Other Aerospace Components

BÖHLER L625 is a non-magnetizable corrosion and heat resistant nickel alloy in the form of bars, forgings and semi-finished products up to max 254 mm diameter/ cross-section and oxidation resistant up to 1093°C. Best fatigue strength and resistance to stress corrosion cracking when exposed to chloride containing media. Good weldability.

BÖHLER L625 AMPO is a non-magnetic, corrosion and scale-resistant nickel-base alloy. High toughness and strength from the lowest temperatures up to 1000 °C. Good printability.

The BÖHLER L718 AMPO is a hardenable nickel-base super alloy. This high heat-resistant material shows good strength properties at elevated temperatures up to 750 ° C, as well as excellent creep resistance up to 700 ° C. In addition, it shows excellent corrosion resistance and good printability. Essentially, the same properties can be achieved with printed components made from this powder as with bar material.

BÖHLER N695 is a Chromium alloyed stainless steel with high hardness, wear resistance and good corrosion resistance in the hardened and tempered condition. this grade is typically used for parts requiring hardness up to 58 HRC and resistance to wear, corrosion, and oxidation, e.g. balls, rollers, needles and rings for corrosion resistant bearings, but usage is not limited to such applications.

BÖHLER N695SA is a high-grade, vacuum remelted chromium stainless steel of aerospace quality, offering high hardness, wear resistance, and good corrosion resistance in the quenched and tempered condition. Compared to air-melted quality, this steel exhibits improved rolling contact fatigue properties and is typically used for components requiring hardness up to 58 HRC and resistance to wear, corrosion, and oxidation—such as balls, rollers, needles, and rings for corrosion-resistant bearings—although its use is not limited to these applications.

BÖHLER N700 AMPO (17-4 PH) is a precipitation hardening nickel martensitic steel. Thanks to its alloying system, this material has excellent corrosion resistance. Can be printed very easily without additional heating of the platform or chamber and, after solution annealing and aging, hardens up to approx. 40 HRC.

Components featuring elevated high-temperature strength for use in thermal engines and power plants, such as turbine blades, turbine discs, screws, bolts, pins and shafts.

Fine grain structure, low porosity and excellent machining characteristics all define the cost saving and value added attributes of every block and plate of ACP 5080R. Outstanding industry leading material dimensional stability along with good mechanical and physical properties and an extraordinary range of sizes allow users of ACP 5080R to utilize Alimex’s material and knowledge expertise at its finest. Being an industry innovator and leader, Alimex was the first to introduce aluminum cast plate (ACP 5080R) manufactured to AA 5083 alloy specifications.

What is H13 ESR Tool Steel? H13 ESR is a high-purity, electro-slag remelted (ESR) variant of standard H13 tool steel, offering superior cleanliness, improved toughness, and better isotropic properties. The ESR process refines the steel’s structure, making it the preferred choice for high-performance hot work tooling, die casting, and plastic molds requiring exceptional thermal and mechanical properties. Best Coatings We offer outstanding wear resistance and low friction through our DLC and PVD ultrafine coatings, ideal for hot work tooling where lubricants cannot be used, ensuring longer tool life and consistent performance in demanding molding processes. Explore our coating guide to select the ideal solution for your tooling needs.