Materials & Components for the Oil & Gas Industry
As a global leader in steelmaking for more than a century, voestalpine delivers the highest-quality materials—from mill-produced specialty metals to custom forgings and tube & pipe solutions—all backed by unmatched technical expertise and long-term reliability.
We specialize in nickel alloys, duplex and super duplex grades, ferritic and martensitic stainless steels, as well as austenitic steels, providing tailored material solutions for the most demanding applications.
Our customers benefit from the unique flexibility of mill-produced made-to-spec orders combined with rapid-response availability from our extensive local stock network. This ensures fast, dependable supply—no matter the project size or urgency.
With key end-user approvals, global distribution channels, and dedicated local support in every major oil and gas hub, voestalpine provides true one-stop-shopping for demanding applications.
| Market Grade | UNS | Böhler Grade | Villares Grade | Bar | Billet | Wire Rod | Sheets/Plates | AM Powder |
|---|---|---|---|---|---|---|---|---|
Alloy 718API | N07718 | L718API | VAT718 | ● | ● | ● | ● | ● |
Alloy 925 | N09925 | L925 | VRC925 | ● | ● | ● | ||
Alloy 400 | N04400 | VRC400 | ● | ● | ● | |||
Alloy 625 | N06625 | L625 | VRC625 | ● | ● | ● | ● | ● |
F51 Duplex | S31803/S32205 | A903 | N4462 | ● | ● | ● | ||
F53 Super Duplex | S32750 | A913 | VF53 | ● | ● | ● | ||
F55 Super Duplex | S32760 | A911 | N4501 | ● | ● | ● | ||
F61 Super Duplex | S32550 | A930 | N4507 | ● | ● | ● | ● | |
Nit 50 | S21800 | P511 | VXM19 | ● | ● | ● | ● | |
Nit 60 | S21800 | P513 | VXM218 | ● | ● | ● | ● | |
Ti Grade 2/5/7/12 | R50400/6400/2400/3400 | ● | ● | ● | ● |
For a more extensive look at our materials, click the categories below.
The most important alloying elements of such steels are Cr and Mo. A ferritic, body-centred cubic solid solution structure can be achieved through a special balance of the alloying elements. Cr, Mo and others act as strong ferrite-stabilising elements. The elements stabilising the austenite, such as Ni, Mn, C, N, are kept very low. The Cr content of ferritic stainless steels is usually between 12 and 28%. In the case of high-performance steels in particular, so-called superferrites, extremely low C and N contents are aimed for, which has a positive effect on the toughness characteristics. Ni is added in small quantities as a toughness-enhancing alloying element. Ferritic steels are highly ferromagnetic.
Corrosion resistance is essentially determined by the Cr and Mo content. Resistance to intergranular corrosion is determined by the free Cr content, i.e. the Cr content in the solid solution that is not bound in the form of Cr carbides.
In general, ferritic stainless steels have a slightly higher strength and are significantly more resistant to stress corrosion cracking than austenitic Cr-Ni-(Mo) steels. Formability, on the other hand, is comparatively poorer, as is toughness, which also depends heavily on the cross-section. Ferritic stainless steels also show a pronounced transition from ductile to brittle fracture behaviour with decreasing temperature.
Due to these limitations, their use is severely restricted to thin-walled products (sheets, strips, pipes) in all industrial sectors and in corrosive media, e.g. for household goods, chemical process technology, magnetic applications and many more.
Martensitic and semi-martensitic stainless steels are ferromagnetic and have a microstructure consisting mainly of a martensitic phase (carbon martensite), possibly with small amounts of secondary phases, mainly ferrite and carbides. Such steels are tempered to higher strengths by heat treatment, e.g. hardening and tempering. The Cr content is approx. 12 to 18%, with proportions of Mo and Ni. Depending on the C and N content and the proportion of ferrite, high strengths and good wear resistance can be achieved with these steels.
Martensitic and semi-martensitic stainless steels have lower toughness and a relatively high transition temperature, are difficult to weld and generally require subsequent heat treatment, which means that their use is usually limited to non-welded parts. In order to achieve a martensitic or semi-martensitic microstructure, the Cr content tends to be in the low range and some of the chromium is bound in carbide precipitates. As a result, the corrosion resistance is comparatively lower and is usually below that of standard austenitic steels. For this reason and also because of their limited toughness, martensitic stainless steels are used where strength and hardness are primarily required, e.g. for cutting tools, general mechanical engineering, shafts and fasteners.
Related Products
BÖHLER N695 is a Chromium alloyed stainless steel with high hardness, wear resistance and good corrosion resistance in the hardened and tempered condition. this grade is typically used for parts requiring hardness up to 58 HRC and resistance to wear, corrosion, and oxidation, e.g. balls, rollers, needles and rings for corrosion resistant bearings, but usage is not limited to such applications.
Read More








We supply high-performance metals and engineered components for offshore applications, designed to meet the highest standards Whether for platforms, FPSOs, or production strings, our solutions are backed by global stock availability, efficient support for logistics and import, and a supply chain built for predictability and on-time delivery.

In the demanding environment of onshore oil and gas operations, the use of high-quality metals is essential to ensure reliability, safety, and performance across all stages of production and infrastructure. From processing and storage to pipeline systems, precision-engineered metal components are the backbone of critical equipment.
From reverse engineering and alloy development to printing, finishing, and design support, we deliver reliable, production-ready AM solutions for oil & gas, CPI, and renewable applications.
Learn more about our additive manufacturing services for the oil & gas industry here:
Backed by extensive processing capabilities and trusted partners, we deliver full end-to-end solutions from raw materials to precision-machined components. Our services include cutting, deep hole drilling, turning, honing, heat treatment, straightening, testing, and more. Advanced equipment allows us to achieve superior tole-rances, fine finishes, and excellent concentricity across diverse materials. Leveraging deep expertise in complex alloys and precision machining, we deliver trusted, cost-effective solutions that strengthen our customers’ operations and drive project success.
Have a more in depth look at our top services below!

With a globally integrated production and distribution network, voestalpine ensures reliable access to high-performance steels for oil & gas applications—wherever operations take place. Our customers benefit from a seamless combination of mill-origin supply and strategically located service centers, enabling both made-to-spec solutions and rapid local availability. Supported by dedicated experts in key industry hubs, we provide not only materials but also tailored services, technical guidance, and efficient logistics. This close proximity to our customers ensures short lead times, consistent quality, and dependable performance across all regions—delivering confidence at every stage of the supply chain.
voestalpine embodies uncompromising quality, shaped by more than a century of steelmaking expertise and driven by materials science that lives in our DNA. Our relentless focus on consistency and reliability ensures every product meets the highest performance standards. Trusted by the world’s top performers and approved by all major OEMs, we deliver metals engineered for precision, endurance, and confidence—setting the benchmark for excellence across the most demanding industries.
Fields marked with * are mandatory.