DryTec® - because future matters

Lubricant free

Saves preparation and installation time

• Compared to thread connections with thread compound, where transport/storage compound has to be removed and installation compound has to be applied, connections with DryTec® are ready to install. Therefore, DryTec® stands for easier handling and cost savings by elimination of work steps.

Eliminates the risk of well contamination

• Excess thread compound could clog sand screens, valves, and perforating guns. It could cause wire line failures and completion fluids contamination. It causes damage to the near-well zone by clogging pores and reducing the inflow rate. DryTec® protects you from these problems.

Safe & environmentally friendly

Prevents you from troubles

• Compared to thread compounds, DryTec® means no pollution at the rig and in the well. It increases the safety of your staff and reduces the impact on the environment.

Protective design

Prevents you from unexpected costs

• Compared to thread compounds, DryTec® provides an additional corrosion protection during transport and storage. It eliminates failure potential caused by too much or insufficient lubricant application and improves make-up, even for multiple make-up, at the same time. In addition, this dry alternative decreases the danger of contamination of the connection on site (e.g. with sand).

Ready to install

Saves water

• DryTec® connections are ready to install. Compared to connections with thread compound, no water is needed to remove transport/storage compound. Therefore, DryTec® stands for easier preconditions for your running/installation work on site.