Standard Parts (Moulds, Plates, Pins, Punches)

BÖHLER K105 is a 12% ledeburitic chromium steel and corresponds to material number 1.2601 (X165CrMoV12). This commonly used tool steel is highly resistant to abrasive wear. Compared to modern cold work tool steels, BÖHLER K105 has the advantage of simple heat treatment with lower hardening temperatures and single tempering. The improved tempering resistance of BÖHLER K105 compared to the conventional tool steel 1.2080 also enables nitriding treatment of tools.

BÖHLER K110 is a 12% ledeburitic chromium steel and corresponds to material number 1.2379 (X153CrMoV12, D2). This tool steel combines the advantages of conventional 12% ledeburitic chromium steels with those of advanced tool steels. In the group of 12% ledeburitic chromium steels, BÖHLER K110 offers the best combination of wear resistance, compressive strength and toughness, for which reason it is used in virtually all cold work applications. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings. This also makes BÖHLER K110 suitable for complex tools requiring a high degree of dimensional stability and shape stability.

BÖHLER K600 corresponds to the material 1.2767 (45NiCrMo16). With its high nickel content, this material offers a very good combination of through hardenability and toughness. This results in a high resistance to impact and shock loads. BÖHLER K600 is used for a wide range of tools where high toughness is required. The material is used for forming and bending tools, cold shear blades for thick materials and for reinforcement rings. Due to its good polishability, BÖHLER K600 is also used for embossing tools, plastic molds and mold inserts for injection molding.

BÖHLER K720 is corresponds to the material 1.2842 (90MNCRV8, ~O2). This material is suitable for simple heat treatment with low hardening temperatures and single tempering. However, this characteristic tempering behaviour limits the use of advanced coatings. The material has a good hardening response, but only moderate through hardenability. BÖHLER K720 is used for punching and cutting tools, plastic molds, thread cutting tools and machine knives in the wood, paper and recycling industries.

BÖHLER K888 MATRIX – This MATRIX steel offers an excellent combination of high toughness and high compressive strength. MATRIX materials have high toughness, which is a critical factor in many applications. However, the hardness achievable with commonly used MATRIX steels often limits the potential applications. BÖHLER K888 MATRIX breaks through this barrier and offers the best of both worlds of matrix steels and high alloy tool steels. BÖHLER K888 MATRIX is a unique problem solver in situations where high compressive strength and toughness are required. Its advantageous tempering behavior with a pronounced secondary hardness maximum also enables the use of advanced coatings.

BÖHLER M238 is a prehardened, non-corrosion-resistant plastic mould steel with good machinability. The addition of Ni guarantees uniform strength across the entire cross-section, even with large dimensions (up to 600 mm).

BÖHLER M303 ISOPLAST corresponds to a remelted BÖHLER M303 . The variation in the production route enables greater toughness and polishability thanks to higher purity and improved homogeneity. Also available as product variant BÖHLER M303HH ISOPLAST (high-hard variant).

BÖHLER M310 ISOPLAST is a corrosion-resistant, martensitic chromium steel which, through electroslag remelting and optimization of the chemical composition, has a good homogeneity and a balanced hardness-toughness-corrosion resistance ratio.

BÖHLER M333 ISOPLAST is a corrosion-resistant, martensitic plastic mold steel with excellent polishability and toughness for products with highest surface requirements. BÖHLER M333 ISOPLAST is also approved for food and beverage contact.

BÖHLER M340 ISOPLAST corresponds to a corrosion-resistant, martensitic chromium steel with improved wear resistance. This is ideal for the application area of glass fiber reinforced plastics. In addition, the BÖHLER M340 ISOPLAST is approved for food and beverage contact.

BÖHLER S600 – “The high-speed steel” Ideal for mills, twist drills, and taps, broaches, cold-work tools. BÖHLER S600 is the most commonly used high-speed steel and is the starting material for our customers who deal with high-speed steel.

BÖHLER W300 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2343 (X37CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as good hot hardness and very good resistance against heat-checkings. The combination of these properties makes it a top performer in high- and low-pressure die casting as well as in closed-die and open-die forging. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.

BÖHLER W302 ISOBLOC is a 5% chromium steel and corresponds to material number 1.2344 (X40CrMoV5-1). Produced via the electroslag remelting process (ESR), this tool steel has very high hot toughness as well as very high hot hardness and a very good resistance against heat-checkings. The combination of these properties makes it a top performer in closed- and open-die forging as well as in high- and low-pressure die casting. In addition, this material has very good polishability and is therefore also often used as a molding material for plastic injection molds.

