CPI components (LNG, urea) require BÖHLER steels and alloys with excellent corrosion resistance and toughness across extreme temperatures. Key quality features include ultra-clean materials, full traceability, controlled heat treatment, and rigorous testing.
Components for the Chemical Process Industry (CPI), including LNG and urea production systems, are exposed to highly aggressive environments characterized by extreme pressures, temperature gradients, and corrosive media such as CO₂, ammonia, chlorides, and cryogenic fluids. Material requirements are therefore exceptionally stringent, focusing on superior corrosion and stress corrosion cracking resistance, high toughness at both elevated and cryogenic temperatures, and long-term microstructural stability under continuous operation. Reliable performance under combined mechanical and chemical loading is essential to ensure plant safety, efficiency, and regulatory compliance.
BÖHLER high-performance steels and alloys are specifically engineered to meet these demanding CPI requirements. Advanced austenitic, duplex, and precipitation-hardened stainless steels, as well as high-alloy and nickel-based materials, provide optimized resistance to corrosion, embrittlement, and thermal degradation. Produced using advanced melting and refining technologies, BÖHLER materials guarantee exceptional cleanliness, low inclusion levels, and homogeneous microstructures, ensuring predictable and reliable performance. Key quality features include strict control of chemical composition, certified traceability, and validated heat treatment processes tailored to application needs. Comprehensive testing, including corrosion resistance, mechanical verification, and non-destructive inspection, ensures compliance with stringent industry standards. BÖHLER materials enable safe, efficient, and long-lasting operation of critical CPI components.
Diely v karbamidovom priemysle, hláv čerpadiel, vretien ventilov, kondenzátorov, reaktorov, odizolovacích nástrojov a kief. Farbiarsky priemysel, napr. bieliace kúpele a farbiarne, textilný, papierenský a kožiarsky priemysel, chemický, farmaceutický priemysel a priemysel plastových vlákien.
Prečítajte si viacKonštrukčné diely v chemickom priemysle, napr. diely odlučovačov a výmenníkov tepla, diely pre papierenský priemysel, ťažbu ropy a zemného plynu, kompresory a pre odsoľovanie morskej vody.
Prečítajte si viacKonštrukčné diely, na ktoré pôsobí morská voda, napr. výmenníky tepla, dopravné alebo vstrekovacie čerpadlá, hriadele vrtúľ, vysoko namáhané diely v chemických a odvodňovacích zariadeniach a na dopravu ropy a zemného plynu (napr. rozvodné diely), odlučovače, lopatky turbín a ventilátorov, komponenty nízkotlakových kompresorov.
Prečítajte si viacPre konštrukčné diely veľmi zaťažené chemickou koróziou, napr. zariadenia chladené morskou vodou a na morských vrtných plošinách. V oblastiach chemického priemyslu, kde pri vyšších tlakoch a teplotách dochádza k zaťaženiu v čistých kyselinách ako aj v kyselinách s obsahom chlóru (hlavne kyselina sírová), organických kyselinách a zmesiach kyselín. V dôsledku zvýšenej odolnosti voči štrbinovej korózii je možné použitie aj všade tam, kde sa počíta s tvorbou povlaku, resp. kde sa nedá konštrukčnými opatreniami zabrániť štrbinám.
Prečítajte si viacH500 – Žiaruvzdorná oceľ
Prečítajte si viacBÖHLER L625 is a non-magnetizable corrosion and heat resistant nickel alloy in the form of bars, forgings and semi-finished products up to max 254 mm diameter/ cross-section and oxidation resistant up to 1093°C. Best fatigue strength and resistance to stress corrosion cracking when exposed to chloride containing media. Good weldability.
Prečítajte si viacBÖHLER L625 AMPO je žiaruvzodrná, nemagnetická zliatina na báze niklu odolná proti korózii, s vysokou húževnatosťou a pevnosťou od teplôt pod bodom mrazu až do 1000 °C. Ľahko vytlačiteľná.
Prečítajte si viacBÖHLER L718 AMPO je žiarupevná vytvrditeľná zliatina na báze niklu s obzvlášť vysokou medzou pevnosti a medzou klzu do teploty 750°C a s exelentnou medzou tečenia do 700 °C. Okrem toho má vynikajúcu odolnosť proti korózii a je ľahko vytlačiteľná.
Prečítajte si viacPoužíva sa pre vysoko namáhané diely plynových turbín, pohonov, čerpadiel a jadrových reaktoroch. Používa sa pre pretláčacie nástroje pre meď a medené zliatiny, pre dierovanie za tepla ocelí a mosadzných zliatin, pre kovacie zápustky a nože pre strihanie za tepla.
Prečítajte si viacBÖHLERL718 API (UNS N07718) is a high-strength, corrosion-resistant nickel-chromium-iron-molybdenum material with excellent corrosion resistance, especially in H2S and CO2 environments. The alloy is age-hardenable due to the addition of niobium, titanium and aluminium. BÖHLER L718 API is recognised by the oil industry for its simple and cost-effective production in combination with good tensile, fatigue, creep and fracture strength and is used in a wide range of applications in this sector. BÖHLER L718 API has excellent weldability and is resistant to cracking after welding. The material can be used at high temperatures. BÖHLER L718 API is available in the NACE/API 6A CRA versions with a minimum yield strength of 120/140 ksi and also in the high-strength version with 150 ksi. All hardness grades are suitable for sour service and can be used for pressurising and pressure-controlling equipment in corrosive environments. Typical applications include packers, pumps, connectors and fasteners as well as gate valves, throttle spindles, pipework hangers and fire safe valves, but also a wide range of downhole and completion components, nuclear and surface applications.
Prečítajte si viacBÖHLER L718 API AMPO je žiarupevná vytvrditeľná zliatina na báze niklu s obzvlášť vysokou medzou pevnosti a medzou klzu do teploty 750°C a s excelentnou medzou tečenia do 700 °C. Okrem toho má vynikajúcu odolnosť proti korózii a je ľahko vytlačiteľná.
Prečítajte si viacN400 – Nehrdzavejúca oceľ
Prečítajte si viac