Valves and Actuators

BÖHLER A903 (UNS S32205) is the most common stainless ferritic-austenitic Cr-Ni-Mo steel with nitrogen addition. In addition to good strength properties, this steel offers high corrosion resistance, especially against stress corrosion cracking in chloride-containing solutions, and is resistant to intergranular corrosion up to 300°C. The alloy should not be used at temperatures above 300°C due to embrittlement. Heat treatment after welding is not necessary. Required surface finish: pickled, scale-free heat treated or machined. Commonly used in the oil and gas industry, hydroelectric power, pressure vessels, pulp and paper industry, components and chemical tanks, such as parts for separators and heat exchangers and parts in the paper industry, oil and gas extraction , compressors, seawater desalination.

BÖHLER A911SA is a ferritic-austenitic stainless steel of Type 25%Cr with PREN of min. 40. It offers excellent corrosion resistance against general corrosion, stress corrosion cracking, corrosion fatigue, pitting, crevice and erosion corrosion and possessing very high mechanical strength properties. However, it contains less copper compared to other super Duplex SS but a deliberate addition of tungsten instead, claimed to selectively improve corrosion resistance. Good weldability, post weld heat treatment not necessary. Max. temperature for long periods of service: 280°C (535°F ) / (300°C/570°F possible for short periods). Surface condition for optimum corrosion resistance: pickled or machined. Components in offshore, waste water, sea water desalination and chemical plants with aggressive chloride-containing media e.g. heat exchangers, separator parts, compressor and pump components, turbine blades.

Bohler A913 (UNS S32750) is the most widely used super duplex grade on the market and is a 25%Cr ferritic-austenitic stainless steel with PREN min 41. The steel offers highest corrosion resistance and good strength properties and is especially suitable for use in aggressive environments containing chlorides. Good weldability, heat treatment after welding is not required. Excellent resistance to general corrosion, stress corrosion cracking, vibration cracking, pitting and crevice corrosion as well as erosion corrosion. Max. operating temperature for long-term use: 280°C (short-term exceeding up to 300°C permissible). Required surface finish: pickled or machined. Components exposed to seawater such as heat exchangers, feed or injection pumps, propeller shafts, highly stressed parts in chemical and waste water plants and for oil and gas production (e.g. manifolds), separators, turbine and fan blades, low-pressure compressor components.

BÖHLER A930 is a stainless ferritic-austenitic steel of the 25%Cr type. Highest corrosion resistance and good strength properties. Good weldability, heat treatment after welding is not required. Excellent resistance to general corrosion, stress corrosion cracking, vibration cracking, pitting and crevice corrosion as well as erosion corrosion. Max. operating temperature for long-term use: 280°C (short-term exceeding up to 300°C permissible). Required surface finish:pickled or machined. BÖHLER A930 (UNS S32550, 1.4507, F61) is the original super duplex stainless steel. As such, it was the first alloy to be called “super duplex” and is based on a chromium content of 25 %. Compared to the later alternatives UNS S32750 and UNS S 32760, it is the only grade with an increased copper content for better pitting corrosion resistance. Components in offshore, waste water, seawater desalination and chemical plants with aggressive chloride-containing media, e.g. heat exchangers, separator parts, compressor and pump components, turbine blades.

BÖHLER A965SA is an austenitic stainless steel alloy with 6% molybdenum and nitrogen. It has very high resistance to crevice and surface corrosion and was specially developed for the requirements of the chemical industry, the pulp and paper industry and the oil/gas industry. Due to its PREN value of over 40, the material is particularly resistant to seawater and is therefore often used in offshore technology. Furthermore, BÖHLER A965SA is resistant to intergranular corrosion up to 400°C. The required surface finish is pickled, scale-free heat treated or machined. For applications in highly corrosive environments due to chemically aggressive media, e.g. for equipment and installations cooled with seawater and parts for offshore installations. In the chemical industry, where resistance to attack by pure acids as well as chloride ion-containing acids (especially sulphuric acid), organic acids and mixed acids in the higher pressure and temperature range is required. The increased resistance to crevice corrosion also allows the use where incrustations must be expected and / or where the formation of crevices cannot be avoided by constructive measures.