BÖHLER W360 ISOBLOC is a material produced by the electroslag remelting process (ESR), which has been specially adapted for use at high tool hardnesses in the range of 51-57 HRC. Although the steel can be classified as a 5% chromium steel, the increased carbon and molybdenum content coupled with state-of-the-art manufacturing technology ensures that BÖHLER W360 ISOBLOC still shows a very good toughness and an exceptionally good thermal resistance, even at high hardness levels. These properties make the steel the perfect choice for smaller components in the die casting sector (e.g., mold inserts, cores, core pins, ejector pins, etc.). The material also is frequently the preferred choice for closed-die and open-die forging tools due to its high wear resistance. Because of this excellent wear resistance and the high toughness, BÖHLER W360 ISOBLOC is also frequently used for cold work applications and as a molding material for plastic injection molds. The Steel also is available as powder material for metal-3D-printing under the brand name BÖHLER W360 AMPO.

Uddeholm Caldie is a medium alloyed tool steel suitable for short and medium run tooling in applications where a combination of very high chipping resistance and compressive strength is required. The property profile makes Uddeholm Caldie a robust cold work tool steel for heavy duty blanking and forming of AHSS (Advanced high strength steel). Benefits Uddeholm Caldie is very useful for severe cold work applications where there are high demands on both chipping resistance and compressive strength Uddeholm Caldie can easily be surface treated for improved wear resistance Very good dimensional stability Reduced maintenance and downtime costs combined with increased productivity due to the reduced likelihood of premature failures. Reduced maintenance and downtime costs combined with increased productivity due to simplified maintenance procedures Good weldability and the availability of welding electrodes with the same chemical composition as Uddeholm Caldie Good flame-, induction- and laser hardenability

Uddeholm Elmax Super Clean is a powder metallurgically produced mould steel characterized by a combination of very good wear resistance, corrosion resistance and dimensional stability. Recommended for long production runs of smaller and complicated shapes and/or reinforced plastics. High wear resistance is normally connected to low corrosion resistance and vice versa. In Uddeholm Elmax SuperClean it has however been able to achieve this unique combination of properties by a powder-metallurgy-based production. Uddeholm Elmax SuperClean offers a possibility to make long-life, low maintenance moulds for the best overall moulding economy. Benefits Less wear because of god wear resistance Less indentations because of compressive strength Less maintenance because of corrosion resistance Less adjustments after heat treatment because of good dimensional stability Standard specification AFNOR Z170 CVD 17.3

Uddeholm Mirrax 40 is a prehardened remelted stainless tool steel, supplied at 40 HRC. Uddeholm Mirrax 40 is produced using the electroslag remelting (ESR) process – an additional step in the steelmaking process that ensures very clean steel. Consequently, Uddeholm Mirrax 40 is capable of being polished to a very high surface finish. In addition, the combination of high hardness with high toughness results in a mould with good resistance to indentations and minimize the risk of unexpected failures, leading to a safer mould and a prolonged tool life. Benefits Lower production costs Fast tool making Excellent surface finish possible Less maintenance work Safe production

Uddeholm Mirrax ESR is a through hardening corrosion resistant steel with very good polishability. Mainly intended for medium to large cross sections. It has a unique combination of toughness, corrosion resistance and through hardening properties. Benefits Low mould maintenance costs: The surface of cavity impressions retain their original finish over extended running periods. Moulds stored or operated in humid conditions require less protection. Low production costs: Water cooling channels are less affected by corrosion Heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times. Safe mould use because of good toughness also in big dimensions

Uddeholm Sleipner is a general purpose steel for cold work tooling. It has a mixed-abrasive wear profile and a good resistance to chipping. Furthermore a high hardness (>60 HRC) can be obtained after high temperature tempering. This means that surface treatments such as nitriding or PVD can be made on a high strength substrate. Also, it means that complicated shapes with hardness levels >60 HRC can be wire EDM’d from blocks with relatively thick cross-sections with a much reduced risk of cracking. Uddeholm Sleipner is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required. Benefits Very broad property profile Very good steel for all types of surface treatments Extremely versatile conventional tool steel for medium run cold work tooling Suitable upgrade where added chipping or wear resistance is needed over traditional AISI A2 or AISI D2 In East/South East Asian countries served by ASSAB, Uddeholm Sleipner is sold as ASSAB 88.

