Racing

The newly developed, patent pending, BÖHLER E185 AMPO is an AM powder, fulfilling the highest demands from various industries, ranging from motorsport to engineering components and any kind of prototype applications. This low alloyed steel with easy printability and the possibility for surface treatments (e.g. case hardening or nitriding) was developed especially for the demands of the 3D printing industry. The material shows an excellent combination of strength and toughness.

BÖHLER M121 ISOPLAST is a remelted nickel-chromium-molybdenum case-hardening steel for components with increased requirements for toughness and core strength.

BÖHLER M789 AMPO is a newly developed maraging steel, which combines the mechanical properties of 1.2709 with the corrosion resistance of 17-4PH. This patent bending grade can easily printed without any preheating and achieves a hardness of about 52 HRC with a very easy heat treatment. Furthermore, this material shows an excellent polishability, which makes it the ideal choice for inserts with conformal cooling in plastic injection molding and in any other application where a high hardness and corrosion resistance is of need.

BÖHLER N700 AMPO (17-4 PH) is a precipitation hardening nickel martensitic steel. Thanks to its alloying system, this material has excellent corrosion resistance. Can be printed very easily without additional heating of the platform or chamber and, after solution annealing and aging, hardens up to approx. 40 HRC.

BÖHLER S390 MICROCLEAN – “The decathlete” This grade is our PM steel with many positive usage properties. For twist drills, taps, mills, broaches, or cold-work applications, BÖHLER S390 MICROCLEAN is always a high performer.

BÖHLER S790 MICROCLEAN – “The 1st MICROCLEAN” High-speed steel manufactured in a powder metallurgy process, with good hot hardness, compressive strength, and wear resistance. PM technology gives it good toughness and excellent workability, including the best machinability.

BÖHLER V132 is a premium aircraft-quality, low-alloy Ni-Cr-Mo steel in the form of bars, forgings and forging stock requiring high tensile and toughness values, particular in large cross sections in the hardened and tempered condition. These products have been used typically for parts requiring a through-hardening capability up to 3.5 inches (89 mm) in nominal thickness at time of heat treatment but usage is not limited to such applications. E.g. highly stressed components and parts for the aircraft industry, Tracks, helicopter shafts, bolts and screws.

BÖHLER V180 VMR is a high-quality, low-alloy Ni-Cr-Mo-V steel with a high silicon and vanadium content, available in bars and forgings for components with a nominal cross-sectional thickness of up to 3.5 inches (89 mm) that require the highest strength and toughness values, especially for large cross-sections in the quenched and tempered condition. This steel is typically used for parts that require a through-hardening steel with a minimum hardness of 53 HRC and can be used to produce finished parts that must meet the most stringent testing standards. Due to the higher Si and V content of BÖHLER V180 VMR, this high-strength steel offers improved mechanical and fatigue properties compared to the standard 300M grade and is used for mechanically highly stressed parts with high fatigue loads, such as torsion bars, gears, and transmission shafts, primarily in racing and automotive engineering, but also in mechanical engineering. The dual vacuum melting process, using vacuum induction melting (VIM) and subsequent vacuum arc remelting (VAR), ensures a high degree of purity and homogeneity and also enhances the fatigue properties of the manufactured parts.

BÖHLER V358 in the British Standard Aerospace Series is a 3% Cr-Mo-V nitriding steel offering a tensile strength of 1,320-1,470 MPa, combined with excellent hardenability for high core strength and develops a hard wear resistant case after surface treatment. The alloy is produced by vacuum arc remelting. (VAR) Typical applications are gear shafts and crankshafts with maximum diameter of 70mm for the aircraft industry and automtovie components.

BÖHLER V361 is a 3% Cr-Mo-V nitriding low-alloy steel of premium aircraft-quality, low-alloy steel offering a tensile strength of up to over 1350MPa in the form of bars, forgings, and forging stock. Due to the optimized production route via VIM-melting and VAR-remelting, the steel offers high impact strength and fatigue limit. It may be nitrided in the heat treated condition to obtain a wear resistant surface. It is used typically for nitrided parts such as bearings, operating under heavy loads and high speeds at moderate temperatures, and requiring highest surface hardness, high core toughness, and less distortion than parts made from case hardening steel, but usage is not limited to such applications.

BÖHLER W460 VMR is a double vacuum arc remelted (VAR) material that has been specially adapted for use in the motorsport sector. The steel purity achieved by this special manufacturing technology, combined with the high strength, ensures that a very high fatigue strength can be guaranteed. The high purity also results in very good polishability, which makes the steel a good choice as a tool material for minting coins.

Percipitation hardening nickel martensitic (marging) steel, material number 1.2709, which offers a good combination of strength and toughness. Can be printed very easily without additional heating of the building plattform or chamber. The achievable hardness of 55 HRC makes this material a universal solution for tool steel applications in which conformal cooling is required, such as die casting applications.