BÖHLER L004 belongs to the group of highly corrosion-resistant nickel-chromium-molybdenum alloys with very low carbon, iron and silicon content and has good corrosion resistance, even at elevated temperatures. The combination of chromium with a high molybdenum content gives BÖHLER L004 exceptional resistance to a wide range of chemical media: e.g. contaminated, reducing mineral acids and good resistance under reducing and oxidizing conditions, e.g. hot, contaminated media such as sulphuric acid, nitric acid, dry chlorine, formic acid, acetic acid, solvents, chlorine and chloride-containing media. BÖHLER L004 exhibits a significantly reduced tendency to form precipitates in the temperature range between 650 and 1,040 °C due to the alloy composition. This improves resistance to intergranular corrosion. Due to the high nickel content, the material is practically insensitive to chloride-induced stress corrosion cracking even in hot chloride solutions. Due to its excellent thermal stability, the alloy can be welded without any problems and is generally used in the welded condition. Suitable for pressure vessels with wall temperatures from-196°C to 400°C.

BÖHLER L022 belongs to the group of highly corrosion-resistant nickel-chromium-molybdenum-tungsten alloys with extremely low carbon and silicon contents. Good resistance to wet media, e.g. sulphuric acid, nitric acid, acid mixtures of sulphuric acid and oxidising acids with chloride ions. Recommended for use in the presence of strong oxidising agents such as iron(III) and copper(II) chlorides, chlorine gas, formic acid, acetic acid, seawater and other salt solutions. High resistance to crevice, pitting and stress corrosion cracking at elevated temperatures under oxidising and reducing conditions. Used in environmental engineering, e.g. in agitators, heat exchangers and spray systems in flue gas cleaning plants and in waste water treatment plants, evaporation plants in chemical process engineering, in chlorine bleaching plants and plants for the production of chlorine gas and hydrogen chloride, e.g. butterfly valves, gate valves, pipelines and centrifuges. Suitable for pressurised containers with wall temperatures from-196°C to 400°C. Due to its good thermal stability, BÖHLER L022 can generally be used in the welded condition without subsequent heat treatment.

BÖHLER L059 (2.4605/N06059) is a nickel-chromium-molybdenum material with high mechanical strength and excellent corrosion resistance. Due to its particularly low carbon and silicon content, the material does not tend to form precipitates at grain boundaries during welding or hot forming. BÖHLER L059 offers excellent corrosion resistance, both under oxidizing and reducing conditions, high resistance to chloride-induced pitting and crevice corrosion as well as insensitivity to stress corrosion cracking and resistance to mineral acids, especially sulphuric/hydrochloric acid mixtures. The alloy is therefore suitable for a wide range of applications in the chemical, petrochemical, energy and environmental technology sectors in chloride-containing media, in particular plant components in the pharmaceutical industry and also agitators for flue gas desulphurization plants (FGD) in fossil-fired power plants and waste incineration plants, components for seawater and concentrated brines, equipment and components for geothermal and sour gas applications, reactors for acetic acid and acetic anhydride as well as hydrofluoric acid and sulphuric acid coolers.

BÖHLER L276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including ferric and cupric chlorides, hot contaminated mineral acids, solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, sea water and brine solutions and hypochlorite and chlorine dioxide solutions. BÖHLER L276 also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition. BÖHLER L276 has excellent resistance to pitting and stress corrosion cracking. Some typical applications of BÖHLER L276 include equipment components in chemical and petrochemical organic chloride processes and processes utilizing halide or acid catalysts. Other industry applications are pulp and paper (digesters and bleach areas), scrubbers and ducting for flue gas desulfurization, pharmaceutical and food processing equipment.

BÖHLER L625 is a non-magnetizable corrosion and heat resistant nickel alloy in the form of bars, forgings and semi-finished products up to max 254 mm diameter/ cross-section and oxidation resistant up to 1093°C. Best fatigue strength and resistance to stress corrosion cracking when exposed to chloride containing media. Good weldability.