Uddeholm Stavax ESR is a premium stainless mould steel for small and medium inserts and cores. Uddeholm Stavax ESR combines corrosion and wear resistance with excellent polishability, good machinability and stability in hardening. Mould maintenance requirement is reduced by assuring that core and cavity surfaces retain their original finish over extended operating periods. When compared with non stainless mould steel, Uddeholm Stavax ESR offers lower production costs by maintaining rust free cooling channels, assuring consistent cooling and cycle time. This classic stainless tool steel is the right choice when rust in production is unacceptable and where requirements for good hygiene are high, as within the medical industry, optical industry and for other high quality transparent parts. Uddeholm Stavax ESR is a part of the Uddeholm Stainless Concept. Benefits Low mould maintenance because of corrosion resistance: Surfaces retain their original finish Less production during storing and operation in humid condition Lower production costs: Since water-cooling channels are unaffected by corrosion Heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times. Long life mould Standard specification W.nr 1.2083 / AISI 420 / AFNOR Z40 CV 14 (RSL)

Uddeholm Sverker 3 is a high alloyed tool steel suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Uddeholm Sverker 3 contains large carbides which are advantageous for abrasive wear resistance but which reduce the chipping resistance. Benefits Uddeholm Sverker 3 is a tool steel offering good tooling economy for medium run tooling when the cost of the tool is a significant portion of the total cost for producing the required number of parts Uddeholm Sverker 3 is very useful in applications with very high demands on abrasive wear but where demands on chipping resistance are small, e.g. for the blanking of electrical sheets containing hard silicon oxide particles, slitting of paper and foils Uddeholm Sverker 3 is a tool steel with good tooling economy for medium to long run tooling in special applications where a very high abrasive wear resistance is needed The coarse carbides make Uddeholm Sverker 3 particularly suitable for applications where the wear is created by coarse abrasive particles as in brick pressing, tile pressing, and in the compacting of ceramic materials in general In East/South East Asian countries served by Assab, Uddeholm Sverker 3 is sold as AS XW-5. Standard specification W.nr 1.2436 / AISI D6 / AFNOR Z200 CW 13

Uddeholm Unimax is a high hardness hot work tool steel which provides great wear resistance even over extended time at elevated temperatures. It performs very well in precision forging and hot stamping. Benefits Improved durability and wear resistance in moulding processes that wear hard on the mould like, long run production, moulding of reinforced plastics and compression moulding Longer tool life and a smoother production run with fewer disturbances for maintenance due to the high ductility Problem solver in severe cold work applications where high chipping resistance is required The high hardness and toughness together with the good dimension stability makes Unimax suitable as a substrate steel for surface coating when needed The very good hardenability and the unique properties profile of Unimax make it especially suitable for larger moulds. Unimax is therefore supplied in larger dimensions

Uddeholm Vanadis 23 SuperClean is a high alloyed powder metallurgical high speed steel with a good abrasive wear resistance in combination with a high compressive strength. It is suitable for demanding cold work applications like blanking of harder materials such as carbon steel or cold rolled strip steel and for cutting tools. Benefits Uddeholm Vanadis 23 SuperClean is a powder metallurgical tool steel offering an excellent combination of wear resistance and toughness. The machinability and grindability are superior to conventional high speed steel and so is the dimensional stability after heat treatment. The superclean powder metallurgy process ensures that the cleanliness is on a high level with a low amount of non-metallic inclusions. In east/south east asian countries served by Assab, Uddeholm Vanadis 23 SuperClean is sold as Assab pm 23. Standard specification W.nr 1.3395 / AISI D2 / AFNOR Z130 WDCV 6.5.4.3

Uddeholm Vanadis 4 Extra SuperClean is the most versatile pm tool steel on the market today, combining high wear resistance with very good ductility and resistance to chipping of edges. Excellent machinability in both soft and hard condition ensures advantages in both tool making and tool maintenance. Uddeholm Vanadis 4 Extra SuperClean is also available as powder for processing by electron beam melting technology (EBM). This powder has the same chemical composition as the PM material. Benefits Reliable production with low risk of edge chipping Best combination of high hardness, wear resistance and chipping resistance High compressive strength Best stock standard program of all PM grades Standard specification AISI D2 / AFNOR de type Z136 CDV 5.4

Uddeholm Vanadis 8 SuperClean sets a new standard for Powder Metallurgical Tool Steel. The technological advancements makes this cold work tool steel superior to its predecessors. The unprecedented combination of extremely high wear and chipping resistance paired with improved machining properties raises production rates and reduces costs. Benefits Lower price per produced part Longer tool life Predictable Production Standard specification AISI D2 / AFNOR de type Z230VCD8.5.4