voestalpine Böhler Welding
voestalpine Böhler Welding

Lista de publicaciones

El continuo desarrollo de la base de productos es el requisito fundamental para un éxito internacional. Tal desarrollo se lleva a cabo mediante los proyectos de investigación propios o mediante colaboradores.

El una importante prioridad integrar el conocimiento tecnológico adquirido recientemente en cooperación con nuestros colaboradores en el desarrollo de productos innovadores para nuestros clientes. Participamos activamente en conferencias internacionales y presentamos nuestros resultados a la comunidad de soldadura internacional. 

  • The alform® welding system - The world's first system for high-strength welded structures, M. Fiedler, R.Rauch, R. Schnitzer, W. Ernst, G. Simader, J. Wagner, 68th IIW Annual Assembly, Finland, June 2015
  • Experimental and numerical investigations on the fracture behavior of an API 5L X100M base material and weldings, A. Horn, R. Tichy, H. P. Gänser, R. Schnitzer, R. Egger, A. Hammer, R. Ebner, 10th Pipeline Technology Conference, Germany, June 2015
  • Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds, W. Vanovsek, C. Bernhard, M. Fiedler, R. Schnitzer, IIW-Dok. II-C-435-11
  • Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds, W. Vanovsek, C. Bernhard, M. Fiedler, G.Posch, PaperWelding in the World, DOI 10.1007/s40194-012-0008-0
  • Investigation of the hardness-toughness-relationship of a welded joint after different heat-treatment cycles, T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer, IIW-Dok  II-1777-11
  • Welding procedure for high strength welds and their microstructural evolution during solidification and cooling, R. Schnitzer, T. Schlagradl, R. Schneider, G. Posch, W. Vanovsek, S. Schider, C. Bernhard, H. Leitner, R. Rauch, M. Fiedler, M. Stoschka, IIW-Dok.II-C-436-11
  • Effect of high-strength filler metals on fatigue, M. Stoschka, M. Leitner, T. Fössl and G. Posch, IIW-Dok. II-1742-10
  • New developed filler metals for welding of high strength steels, R. Schnitzer, M. Leitner, M. Fiedler, M. Stoschka, Proceeding CESOL, Spanien, Oktober 2011
  • New developed filler metals for welding of high strength steels, R. Schnitzer, G. Posch, M. Fiedler, C. Strauß, R. Rauch, T. Fössl, B. Böck, Proceeding  IIW-Jahrestagung, Indien, Juli 2010
  • Nuovi materiali d’apporto sviluppati per i nuovi acciai ad alto snervamento della  VOESTALPINE AG, R. Schnitzer, G. Posch, M. Fiedler,C. Strauß, R. Rauch, T. Fössl, B. Böck, P. Bonalumi , ProceedingGNS6, Italien, May 2011
  • Contribution to the capability of filler metals to influence fatigue of butt joints, M. Stoschka; M. Leitner; T. Fössl, G. Posch, IIW-Dok. II - 1775-11
  • Contribution to the capability of filler metals to influence pulsating fatigue life, M. Stoschka, T. Fössl, M. Leitner, G. Posch, IIW-Dok.II-1742-10
  • Determination of Mo-Rich Laves-Phase in Weld Metals of a Creep-Resistant 9% Cr-Steel Using Light Optical Microscopy, H. Pahr, H. Rojacz, S. Baumgartner; Metallography, Microstructure, and Analysis, Volume 6, Issue 4, pp 352-359, August 2017
  • Effect of annealing time on the mechanical properties of P91 flux cored wire weld metal, S. Baumgartner, A. Holy, D. Schwarz, M. Schuler, R. Schnitzer, 68th IIW Annual Assembly, Finland, June 2015
  • Influence of Nickel on the Properties of P91 Flux Cored Wire Weld Metal, S. Baumgartner, A. Holy, M. Schuler, R. Schnitzer, N. Enzinger, FiMPART' 15 - Conference on Frontiers in Materials Processing, Applications, Research & Technology, India, June 2015