BÖHLERL718 API (UNS N07718) is a high-strength, corrosion-resistant nickel-chromium-iron-molybdenum material with excellent corrosion resistance, especially in H2S and CO2 environments. The alloy is age-hardenable due to the addition of niobium, titanium and aluminium. BÖHLER L718 API is recognised by the oil industry for its simple and cost-effective production in combination with good tensile, fatigue, creep and fracture strength and is used in a wide range of applications in this sector. BÖHLER L718 API has excellent weldability and is resistant to cracking after welding. The material can be used at high temperatures. BÖHLER L718 API is available in the NACE/API 6A CRA versions with a minimum yield strength of 120/140 ksi and also in the high-strength version with 150 ksi. All hardness grades are suitable for sour service and can be used for pressurising and pressure-controlling equipment in corrosive environments. Typical applications include packers, pumps, connectors and fasteners as well as gate valves, throttle spindles, pipework hangers and fire safe valves, but also a wide range of downhole and completion components, nuclear and surface applications.

BÖHLER L925 (UNS N09925) is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminium and is designed for high strength and excellent corrosion resistance. The nickel content provides protection against chloride-ion stress corrosion cracking and, in combination with molybdenum and copper, also offers excellent resistance to reducing chemicals. Molybdenum aids resistance to pitting and crevice corrosion. The chromium content of the alloy ensures resistance in oxidising environments. The alloy exhibits a high degree of corrosion resistance in H2S and CO2 environments and is particularly suitable for sour (H2S-containing) crude oil, natural gas, sulphuric acid, phosphoric acid and seawater. BÖHLER L925 offers high strength and maintains this strength even at high temperatures. BÖHLER L925 meets the requirements of NACE MR0175 and API 6A CRA for acidic applications and can be used for pressure-maintaining and pressure-controlling equipment in corrosive environments. Typical applications include packers, safety valves, pumps, hangers, connectors, fasteners and numerous downhole and surface applications.

BÖHLER N114 is a modified 13% chromium steel with special soft magnetic properties, namely very low coercive force and high electrical resistance. Due to the high sulphur content, the material can be machined very well, for example on automatic machining centres. BÖHLER N114 has very good hot and cold extrusion properties. Used for stainless parts for mechanical and electrical engineering, e.g. solenoid valves, pistons, back-locking parts, pole cores, shields and magnetic armatures. Delivery condition annealed ex works. A final annealing treatment for magnetic properties must be carried out after cold forming, e.g. extrusion, upsetting or extensive machining processes.

BÖHLER N400 is a stainless soft martensitic Cr steel with 4% nickel with molybdenum addition and medium corrosion resistance in media with only a low chloride content. To achieve the best possible corrosion resistance with BÖHLER N400, it is essential to polish the surfaces concerned. Good mechanical properties in the quenched and tempered condition. This makes this material very suitable for use in turbine and power plant construction. Very good low-temperature properties. Recommended temperature of use: – 60 to 350°C. Use for valves, pumps, compressors, centrifuges, hydroelectric machines, turbines, reactor technology, shipbuilding, chemicals. Special heat treatment to max. 23 HRC is required for sour gas enviroment in petroleum engineering.

BÖHLER N404 is a stainless, soft martensitic Cr steel with 5% nickel and molybdenum addition with higher corrosion resistance than that of stainless steels of type 1.4313. The molybdenum addition also permits limited use in the maritime sector. BÖHLER N404 is particularly insensitive to intergranular corrosion and very resistant to fatigue and stress corrosion cracking and offers good mechanical properties in the quenched and tempered condition. This makes this material very suitable for use in the oil and gas sector, e.g. for fittings, pumps, compressors, centrifuges, hydropower machinery, reactor technology, shipbuilding, chemicals, petroleum technology, aviation and refrigeration technology. Very good low-temperature properties. Recommended application temperature from – 60 to 350°C. Special heat treatment to max. 23 HRC is required for sour gas stress in petroleum technology. In order to achieve the best possible corrosion resistance, the relevant surfaces must be polished.

