Thread rolling forms threads by cold‑deforming steel, aluminum, or titanium with hardened dies. The chipless process creates strong, fatigue‑resistant threads for bolts, screws, studs, automotive and aerospace parts with high accuracy and production efficiency.
Thread rolling is a chipless cold‑forming process used to create external threads by plastically deforming material between hardened dies. Unlike cutting, rolling displaces material to form the thread profile, producing stronger surfaces with improved fatigue resistance due to work hardening and compressive residual stresses. The process is performed at room temperature on ductile materials such as carbon and alloy steels, stainless steels, aluminum, copper alloys, and titanium grades suited for cold deformation. Tooling includes flat dies, cylindrical dies, or planetary dies made from high‑speed steel and Cold Work Tool Steels or Cemented Carbide, engineered with precise thread geometry and surface treatments to endure high contact pressures. Proper lubrication, alignment, and feed settings ensure accurate pitch, flank angles, and surface finish. Thread rolling is widely used for fasteners, bolts, screws, studs, automotive drivetrain components, aerospace fittings, and medical implants, offering high production rates, excellent repeatability, and superior mechanical performance compared to cut threads.
BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.
Read MoreBÖHLER K340 ECOSTAR belongs to the group of conventionally produced 8% chromium steels. Compared to conventional 12% chromium steels, this conventionally smelted tool steel has better toughness, hardening response and higher adhesive wear resistance. This combination of high adhesive wear resistance and toughness also offers advantages for industrial knives subject to high stress. This grade is also used for stamping and cutting tools.
Read MoreBÖHLER K340 ISODUR belongs to the group of 8% chromium steels. This tool steel is produced using the electro-slag remelting (ESR) process developed by BÖHLER. This re-melting technology ensures the lowest micro and macro segregation as well as excellent purity and uniformity of the material. Compared to conventional 12% chromium steels, BÖHLER K340 ISODUR offers significantly better toughness, hardening response and higher resistance to adhesive wear. This material is therefore used in virtually all cold work applications in situations where tool steels like 1.2379 are insufficient in terms of adhesive wear resistance and toughness. K340 ISODUR also features better machinability and reduces the risk of stress cracking during electrical discharge machining.
Read MoreBÖHLER S600 – “The high-speed steel” Ideal for mills, twist drills, and taps, broaches, cold-work tools. BÖHLER S600 is the most commonly used high-speed steel and is the starting material for our customers who deal with high-speed steel.
Read MoreUddeholm Sleipner is a general purpose steel for cold work tooling. It has a mixed-abrasive wear profile and a good resistance to chipping. Furthermore a high hardness (>60 HRC) can be obtained after high temperature tempering. This means that surface treatments such as nitriding or PVD can be made on a high strength substrate. Also, it means that complicated shapes with hardness levels >60 HRC can be wire EDM’d from blocks with relatively thick cross-sections with a much reduced risk of cracking. Uddeholm Sleipner is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required. Benefits Very broad property profile Very good steel for all types of surface treatments Extremely versatile conventional tool steel for medium run cold work tooling Suitable upgrade where added chipping or wear resistance is needed over traditional AISI A2 or AISI D2 In East/South East Asian countries served by ASSAB, Uddeholm Sleipner is sold as ASSAB 88.
Read MoreUddeholm Vanadis 4 Extra SuperClean is the most versatile pm tool steel on the market today, combining high wear resistance with very good ductility and resistance to chipping of edges. Excellent machinability in both soft and hard condition ensures advantages in both tool making and tool maintenance. Uddeholm Vanadis 4 Extra SuperClean is also available as powder for processing by electron beam melting technology (EBM). This powder has the same chemical composition as the PM material. Benefits Reliable production with low risk of edge chipping Best combination of high hardness, wear resistance and chipping resistance High compressive strength Best stock standard program of all PM grades Standard specification AISI D2 / AFNOR de type Z136 CDV 5.4
Read MoreUddeholm Vanadis 8 SuperClean sets a new standard for Powder Metallurgical Tool Steel. The technological advancements makes this cold work tool steel superior to its predecessors. The unprecedented combination of extremely high wear and chipping resistance paired with improved machining properties raises production rates and reduces costs. Benefits Lower price per produced part Longer tool life Predictable Production Standard specification AISI D2 / AFNOR de type Z230VCD8.5.4
Read MoreExisting customers – need quotes fast?
Check stock availability and get pricing 24/7. Ask your local voestalpine sales team about access to our digital webshop.
Please Note: select the Melbourne office for all Adelaide and South Australia enquiries.