Grinding operations in food processing require wear- and corrosion-resistant BÖHLER steels with high hardness and hygiene performance. Key quality features include ultra-clean materials, controlled heat treatment, full traceability, and verified surface quality for safe processing.
Grinding operations in food and beverage processing require materials capable of maintaining consistent performance under high wear, mechanical stress, and strict hygienic conditions. Components such as grinder plates, knives, and mills are exposed to abrasion from processed materials, cyclic loading, and frequent cleaning with aggressive agents. Material requirements therefore focus on high hardness, wear resistance, corrosion resistance, and toughness to prevent chipping or premature failure. In addition, excellent surface quality and cleanability are essential to ensure food safety and avoid contamination.
BÖHLER high-performance steels and alloys are specifically engineered for these demanding applications. Advanced martensitic stainless steels and wear-resistant tool steels offer an optimized balance of hardness, edge retention, and corrosion resistance. Produced using advanced melting technologies, BÖHLER materials ensure high purity and homogeneous microstructures, enabling extended service life and reliable operation. Key quality features include precise control of chemical composition, certified traceability, and validated heat treatment processes to achieve consistent hardness and wear properties. Surface integrity and hygienic performance are verified through strict inspection and testing. BÖHLER materials support efficient, safe, and durable grinding operations in modern food processing environments.
BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.
Read MoreBÖHLER K888 MATRIX – This MATRIX steel offers an excellent combination of high toughness and high compressive strength. MATRIX materials have high toughness, which is a critical factor in many applications. However, the hardness achievable with commonly used MATRIX steels often limits the potential applications. BÖHLER K888 MATRIX breaks through this barrier and offers the best of both worlds of matrix steels and high alloy tool steels. BÖHLER K888 MATRIX is a unique problem solver in situations where high compressive strength and toughness are required. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings.
Read MoreBÖHLER N690 is a corrosion-resistant, martensitic chromium steel with a high carbon content and the addition of cobalt, molybdenum and vanadium. BÖHLER N690 is also approved for food and beverage contact.
Read MoreUddeholm Sleipner is a general purpose steel for cold work tooling. It has a mixed-abrasive wear profile and a good resistance to chipping. Furthermore a high hardness (>60 HRC) can be obtained after high temperature tempering. This means that surface treatments such as nitriding or PVD can be made on a high strength substrate. Also, it means that complicated shapes with hardness levels >60 HRC can be wire EDM’d from blocks with relatively thick cross-sections with a much reduced risk of cracking. Uddeholm Sleipner is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required. Benefits Very broad property profile Very good steel for all types of surface treatments Extremely versatile conventional tool steel for medium run cold work tooling Suitable upgrade where added chipping or wear resistance is needed over traditional AISI A2 or AISI D2 In East/South East Asian countries served by ASSAB, Uddeholm Sleipner is sold as ASSAB 88.
Read MoreUddeholm Tyrax ESR combines best in class toughness, corrosion and wear resistance. This grade was developed for molding of high performance plastics often filled with glass fiber reinforcements and additives like flame retardants. This matrix- based microstructure is designed to achieve a high-gloss surface by only a few polishing steps, dramatically reducing the tool lead time and enabling production of top quality plastic parts. Uddeholm Tyrax ESR can achieve a high hardness (up to 58 HRC) and is a suitable upgrade from AISI 420 ESR, AISI S7 and AISI 440C. Benefits good dimensional stability at heat treatment and in service even microstructure and small grain size good hardenability Uddeholm Tyrax is also available for Additive Manufacturing, powder for processing Laser Powder Bed Fusion (LPBF) and Laser Metal Deposition (LMD).
Read MoreFields marked with * are mandatory.