BÖHLER N700 is a corrosion-resistant steel in the form of bars, wire and forgings in the solution-annealed condition. It is a martensitic, precipitation-hardenable chromium-nickel-copper steel with high strength and toughness. Further increases in strength can be achieved by cold forming and subsequent precipitation hardening. These products are typically used for parts that require higher corrosion resistance than the usual 13% or 17% chromium steels and high strength up to 316 °C. However, their use is not limited to such applications. Remelting processes are used to improve steel purity and homogeneity. (ESR, PESR, VAR) Certain processing methods and operating conditions can make these products susceptible to stress corrosion cracking. For applications such as bolting where stress corrosion cracking is possible, the product should be aged for at least 4 hours at the highest temperature compatible with the strength requirements, but in no case lower than 552 °C. Typical applications for reactor construction and highly stressed pump parts, springs and ship shafts.

BÖHLER P511 is a weldable, non-magnetic, austenitic steel with resistance to seawater and intergranular corrosion. This austenitic, stainless Cr-Ni-Mn-Mo-N steel has higher corrosion resistance than Cr-Ni-Mo grades 316, 316L, 317 and 317L and approximately twice the yield strength at room temperature. In addition, BÖHLER P511 has very good mechanical properties at both high and low temperatures. Unlike many austenitic stainless steels, it does not become magnetic when cold-formed or cooled to sub-zero temperatures. Thanks to its excellent notched impact strength at -196 °C (-320 °F), BÖHLER P511 is particularly suitable for low-temperature applications. Typical applications are found in the oil and gas, chemical, fertilizer, paper, textile, food and marine industries for components requiring a combination of excellent corrosion resistance and high strength, e.g. pumps, valves and fittings, fasteners, cables, chains, ship fittings, boat and valve shafts, heat exchanger parts and springs.

BÖHLER P513 is a weldable, non-magnetic, austenitic stainless steel with resistance to seawater and intercrystalline corrosion. It offers the best abrasion resistance of all stainless steels. The corrosion resistance of BÖHLER P513 is better than that of conventional austenitic Cr-Ni steels (type 304), and even better than Cr-Ni-Mo steel (type 316) under standard test conditions against chloride pitting, stress corrosion cracking and crevice corrosion. BÖHLER P513 is an alloy with a high silicon and manganese content and added nitrogen, which also works well at high temperatures around 1800 ºF. Silicon and manganese prevent wear and scuffing even in the annealed condition. Higher strengths can be achieved by cold forming, but this does not significantly improve abrasion resistance. BÖHLER P513 is used in the aerospace, food and pharmaceutical, oilfield, petrochemical, surgical and chemical industries, e.g. for valve stems and valve seats, fastening systems, shielding, chain drive systems, pins, bushings and roller bearings, wear rings and pistons in pumps.

BÖHLER P800 is a soft magnetic Fe-17% Co- alloy with high magnetic saturation. It has been developed for use in high performance actuator systems especially in the area of Diesel Injection Systems. Thanks to the high magnetic saturation of min 2,14 T (at min. 400 A/cm), the cobalt-iron alloy generally is suitable for all applications where high flux density and minimum weight is required. Due to the moderate Co content BÖHLER P800 is optimized for challenging technical applications under economically sensitive conditions. Delivery condition as rolled. The alloy can be cold formed. A final annealing treatment for magnetic properties is to be carried out after cold reforming, such as extrusion, upsetting or extensive machining operations.

BÖHLER T200 covers a corrosion and heat resistant steel in the form of bars, wire, forgings and forging stock. It is an austenitic, precipitation hardenable, iron-nickel-chromium-molydenum-titanium steel of ESR quality. Alloying elements of aluminium and titanium allow this material to undergo precipitation hardening (ageing) through the formation of intermetallic phases. The addition of molybdenum increases the mechanical properties and resistance to creep at high temperatures. These products are typically used for parts in the oil and gas industry requiring moderate strength up to 704 °C (1300 °F) and oxidation resistance up to 816 °C (1500 °F), but their use is not limited to such applications.