Wear applications in mining require BÖHLER steels with high hardness, toughness, and abrasion resistance. Key quality features include ultra-clean materials, full traceability, controlled heat treatment, and rigorous testing for durable performance.
Wear applications in the mining industry, such as liners, crusher components, chutes, and transport systems, are exposed to extreme abrasion, impact, and erosive conditions caused by hard rocks, minerals, and slurry flows. Material requirements are therefore focused on maximum wear resistance, high hardness, and sufficient toughness to withstand dynamic loads and prevent brittle failure. In addition, resistance to surface fatigue, deformation, and corrosive environments is essential to ensure reliable operation and extended service life under continuous heavy-duty conditions.
BÖHLER high-performance steels and alloys are specifically developed to meet the challenges of severe wear applications. Advanced tool steels, high-strength alloy steels, and specially engineered wear-resistant grades provide an optimized balance between hardness and impact toughness. Produced using advanced melting technologies, BÖHLER materials offer superior cleanliness and homogeneous microstructures, minimizing crack initiation and improving resistance to abrasive and impact wear. Key quality features include strict chemical composition control, certified material traceability, and precisely controlled heat treatment processes to achieve tailored hardness profiles. Comprehensive testing, including wear resistance, impact strength, and non-destructive inspection, ensures consistent performance. BÖHLER materials enable durable, efficient, and cost-effective solutions for demanding mining wear applications.
BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.
Read MoreBÖHLER K390 MICROCLEAN is a high-alloyed, high-performance cold work tool steel manufactured using powder metallurgy. This material has the highest alloy content in the group of cold work tool steels with high vanadium content. The high alloy content gives this material outstanding wear resistance. At the same time, the powder metallurgical manufacturing process creates a uniform matrix with finely distributed primary carbides. Among other things, this leads to good material toughness. BÖHLER K390 MICROCLEAN is a problem solver for applications requiring extremely high wear resistance and compressive strength.
Read MoreBÖHLER K888 MATRIX – This MATRIX steel offers an excellent combination of high toughness and high compressive strength. MATRIX materials have high toughness, which is a critical factor in many applications. However, the hardness achievable with commonly used MATRIX steels often limits the potential applications. BÖHLER K888 MATRIX breaks through this barrier and offers the best of both worlds of matrix steels and high alloy tool steels. BÖHLER K888 MATRIX is a unique problem solver in situations where high compressive strength and toughness are required. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings.
Read MoreBÖHLERL718 API (UNS N07718) is a high-strength, corrosion-resistant nickel-chromium-iron-molybdenum material with excellent corrosion resistance, especially in H2S and CO2 environments. The alloy is age-hardenable due to the addition of niobium, titanium and aluminium. BÖHLER L718 API is recognised by the oil industry for its simple and cost-effective production in combination with good tensile, fatigue, creep and fracture strength and is used in a wide range of applications in this sector. BÖHLER L718 API has excellent weldability and is resistant to cracking after welding. The material can be used at high temperatures. BÖHLER L718 API is available in the NACE/API 6A CRA versions with a minimum yield strength of 120/140 ksi and also in the high-strength version with 150 ksi. All hardness grades are suitable for sour service and can be used for pressurising and pressure-controlling equipment in corrosive environments. Typical applications include packers, pumps, connectors and fasteners as well as gate valves, throttle spindles, pipework hangers and fire safe valves, but also a wide range of downhole and completion components, nuclear and surface applications.
Read MoreBÖHLER M310 ISOPLAST is a corrosion-resistant, martensitic chromium steel which, through electroslag remelting and optimization of the chemical composition, has a good homogeneity and a balanced hardness-toughness-corrosion resistance ratio.
Read MoreBÖHLER M390 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has very high wear resistance and good corrosion resistance. In addition, BÖHLER M390 MICROCLEAN is approved for food and beverage contact.
Read MoreBÖHLER N690 is a corrosion-resistant, martensitic chromium steel with a high carbon content and the addition of cobalt, molybdenum and vanadium. BÖHLER N690 is also approved for food and beverage contact.
Read MoreBÖHLER S390 MICROCLEAN – “The decathlete” This grade is our PM steel with many positive usage properties. For twist drills, taps, mills, broaches, or cold-work applications, BÖHLER S390 MICROCLEAN is always a high performer.
Read MoreBÖHLER S600 – “The high-speed steel” Ideal for mills, twist drills, and taps, broaches, cold-work tools. BÖHLER S600 is the most commonly used high-speed steel and is the starting material for our customers who deal with high-speed steel.
Read MoreBÖHLER S690 MICROCLEAN – “The simple one” The tough high-speed steel for challenging machining and cold forming.
Read MoreFields marked with * are mandatory.