Cold Work Tool Steels

BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.

BÖHLER K294 MICROCLEAN is a cold work tool steel manufactured using powder metallurgy and belongs to the group of 10% vanadium steels. The high content of vanadium carbides makes this steel highly resistant to wear. The toughness is at the same level as conventional 12% chromium steels. BÖHLER K294 MICROCLEAN is used in situations where wear resistance is the decisive factor and toughness is of secondary importance.

BÖHLER K360 ISODUR belongs to the group of 8% chromium steels. This tool steel is produced using the electro-slag remelting (ESR) process developed by BÖHLER. This re-melting technology ensures the lowest micro and macro segregation as well as excellent purity and uniformity of the material. The alloy composition with higher molybdenum and vanadium content makes BÖHLER K360 ISODUR even more wear resistant than BÖHLER K340 ISODUR. Compared to tool steels like 1.2379 (D2), this combination of better toughness and wear resistance offers significant advantages for punching and cutting tools.

BÖHLER K390 MICROCLEAN is a high-alloyed, high-performance cold work tool steel manufactured using powder metallurgy. This material has the highest alloy content in the group of cold work tool steels with high vanadium content. The high alloy content gives this material outstanding wear resistance. At the same time, the powder metallurgical manufacturing process creates a uniform matrix with finely distributed primary carbides. Among other things, this leads to good material toughness. BÖHLER K390 MICROCLEAN is a problem solver for applications requiring extremely high wear resistance and compressive strength.

BÖHLER K888 MATRIX – This MATRIX steel offers an excellent combination of high toughness and high compressive strength. MATRIX materials have high toughness, which is a critical factor in many applications. However, the hardness achievable with commonly used MATRIX steels often limits the potential applications. BÖHLER K888 MATRIX breaks through this barrier and offers the best of both worlds of matrix steels and high alloy tool steels. BÖHLER K888 MATRIX is a unique problem solver in situations where high compressive strength and toughness are required. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings.

BÖHLER K890 MICROCLEAN is a high-performance cold work tool steel manufactured using powder metallurgy. It features good toughness, very high compressive strength and excellent fatigue strength. This favorable combination of properties can avoid chipping damages to tools. BÖHLER K890 MICROCLEAN is not only used in cold work applications, but also in mold making.

Uddeholm Sleipner is a general purpose steel for cold work tooling. It has a mixed-abrasive wear profile and a good resistance to chipping. Furthermore a high hardness (>60 HRC) can be obtained after high temperature tempering. This means that surface treatments such as nitriding or PVD can be made on a high strength substrate. Also, it means that complicated shapes with hardness levels >60 HRC can be wire EDM’d from blocks with relatively thick cross-sections with a much reduced risk of cracking. Uddeholm Sleipner is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required. Benefits Very broad property profile Very good steel for all types of surface treatments Extremely versatile conventional tool steel for medium run cold work tooling Suitable upgrade where added chipping or wear resistance is needed over traditional AISI A2 or AISI D2 In East/South East Asian countries served by ASSAB, Uddeholm Sleipner is sold as ASSAB 88.

Uddeholm Vanadis 8 XL is specifically developed for extremely demanding tool steel applications where abrasive wear is the primary challenge. Its exceptional wear resistance makes it an ideal substitute for hard metals, especially in applications involving highly abrasive working materials. Uddeholm Vanadis 8 XL is not only strong and durable, but also a well-thought-out, sustainable choice. The longer tool life means fewer tool changes and less maintenance, saving time, costs, resources and is also cobalt-free, supporting our customers’ goals to reduce their environmental impact. By offering Uddeholm Vanadis 8 XL, we are taking concrete steps for a sustainable future. Benefits With its superior wear resistance, Uddeholm Vanadis 8 XL offers a sustainable and cost-effective alternative to cemented carbide in the most demanding tool applications. Standard specification AISI M2 / W.nr 1.3343

A2 tool steel is a medium alloyed steel with good resistance to abrasive and adhesive wear and cracking. This combination makes A2 an all purpose tool steel for medium run cold work applications. Best Coatings Duplex-VARIANTIC® delivers superior wear resistance and toughness in cold forming and fine blanking — extending tool life and reducing downtime in medium-run applications. Find the perfect match to boost durability and performance in cold work! Check our coating guide to discover the best solution for your application.

D2 tool steel is a high carbon, high chromium air hardening steel known for its excellent wear resistance and edge retention. It’s commonly used in cutting tools, dies, and industrial applications requiring high durability and toughness. Best Coatings Duplex-VARIANTIC® delivers exceptional surface hardness and wear resistance through a combined nitriding and PVD coating process, extending tool life and improving performance in cold forming, stamping, and other cold work operations. Boost your cold work tools’ lifetime and efficiency. Explore our coating guide for the perfect fit.