Secure material today and access a wide range of different dimensions.
Make a requestBÖHLER L004 belongs to the group of highly corrosion-resistant nickel-chromium-molybdenum alloys with very low carbon, iron and silicon content and has good corrosion resistance, even at elevated temperatures. The combination of chromium with a high molybdenum content gives BÖHLER L004 exceptional resistance to a wide range of chemical media: e.g. contaminated, reducing mineral acids and good resistance under reducing and oxidising conditions, e.g. hot, contaminated media such as sulphuric acid, nitric acid, dry chlorine, formic acid, acetic acid, solvents, chlorine and chloride-containing media.
Due to its composition, BÖHLER L004 shows a significantly reduced tendency to form precipitates in the temperature range between 650 and 1,040 °C. This improves the resistance to intergranular corrosion. Due to the high nickel content, the material is practically insensitive to chloride-induced stress corrosion cracking even in hot chloride solutions. Due to its excellent thermal stability, the alloy is easily weldable and is usually used in the welded condition. Suitable for pressure vessels with wall temperatures from-196°C to 400°C.
Components for Chemical plants (incl. LNG, FGD, Urea, LDPE, etc.) | Components for Recycling Industry |
Comps. for Food processing and Animal Feed | CPI (incl. LNG, Urea) |
Distributors for Component Applications | Distributors or producers of standard parts without knowledge of final applications |
Fine Blanking, Stamping, Blanking | Flowlines & Connectors |
Forging Applications | General Components for Mechanical Engineering |
Gravity / Low Pressure Die-Casting | Heat Exchanger |
Other Oil and Gas + CPI comps. | Storage technology |
Tubular Products, Flanges, Fittings |
Material: 2.4610/ Alloy C-4 |
UNS: N06455 |
AISI: |
DIN EN: 17744 / 17752 |
VdTÜV Datasheet: VdTÜV-Sheet 424 |
Others: ASTM B574 NACE MR0175 / ISO 15156 |
C | Si | Mn | P | S | Cr | Mo | Ni | Co | Ti |
max | max | max | max | max | 14,50 to | 14.00 to | REM | max | max |
0,009 | 0,050 | 1,00 | 0,020 | 0,010 | 17,00 | 17,00 | REM | 2,00 | 0,70 |
All information on the properties and recommendations on the usability of the material and its forms of delivery are given after careful research and to the best of our knowledge. However, no guarantee can be assumed. In the case of an order, they always require a special written agreement.
Dr. Stefan Pretterhofer Divisional Director Oil & Gas / CPI Phone +49 2261 – 798630 Stefan.Pretterhofer@voestalpine.com |