voestalpine Böhler Welding

Stick electrodes for high strength steel

19. ápr 2018

The best for the best. Böhler Welding Stick electrodes for high strength steel!

The most commonly used electrodes are presented here:

 

Product

Characteristics and typical fields of application

Datasheet

BÖHLER FOX EV 65 

Basic electrode with high ductility and crack resistance, for high- strength fine- grained steels. Ductile down to -60°C. Resistant to ageing. Easy to handle in all positions, except vertical- down. Very low hydrogen content (acc. to AWS condition HD <4 ml/100 g weld metal). BÖHLER FOX EV 65 can be used in sour gas applications (HIC-Test acc. NACE TM-02-84). Test values for SSC-test are available too.

Link

BÖHLER FOX EV 70 

Basic Mo-Ni alloyed electrode exhibiting high ductility and crack resistant for applications on high-strength fine-grained steels. Suitable for service temperatures between –60 °C and +350 °C. Metal recovery approx. 115 %. Easy to handle in all positions except vertical-down. Very low hydrogen content (acc. AWS condition HD < 4 ml/100 g weld metal). Preheat and interpass temperatures, as well as post weld heat treatment as required by the base metal.

Link

BÖHLER FOX EV 75 

Mn-Mo-Ni -alloyed basic electrode with high ductility and crack resistance for high-strength, quenched and tempered fine-grained constructional steels. Suitable for service temperatures at –60 °C to +400 °C. Weld metal recovery approx. 120 %. Easy weld ability in all positions except vertical-down. Preheat, interpass temperature and post weld heat treatment as required by the base metal. Very low hydrogen content (acc. AWS condition HD < 4 ml/100 g weld metal).

Link

BÖHLER FOX EV 85

Basic Mn-Ni-Mo-alloyed electrode with high ductility and crack resistant for high-strength finegrained constructional steels. Low-temperature ductility at –60 °C and resistant to ageing. Easy weld ability in all positions except vertical-down. Very low hydrogen content (acc. AWS condition HD < 4 ml/100 g).

Link

 

Phoenix SH Ni 2 K 90

Basic covered NiMo alloyed electrode. For cryogenic, high strength, fine grained structural steels. H2-content ≤ 5ml/100g (HD); not sensitive to cold cracking. For use in structural steel and tank construction; naval shipbuilding. 

Link

 

Phoenix SH Ni 2 K 130

Basic covered NiCrMo alloyed electrode. Low H2-content ≤5 ml/100 g (HD) in the weld metal. For high strength fine grained structural steels. Suitable for bridge building, steel and crane construction; the weld metal is insensitive to cold cracking.

Link

 

You will find all needed information in our product search!