Press hardening heats steel blanks and forms them in cooled dies, creating ultra‑strong martensitic parts. Using alloyed steels and cooled tooling, the process enables lightweight, crash‑resistant automotive components like pillars, bumpers, and door rings.
Press hardening, also known as hot forming, is a thermo‑mechanical process used to manufacture ultra‑high‑strength steel components with complex geometries. Steel blanks or cold formed shapes—typically made of manganese–boron alloys such as 22MnB5—are heated to around 900–950°C, transforming the microstructure into austenite. The hot blank is transferred into a water‑cooled die set, where forming and quenching occur in a single step(direct process). The indirect process uses a cold formed preform which is adequately heated. Rapid cooling inside the closed tooling converts the austenite into martensite, achieving strengths above 1500 MPa and keeps the shape to close tolerances. Typical tooling is made of a wide range of Hot Work and Cold Work Tool Steels or even HSS, depending on the actual load conditions and process details. Tooling is designed with integrated cooling channels, high‑temperature inserts, and durable coatings to withstand thermal cycling and maintain dimensional precision. Process control includes furnace heating, transfer time, forming speed, and die temperature. Press‑hardened components are widely used in automotive safety structures such as A‑ and B‑pillars, bumper beams, door rings, and roof rails, enabling lightweight designs with superior crash performance and high energy absorption.
BÖHLER W302 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2344 (X40CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as very high hot hardness and a very good resistance against heat-checkings. The combination of these properties makes it a top performer in closed- and open-die forging as well as in high- and low-pressure die casting. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.
Read MoreBÖHLER W302 ISODISC is a 5% chromium steel and corresponds to material number 1.2344 (X40CrMoV5-1). This common tool steel has good hot toughness as well as a high hot hardness and a high resistance against heat-checkings. The combination of these properties makes it a standard choice in extrusion, forging and low-pressure die casting. This material is also available as W302 ISOBLOC which is a remelted grade with improved cleanliness, homogeneity and toughness.
Read MoreThe BÖHLER W360 AMPO is the powder equivalent of the W360 ISOBLOC. Due to its chemical composition, the material belongs to the product group of hot-work tool steels. After hardening and tempering, it can achieve a hardness of up to 57 HRC with very good toughness properties. Its high temperature wear resistance, heat resistance and toughness characterizes the material. Applications: Printed components with conformal cooling for die casting applications, wear protection layers and repair work in mold making using laser cladding.
Read MoreBÖHLER W360 ISOBLOC is a material produced by the electroslag remelting process (ESR), which has been specially adapted for use at high tool hardnesses in the range of 51-57 HRC. Although the steel can be classified as a 5% chromium steel, the increased carbon and molybdenum content coupled with state-of-the-art manufacturing technology ensures that BÖHLER W360 ISOBLOC still shows a very good toughness and an exceptionally good thermal resistance, even at high hardness levels. These properties make the steel the perfect choice for smaller components in the die casting sector (e.g., mold inserts, cores, core pins, ejector pins, etc.). The material also is frequently the preferred choice for closed-die and open-die forging tools due to its high wear resistance. Because of this excellent wear resistance and the high toughness, BÖHLER W360 ISOBLOC is also frequently used for cold work applications and as a molding material for plastic injection molds. The Steel also is available as powder material for metal-3D-printing under the brand name BÖHLER W360 AMPO.
Read MoreBÖHLER W403 VMR is a vacuum remelted material which was developed as a problem solver for tools for where a standard solution is no longer sufficient. The steel can be assigned to the 5% chromium steels and has a very high purity due to the special manufacturing technology. In addition, the increased molybdenum content leads to improved thermal resistance as well as wear resistance, which makes BÖHLER W403 VMR an all-rounder that is often used for highly stressed dies in the die casting sector. In addition, Böhler W403 VMR has outstanding polishability. For this reason, the steel is also popular as a molding material for plastic injection molds.
Read MoreUddeholm Dievar is a premium steel developed for the demanding application of high pressure casting. With new process improvements and development for use in large sizes, Uddeholm Dievar’s quality and toughness is better than ever. It is the industry benchmark for a high performance steel for the longest tool life and lowest crack risks due to its superior toughness and ductility. Apart from die casting it has proven itself as a great tool steel for other applications such as forging, extrusion and hot stamping. Uddeholm Dievar is also available for Additive Manufacturing, powder for processing Laser Powder Bed Fusion (LPBF) and Laser Metal Deposition (LMD). Benefits Uddeholm Dievar has superior heat checking and hot properties over AISI H13 and AISI H11 Perfect for large structural dies Standard specification AISI H13 / AFNOR Z35 CDV 5.3
Read MoreUddeholm Orvar Supreme can be regarded as an “all-round” steel used in several application areas. Except for hot work application areas the steel is also used in moulds for plastics and as a material in high stressed axles. The high degree of purity and the very fine structure shows improvement in dies and components where high mechanical and thermal stresses are involved. Proven over and over again Uddeholm Orvar Supreme has stood the test of time and remains well known in the tooling industry for its high and reliable performance and ease of machining. Benefits Improved tooling performance Uddeholm Orvar Supreme meets the North American Die Casting Association (NADCA) #207 requirements for Superior high quality H-13 die steel. Standard specification W.nr 1.2344 / AISI H13 / AFNOR Z38 CDV 5.1
Read MoreExisting customers – need quotes fast?
Check stock availability and get pricing 24/7. Ask your local voestalpine sales team about access to our digital webshop.
Please Note: select the Melbourne office for all Adelaide and South Australia enquiries.