Components

BÖHLER K490 MICROCLEAN is a high-performance cold work tool steel with a balanced property profile, manufactured using powder metallurgy. This powder metallurgical tool steel offers an outstanding combination of high wear resistance, compressive strength, toughness and very good machinability. Thanks to the resulting flexibility, BÖHLER K490 MICROCLEAN is used in virtually all cold work applications, and in many cases this material is the first choice for newly developed tools. The commonly used hardening temperatures of BÖHLER K490 MICROCLEAN also enable shared heat treatment with popular cold work tool steels (1.2379, D2), making it very economical in terms of heat treatment.

BÖHLER M303 is a corrosion-resistant, martensitic chromium steel with very good toughness, corrosion resistance, good wear resistance and improved machinability and polishability. Compared to 1.2316, BÖHLER M303 has better homogeneity and is approved for food and beverage contact.

BÖHLER M303 ISOPLAST corresponds to a remelted BÖHLER M303 . The variation in the production route enables greater toughness and polishability thanks to higher purity and improved homogeneity. Also available as product variant BÖHLER M303HH ISOPLAST (high-hard variant).

BÖHLER M310 ISOPLAST is a corrosion-resistant, martensitic chromium steel which, through electroslag remelting and optimization of the chemical composition, has a good homogeneity and a balanced hardness-toughness-corrosion resistance ratio.

BÖHLER M315 is a prehardened, corrosion-resistant martensitic plastic mold steel. Due to its chemical composition, BÖHLER M315 has improved machinability compared to 1.2085 and is approved for food contact.

BÖHLER M333 ISOPLAST is a corrosion-resistant, martensitic plastic mold steel with excellent polishability and toughness for products with highest surface requirements. BÖHLER M333 ISOPLAST is also approved for food and beverage contact.

BÖHLER M340 ISOPLAST corresponds to a corrosion-resistant, martensitic chromium steel with improved wear resistance. This is ideal for the application area of glass fiber reinforced plastics. In addition, the BÖHLER M340 ISOPLAST is approved for food and beverage contact.

BÖHLER M368 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to the alloy concept and the production route, the steel has a high wear resistance, high corrosion resistance and high toughness. In addition, BÖHLER M368 MICROCLEAN is approved for food and beverage contact.

BÖHLER M380 ISOPLAST is a high-nitrogen alloyed, corrosion-resistant, martensitic plastic mold steel electro-slag remelted under pressure with excellent corrosion resistance, very good polishability and very high toughness combined with a high hardness of up to 60 HRC. In addition, BÖHLER M380 ISOPLAST is approved for contact with food and beverage.

BÖHLER M390 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has very high wear resistance and good corrosion resistance. In addition, BÖHLER M390 MICROCLEAN is approved for food and beverage contact.

BÖHLER M398 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has good corrosion resistance and higher wear resistance compared to BÖHLER M390 MICROCLEAN.

BÖHLER N700 AMPO (17-4 PH) is a precipitation hardening nickel martensitic steel. Thanks to its alloying system, this material has excellent corrosion resistance. Can be printed very easily without additional heating of the platform or chamber and, after solution annealing and aging, hardens up to approx. 40 HRC.

Uddeholm RoyAlloy is a high-performance stainless mould base tool steel designed to deliver exceptional durability and efficiency in demanding tooling environments. It is developed to meet the requirements of mould bases and moulds where demands on surface finish, service life, and corrosion resistance are more moderate. The material offers an attractive balance between performance, machinability, and cost, making it a competitive option for standard applications in the plastics industry. Benefits Unlike conventional stainless steels, RoyAlloy is supplied in a pre-hardened condition of approximately 30 HRC, eliminating the need for additional heat treatment. This significantly reduces lead times and production costs while ensuring dimensional stability throughout machining and finishing processes. RoyAlloy’s superior corrosion resistance sets it apart in applications where moisture or humid environments can compromise tool life. By minimizing rust and surface degradation, it ensures longer service intervals and reduced maintenance costs. The material’s homogeneous structure and stable mechanical properties provide good dimensional stability and sufficient strength for applications involving short to medium production runs or less demanding plastics. The steel’s weldability and repairability further enhance its value, allowing easy maintenance and extending tool lifespan.

Uddeholm Vanadis 4 Extra SuperClean is the most versatile pm tool steel on the market today, combining high wear resistance with very good ductility and resistance to chipping of edges. Excellent machinability in both soft and hard condition ensures advantages in both tool making and tool maintenance. Uddeholm Vanadis 4 Extra SuperClean is also available as powder for processing by electron beam melting technology (EBM). This powder has the same chemical composition as the PM material. Benefits Reliable production with low risk of edge chipping Best combination of high hardness, wear resistance and chipping resistance High compressive strength Best stock standard program of all PM grades Standard specification AISI D2 / AFNOR de type Z136 CDV 5.4