise and fast.

Massive reduction of the heat-affected zone

EasyArc automatically selects the most suitable TIG welding parameters to ensure error-free welding.

  • Visually appealing weld seam
  • Reduction of the heat-affected zone by an average of 30%.

Higher welding speed

EasyArc helps to achieve the optimum welding speed.

  • Thanks to the extremely concentrated arc, welding speed can be increased by 50% or as much as 90% over a standard TIG process.

Shorten welding time

  • Energy savings, short preparation and adjustment times for welding
  • Increased productivity and higher quality
  • Less post-processing

RapiDeep 2.0

RapiDeep 2.0

Rapideep

Start your RapiDeep 2.0 welding process

Thanks to RapiDeep 2.0 and the expandable user interfaces (iPanel), the power sources can be controlled quickly and easily. Simply select the process and desired performance curves.

Fully digital welding technology

  • Stable arc even at low current levels
  • Clean weld seams
  • Easier control of the welding process

Reduction of the heat-affected zone

Less thermal input means lower loads and less deformation, helping to preserve the original mechanical and metallurgical properties.

  • Reduction of the heat-affected zone
  • Visually appealing weld seam
  • Less spatter and reworking

Increased welding speed

RapiDeep 2.0 can accelerate your MIG / MAG process.

  • With flawless arc control, welding speed is up to 50% higher than a standard MIG/MAG process.
  • Shorter welding times and lower costs

Weld@Net

weld@net

With our exclusive Weld@Net® software, you can control one or more power sources from your PC and view, adjust and store all welding parameters. 

With Weld@Net® PCM (Production Control Monitor), you can also calculate and monitor quality and productivity of automatic and manual welding systems using an advanced production and cost reporting system.

Modern industrial welding requires complete and detailed control to ensure the efficiency and reliability of the entire production process and to enable correct assessment of welding costs and payback.

Böhler Welding has designed and developed Weld@Net especially for these requirements of industrial welding. Weld@Net is a complete system that includes all the hardware and software components you need to control and manage arc welding data.

Weld@Net at a glance:

  • Hardware and software system for the control and monitoring of industrial welding.
  • All welding parameters of the networked power sources can be easily set from the computer.
  • All parameters of the welding process can be easily and clearly displayed and monitored on the PC.
  • The quality, efficiency and productivity of welding are made available through an advanced reporting system.

What customers particularly like:

  • Simple control of the welding performance curve in real time
  • Available welding reports
  • Precise information on costs and time required for the welding process

Green@wave®

Greenwave

Saving energy - increasing efficiency

URANOS machines are equipped with the patented Green@wave® technology. This technology complies with the EN61000-3-12 standard and enables extremely energy-efficient operation with optimized power consumption.

Saving energy is one of the key measures to balance environmental and economic needs.

voestalpine Böhler Welding is determined to be one step ahead of the competition in this respect as well. With Green@wave®, voestalpine Böhler Welding has developed and patented an environmentally friendly and cost-reducing technical infrastructure for welding power sources.

This new welding technology intelligently uses electrical energy to reduce both energy consumption and CO2 emissions. This promotes conservative use of resources and a reduction in energy costs during the welding process. Machines of the URANOS series are equipped with Green@wave® technology and can be identified by a Green@wave® logo sticker. 

Focus industries

URANOS stands for innovative welding with high efficiency and technological refinement.

Machines in this product line have a user-friendly and intuitive user interface. The welder has pre-set welding programs which make efficient working possible. Uranos can be used for manual welding, but also as a robot power source. Machines of this product line are used mainly in the following industries:

Power plant
Oil&Gas
Chemical Industry
Transport

Böhler Welding Warranty

We stand by our promise of quality

Böhler Welding machines are covered by a five-year warranty (requires registration), giving customers the peace of mind of knowing that they have purchased a high-quality power source.

Trouble-free welding

Robust, reliable design and regular maintenance - guarantees a long product life cycle.

You need a five-year warranty for your machine? No problem. Simply fill out the warranty form and we will send you a warranty confirmation.

Warranty form