|Thickness:||0.006", 0.008", 0.012", 0.015", 0.018", 0.020"|
Thickness tolerance is T2 based on the internationally recognized
Swedish Tolerance Tables for Precision Strip Steel.
|Width Range:||Various - from "wide" heat-treated, polished and inspected stock.|
Width tolerance +/- 0.005"
|Surface Finish:||Bright hardened and bright polished|
Ra < 6uin. Maximum surface roughness. Value is determined with profilometer set to a cut-off length of 0.01in.
The maximum depth of light scratches is 2um. Sporadic light surface defects of a maximum 4um will be tolerated as long as they are not surface discontinuities which would affect fatigue properties of the strip.
|Flatness:||0.002" PIW (0.2% of the nominal strip width)|
|Structure:||A matrix of fine tempered martensite with a uniform distribution|
of fine carbides. No decarburization is allowed.
|Edge Condition||Slit, deburred. Skived edges can be supplied for special valve applications.|
Chief Technical Officer
+43 7442 600 29501