GFRP processing combines glass fibres with thermoset or thermoplastic resins using lay‑up, infusion, RTM (Resin Transfer Moulding), or pultrusion (pull-through composit process). With steel or composite tooling, it produces lightweight, corrosion‑resistant parts for automotive, marine, wind energy, and industrial applications.
Glass fibre reinforced plastic (GFRP) processing involves combining thermoset or thermoplastic resin systems with glass fibres to produce lightweight, high‑strength composite components. Common processes include hand lay‑up, spray‑up, vacuum infusion, resin transfer moulding (RTM), pultrusion, and compression molding. Glass fibres—typically E‑glass or S‑glass—are supplied as mats, woven fabrics, rovings, or preforms and are impregnated with polyester, vinyl ester, epoxy, or thermoplastic resins. Tooling requirements depend on the chosen process: open moulds made from gel‑coated composite structures are used for manual lay‑up, while closed moulds in aluminum or alloyed tool steel enable dimensional accuracy in RTM and compression moulding. Heating systems, vacuum equipment, and release agents ensure proper curing and surface quality. GFRP parts offer high stiffness‑to‑weight ratios, corrosion resistance, and design flexibility, making them widely used in automotive exterior panels, wind‑turbine blades, electrical housings, infrastructure reinforcements, sports equipment, and marine structures.
BÖHLER K390 MICROCLEAN is a high-alloyed, high-performance cold work tool steel manufactured using powder metallurgy. This material has the highest alloy content in the group of cold work tool steels with high vanadium content. The high alloy content gives this material outstanding wear resistance. At the same time, the powder metallurgical manufacturing process creates a uniform matrix with finely distributed primary carbides. Among other things, this leads to good material toughness. BÖHLER K390 MICROCLEAN is a problem solver for applications requiring extremely high wear resistance and compressive strength.
Read MoreBÖHLER K490 MICROCLEAN is a high-performance cold work tool steel with a balanced property profile, manufactured using powder metallurgy. This powder metallurgical tool steel offers an outstanding combination of high wear resistance, compressive strength, toughness and very good machinability. Thanks to the resulting flexibility, BÖHLER K490 MICROCLEAN is used in virtually all cold work applications, and in many cases this material is the first choice for newly developed tools. The commonly used hardening temperatures of BÖHLER K490 MICROCLEAN also enable shared heat treatment with popular cold work tool steels (1.2379, D2), making it very economical in terms of heat treatment.
Read MoreBÖHLER M310 ISOPLAST is a corrosion-resistant, martensitic chromium steel which, through electroslag remelting and optimization of the chemical composition, has a good homogeneity and a balanced hardness-toughness-corrosion resistance ratio.
Read MoreBÖHLER M340 ISOPLAST corresponds to a corrosion-resistant, martensitic chromium steel with improved wear resistance. This is ideal for the application area of glass fiber reinforced plastics. In addition, the BÖHLER M340 ISOPLAST is approved for food and beverage contact.
Read MoreBÖHLER M390 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has very high wear resistance and good corrosion resistance. In addition, BÖHLER M390 MICROCLEAN is approved for food and beverage contact.
Read MoreBÖHLER M398 MICROCLEAN is a corrosion-resistant, martensitic chromium steel produced by powder metallurgy. Due to its alloy design, this steel has good corrosion resistance and higher wear resistance compared to BÖHLER M390 MICROCLEAN.
Read MoreBÖHLER W302 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2344 (X40CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as very high hot hardness and a very good resistance against heat-checkings. The combination of these properties makes it a top performer in closed- and open-die forging as well as in high- and low-pressure die casting. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.
Read MoreBÖHLER W403 VMR is a vacuum remelted material which was developed as a problem solver for tools for where a standard solution is no longer sufficient. The steel can be assigned to the 5% chromium steels and has a very high purity due to the special manufacturing technology. In addition, the increased molybdenum content leads to improved thermal resistance as well as wear resistance, which makes BÖHLER W403 VMR an all-rounder that is often used for highly stressed dies in the die casting sector. In addition, Böhler W403 VMR has outstanding polishability. For this reason, the steel is also popular as a molding material for plastic injection molds.
Read MoreFields marked with * are mandatory.