Cutting

BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.

BÖHLER K340 ECOSTAR belongs to the group of conventionally produced 8% chromium steels. Compared to conventional 12% chromium steels, this conventionally smelted tool steel has better toughness, hardening response and higher adhesive wear resistance. This combination of high adhesive wear resistance and toughness also offers advantages for industrial knives subject to high stress. This grade is also used for stamping and cutting tools.

BÖHLER K340 ISODUR belongs to the group of 8% chromium steels. This tool steel is produced using the electro-slag remelting (ESR) process developed by BÖHLER. This re-melting technology ensures the lowest micro and macro segregation as well as excellent purity and uniformity of the material. Compared to conventional 12% chromium steels, BÖHLER K340 ISODUR offers significantly better toughness, hardening response and higher resistance to adhesive wear. This material is therefore used in virtually all cold work applications in situations where tool steels like 1.2379 are insufficient in terms of adhesive wear resistance and toughness. K340 ISODUR also features better machinability and reduces the risk of stress cracking during electrical discharge machining.

BÖHLER K490 MICROCLEAN is a high-performance cold work tool steel with a balanced property profile, manufactured using powder metallurgy. This powder metallurgical tool steel offers an outstanding combination of high wear resistance, compressive strength, toughness and very good machinability. Thanks to the resulting flexibility, BÖHLER K490 MICROCLEAN is used in virtually all cold work applications, and in many cases this material is the first choice for newly developed tools. The commonly used hardening temperatures of BÖHLER K490 MICROCLEAN also enable shared heat treatment with popular cold work tool steels (1.2379, D2), making it very economical in terms of heat treatment.

BÖHLER M333 ISOPLAST is a corrosion-resistant, martensitic plastic mold steel with excellent polishability and toughness for products with highest surface requirements. BÖHLER M333 ISOPLAST is also approved for food and beverage contact.

BÖHLER M340 ISOPLAST corresponds to a corrosion-resistant, martensitic chromium steel with improved wear resistance. This is ideal for the application area of glass fiber reinforced plastics. In addition, the BÖHLER M340 ISOPLAST is approved for food and beverage contact.

BÖHLER M380 ISOPLAST is a high-nitrogen alloyed, corrosion-resistant, martensitic plastic mold steel electro-slag remelted under pressure with excellent corrosion resistance, very good polishability and very high toughness combined with a high hardness of up to 60 HRC. In addition, BÖHLER M380 ISOPLAST is approved for contact with food and beverage.

BÖHLER M390 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has very high wear resistance and good corrosion resistance. In addition, BÖHLER M390 MICROCLEAN is approved for food and beverage contact.

Corrosion resistant, martensitic  13 % Cr steel grade for example special knives , scissors, table knives, kitchen knives and machining cutting knives.

BÖHLER N678 is a hardenable corrosion resistant Cr-Mo steel grade with addition of Vanadium for hardened tools and parts with good corrosion resistance in sea water and chloric medias.

Corrosion resistant, martensitic 13% Cr steel grade with Cb addition for example special knives, scissors, table knives, kitchen knives and machining cutting knives.

Hardenable Cr– and Mo alloyed steel grade with additions of Vanadium and Nitrogen with excellent corrosion resistance especially in sea water and chloric medias.

BÖHLER N685 is a corrosion-resistant, martensitic chromium steel with a high carbon content and molybdenum and vanadium additives.

BÖHLER N690 is a corrosion-resistant, martensitic chromium steel with a high carbon content and the addition of cobalt, molybdenum and vanadium. BÖHLER N690 is also approved for food and beverage contact.

BÖHLER N695 is a corrosion-resistant, martensitic chromium steel with a high carbon content and added molybdenum.

BÖHLER N695SA is a high-grade, vacuum remelted chromium stainless steel of aerospace quality, offering high hardness, wear resistance, and good corrosion resistance in the quenched and tempered condition. Compared to air-melted quality, this steel exhibits improved rolling contact fatigue properties and is typically used for components requiring hardness up to 58 HRC and resistance to wear, corrosion, and oxidation—such as balls, rollers, needles, and rings for corrosion-resistant bearings—although its use is not limited to these applications.

The BÖHLER W360 AMPO is the powder equivalent of the W360 ISOBLOC. Due to its chemical composition, the material belongs to the product group of hot-work tool steels. After hardening and tempering, it can achieve a hardness of up to 57 HRC with very good toughness properties. Its high temperature wear resistance, heat resistance and toughness characterizes the material. Applications: Printed components with conformal cooling for die casting applications, wear protection layers and repair work in mold making using laser cladding.

BÖHLER W360 ISOBLOC is a material produced by the electroslag remelting process (ESR), which has been specially adapted for use at high tool hardnesses in the range of 51-57 HRC. Although the steel can be classified as a 5% chromium steel, the increased carbon and molybdenum content coupled with state-of-the-art manufacturing technology ensures that BÖHLER W360 ISOBLOC still shows a very good toughness and an exceptionally good thermal resistance, even at high hardness levels. These properties make the steel the perfect choice for smaller components in the die casting sector (e.g., mold inserts, cores, core pins, ejector pins, etc.). The material also is frequently the preferred choice for closed-die and open-die forging tools due to its high wear resistance. Because of this excellent wear resistance and the high toughness, BÖHLER W360 ISOBLOC is also frequently used for cold work applications and as a molding material for plastic injection molds. The Steel also is available as powder material for metal-3D-printing under the brand name BÖHLER W360 AMPO.

At voestalpine we combine premium material know-how with tailored application requirements. This results in premium high-performance solutions, which are ready to use for industrial food processing applications. Our Bowl Cutter Knives offer an outstanding balance of high wear resistance, ductility (safety against cracks), and corrosion resistance, allowing for a significantly extended regrinding interval for higher productivity and a lower total cost of ownership. voestalpine Bowl Cutter Knives are available for all brands of industrial bowl cutters.

voestalpine Poultry Processing Technology incorporates our premium materials by BÖHLER/Uddeholm, including tailored heat treatment and machining. This ready-to-use solution offers an extended lifetime and improved processing properties. We have knives available for all industrial machine types and major producers of poultry processing machinery.