High Speed Steel

For modern industrial production, in particular mass production, machining is one of the most important shaping and forming processes. Almost all tools employed for this purpose are made from high speed steels.

BÖHLER Grades UDDEHOLM Grades

BÖHLER Grades

Material	Description	Grades	Size Range	Additional Information
Material S390	Produced by Powder Metallurgy methods. Segregation free and homogeneous metal powders of highest purity and adequate granulation are processed to a homogenous and segregation free high speed steel of virtual isotropic properties in a diffusion process taking place at high pressure and temperature.	Patent	POA: Other sizes available on request.	Datasheet
Material S600	Tungsten-molybdenum high speed steel with excellent toughness and cutting properties.	EN 1.3343 AISI M2	Round: 3mm – 260mm Flat: 13 x 6mm – 100 × 50mm Square: 16mm – 40mm Other sizes available on request.	Datasheet
Material S705	Cobalt alloyed, tungsten-molybdenum high speed steel possessing high hardness, excellent cutting properties, high red hardness and good toughness.	EN 1.3243 AISI M41	Round: 3.7mm – 13.5mm Other sizes available on request.	Datasheet
Material S790	Produced by Powder Metallurgy methods with good red hardness compressive strength, wear resistance & toughness.	Patent	POA: Other sizes available on request.	Datasheet

UDDEHOLM Grades

Material	Description	Grade	Size Range	Additional Information
Material Vanadis 23	Vanadis 23 SuperClean³ is a high alloyed powder metallurgical high speed steel suitable for long run tooling in applications with high demands on mixed wear (abrasive/ adhesive) or where risk of plastic deformation of the working surface of the tooling is encountered.	EN 1.3344 AISI M3 Class 2	Round: 4.3mm – 120mm Flat: 108 x 12mm – 254 x 50mm Square: 20mm -40mm Other sizes available on request.	Datasheet
Material Vanadis 30	Vanadis 30 SuperClean³ is a cobalt high performance high speed steel. The cobalt addition has a positive influence on the hot wear resistance. Hot wear resistance and ductility are key properties in high speed steel cutting tools.	EN 1.3207 AISI T42	Round: 16mm -77mm Flat: 45 x 20mm – 300 x 220mm Other sizes available on request.	Datasheet
Material Vanadis 60	Vanadis 60 SuperClean³ is a premium high alloyed PM high speed steel with 10,5% cobalt. Vanadis 60 SuperClean³ is particularly suitable for cutting tools where highest demand on wear resistance and hot hardness prevails.	EN 1.3241	Round: 13.2mm – 91mm Flat: 150 x 120mm Other sizes available on request.	Datasheet

CONTACT US

If you require further information or would like to request a quote you can contact your nearest sales location by using the form below.

First Name*

Last Name*

Company Name*

Email*

Phone Number*

State*

Post Code*

Message*

I would like to receive occasional information, invitations and other relevant communication from voestalpine