17-4PH Stainless Steel

    17-4PH

    17-4PH (UNS S17400) is an Age Hardened Martensitic Stainless Steel with excellent machinability and good corrosion resistance.  The material can be hardened to different strength levels to accommodate the specified requirements of the designed component. vSM stocks multiple conditions of 17-4 bar including the H1150M and DH 1150 for NACE service.

    For inquires and technical info call us today at + 1 800-704-6866

    Request a quote today

    17-4PH Specification/Condition

    • Stocking the following conditions
      • Annealed
      • H900
      • H1025
      • H1075
      • H1150M NACE
      • DH1150 NACE

    Applications

    • valves
    • pump shafts
    • rotors

    17-4PH Technical Data

    • UTS (KSI): 135 Min
    • Yield 0.2% Offset (KSI): 110 Min
    • EL (% Min): 18
    • RA (% Min): 55
    • Hardness (HRC): 28-32
    • Charpy Impact Min. ft-lbs: 20 @-75°F

    Stocking Dimensions

    • Bar: 0.5 – 15.0 in
    • Bored Bar with bespoke internal diameters via vSM’s in-house deep hole drilling and honing capabilities

     

    17-4PH Chemical composition (Wt %)

     

    Carbon
    (C)
    Manganese
    (Mn)
    Phosphorus
    (P)
    Sulfur
    (S)
    Silicon
    (Si)
    Nickel
    (Ni)
    Cobalt
    (Co)
    0.07 Max 1.00 Max 0.040 Max 0.030 Max 1.00 Max 3.0-5.0

     

    Chromium
    (Cr)
    Molybdenum
    (Mo)
    Niobium + Tantalum
    (Nb (Cb) + Ta)
    Titanium
    (Ti)
    Copper
    (Cu)
    Aluminum
    (Al)
    Iron (Fe) & Others
    15.0-17.5 0.15-0.45 Max 3.00-5.00 Fe– Balance

     

    Request a quote today
    Please use a browser that is not outdated.

    You are using an outdated web browser.

    Errors may occur when using the website.