Aerospace components require high‑purity steels and alloys with excellent strength, fatigue resistance, and stability. Key quality features include certified materials, full traceability, controlled heat treatment, non‑destructive testing, and compliance with aerospace standards.
General aerospace components are designed for operation in highly demanding environments where safety, reliability, and performance are critical. Material requirements are driven by extreme mechanical loads, wide temperature ranges, fatigue exposure, and, in many cases, corrosive atmospheres. Steels and advanced alloys used in aerospace applications must exhibit high strength‑to‑weight ratios, excellent fatigue resistance, fracture toughness, and long‑term dimensional stability. Material cleanliness and controlled microstructure are essential to prevent premature failure.
Commonly used steels include high‑strength low‑alloy steels, martensitic and precipitation‑hardened stainless steels, and vacuum‑melted aerospace grades to ensure low inclusion content. Nickel‑based and titanium alloys are applied for elevated‑temperature performance and weight reduction. Quality features are governed by aerospace standards and include full material traceability, certified chemical composition, validated heat treatment, and strict process control. Non‑destructive testing, dimensional verification, and surface integrity inspections are standard to guarantee compliance, repeatability, and safe operation throughout the component’s service life.
BÖHLER L625 AMPO is een niet magnetische, zeer corrosiebestendige Nikkel basis legering. Hoge sterkte en taaiheid vanaf cryogene temperature tot aan 1000 °C. Goede 3D print eigenschappen.
Lees meerBÖHLER L718 AMPO is een hardbare Nikkel basis super legering. Dit materiaal is bestand tegen zeer hoge temperaturen en heeft zowel voldoende sterkte tot 750 °C, als weerstand tegen kruip tot 700 °C. Bovendien is het zeer goed bestand tegen corrosie en is het zeer geschikt om 3D te printen. In grote lijnen kunnen dezelfde eigenschappen worden verwacht zowel bij conventioneel gemaakte delen als bij onderdelen die door middel van dit poeder zijn geprint.
Lees meerBÖHLER N700 AMPO (17-4 PH) is een nikkel martensitisch staal wat gehard wordt door precipitatie uitscheiding. Door zijn legeringselementen heeft het een uitstekende corrosieweerstand. Het is eenvoudig 3D printbaar zonder voorverwarming en het hardt uit tot HRC 40 na oplossend gloeien en verouderend gloeien.
Lees meerHoogbelaste onderdelen voor de luchtvaart- en rakettentechniek. Constructie- en gereedschapsstaal voor koud- en warmwerk bij langdurige belasting tot ongeveer 450°C. Gereedschappenmachinebouw, drukvaten, tandwielen (genitreerd), schroeven, precisie-onderdelen, gereedschappen voor hydrostatische persen, gereedschappen voor koude extrusie, gereedschappen voor koudstuiken en stampen, kunststofmatrijzen, drukgietgereedschappen voor aluminium- en zinklegeringen, gereedschappen voor warmpersen.
Lees meer