  • Werkstoffe im Druckbehälter- und Apparatebau, G. Metting, DVS Fachbuch, Kapitel 3, February 2015
  • Flux Cored Arc Welding of Creep Resistant Cast Components, S. Baumgartner, R. Schnitzer, E. Schmitdne-Kelity, R. Hanus, C. Lochbichler, IIW Conference, Seoul, July 2014
  • Experience of welding martensitic steels like T/P91, T/P92 and VM12-SHC for thermal power plants, K.-G. Tak, H. Heuser, IIW Conference, Seoul, July 2014
  • Dissimilar Welding of the Creep Resistant Steels CB2 and P92 with Flux Cored Wires, S. Baumgartner,M. Schuler, A. Holy, R. Schnitzer, N. Enzinger, IIW Doc. IX-C-1039-14
  • Influence of Chemical Composition and PWHT on Mechanical Properties of P92 Flux Cored Wire Weld Metal, S. Baumgartner,H. Pahr, R. Schnitzer, M. Schuler, N. Enzinger, EPRI Conference: "Welding and Repair Technology for Power Plants", Naples, Florida, June 2014
  • Use and application of low carbon synthetic CrMo Electrodes, R. Fuchs, H. Heuser, J. Stoll, K.-G. Tak, EPRI Conference: "Welding and Repair Technology for Power Plants", Naples, Florida, June 2014
  • Properties of a creep resistant 9Cr-1,5Mo-1Co cast steel joint welded with a matching flux cored wire, S. Baumgartner, A. Holy, M. Schuler, A. Sarić, R. Schnitzer, N. Enzinger, IIW Doc IX-C-1028-13
  • Creep investigation of CB2 joints using similar rutile CB2-flux cored wire, M. Schuler, S. Baumgartner, R. Schnitzer, N. Enzinger, IIW Doc. II-1850-13
  • Warmfeste Fülldrähte für Einsatztemperaturen bis 625°C, S. Baumgartner,  In:  join-ex 2012. Internationaler Fachkongress der Schweiß- und Verbindungstechnik, Wien 2012
  • Welding advanced martensitic creep resistant steels with Boron containing Filler Metal, S. Baumgartner, G. Posch, P. Mayr:,Welding in the World, Vol. 56, No. 7/8 2012, pp. 2-9
  • Welding of the austenitic alloys Super 304H, 347H FG and 310N, H. Heuser, R. Fuchs; EPRI Conference, Columbus, Ohio, USA, March 2009
  • Welding of dissimilar materials, H. Heuser, R. Fuchs, B. Hahn; EPRI Conference, Fort Myers, Florida, USA, April 2009
  • Experience with welding of P92 and VM12-SHC, H. Heuser, R. Fuchs, B. Hahn; EPRI Conference, Fort Myers, Florida, USA, April 2009
  • Further Development of the Ac1 temperature of Grade 91 and Grade 92 steels, and the effect on the temperature for post weld heat treatment, H. Heuser, D. Kreuzer-Zagar, R. Fuchs; EPRI Conference, Fort Myers, Florida, USA, April 2009
  • Welding CrMo steels for Power Generation and Petrochemical Applications – Past, Present and Future, J. Hilkes, V. Groß; IIW Singapore 2009
  • Welding of new pipe steels in modern high efficiency power stations with high steam parameter, H. Heuser, V. Groß, W. Bendick, B. Hahn; Delhi Conference, India, February 2008
  • Neue Stähle für moderne Hochleistungskraftwerke, H. Heuser, C. Jochum, B. Hahn, W. Bendick; 36. Sondertagung im Anlagen- und Behälterbau, GSI SLV München, Februar 2008
  • Methods of measuring the Ac1b temperature of Grade 91 steel, and the effect on the temperature for post weld heat treatment, H. Heuser, D. Kreuzer-Zagar, R. Fuchs; 8th International EPRI Conference, Fort Myers, USA, June 2008
  • Welding of new pipe steels in modern high efficiency power stations with high  steam parameter, H. Heuser, C. Jochum, W. Bendick, B. Hahn; 61st  Annual Conference of the Institute of Welding, Graz, Austria, July 2008
  • Schweißtechnische Herausforderung bei der Verarbeitung von CrMo(V)-Stählen für Hydrocracker, H. Heuser, C. Jochum, V. Groß; 35. Sondertagung im Anlagen- und Behälterbau, GSI SLV München, Februar 2007
  • Welding of liquefied natural gas (LNG) and liquefied biogas (LBG) applications, J. Ingemansson, Application Note, April 2013
  • Nickel base overlay - Applications and Comparison of different welding processes, T. Assion, J. Tuchfeld, Proceeding CESOL, 2012
  • Optimisation of  the welding behaviour of filler metal alloy 690 with special regards to hot crack sensibility, J. Tuchtfeld, J. Grübbel, T. Assion, Proceedings of the IIW International Conference on Global Trends in Joining, Cutting and Surfacing Technology, July 2011
  • Neue Generation von Nickel-Basis-Fülldrähten, J. Heinemann, Schweißtechnik Soudure, 07(2010), S. 22-25, Schweizerischer Verein für Schweißtechnik, Basel, December 2010
  • Auswahl von Schweißzusätzen für den Korrosionschutz in MVA´s, H. Heuser, TU Freiberg/Giswil Schweiz, Oktober/November 2005
  • Effect on microstructure and properties of super duplex stainless steel welds when using backing gas containing nitrogen and hydrogen, E.M. Westin, M.M. Johansson, L.-Å. Bylund, R.F.A. Pettersson, Welding in the World, Vol. 58, pp. 347-354, May 2014
  • Optimisation of welding procedures for duplex and superduplex stainless steels, E.M. Westin, Australasian Welding Journal - Welding Research Supplement, VOLUME 59, FIRST QUARTER – 2014, pp. 47 – 60, April 2014
  • Element distribution in lean duplex stainless steel welds, E.M. Westin, S. Hertzman, Welding in the World, Vol. 58, pp. 143-160, February 2014
  • Effect of nitrogen-containing shielding and backing gas on the pitting corrosion resistance of welded lean duplex stainless steel LDX 2101® (EN 1.4162, UNS S32101), E.M. Westin, M.M. Johansson, R.F.A. Pettersson, Welding in the World, Vol. 57, pp. 467-476, July 2013
  • Welding stainless steels – Experience with water heaters, E.M. Westin, D. Serrander,  Welding in the World 56 (2012) 5/6 14pp.
  • Localized corrosion resistance of welded austenitic and lean duplex stainless steels, M.M. Johansson, E.M. Westin, J. Oliver, R.F.A. Pettersson, Welding in the World 55 (2011) 9/10 19-27.
  • Single-pass laser GMA hybrid welding of 13.5 mm thick duplex stainless steel, E.M. Westin, K. Stelling, A. Gumenyuk, Welding in the World, 55 (2011) 1/2 39-49.
  • Pitting corrosion resistance of GTA welded lean duplex stainless steel, E.M. Westin, Welding in the World 54 (2010) 11/12 R308-321.
  • Effect of laser and laser hybrid welding on the corrosion performance of a lean duplex stainless steel, E.M. Westin, A. Fellman, Journal of Laser Applications, 22 (2010) 4 150-158.
  • Fracture toughness of welded commercial duplex stainless steel, H. Sieurin, E.M. Westin, M. Liljas, R. Sandström, Welding in the World, 53 (2009) R24-R33.
  • Weld oxide formation on lean duplex stainless steel, E.M. Westin, C.-O.A. Olsson, S. Hertzman, Corrosion Science 50 (2008) 2620-2634.
  • Weldability aspects of a newly developed duplex stainless steel LDX 2101, E.M. Westin, B. Brolund, S. Hertzman, Steel Research International 79 (2008) 473-481.
  • Effect of post-weld straining on temper rolled austenitic stainless steel welds, H. Engström, E.M. Westin, Welding in the World 52 (2008) 1/2 87-99
  • Fracture toughness of the lean duplex stainless steel LDX 2101, H. Sieurin, R. Sandström, E.M. Westin, Metallurgical and Materials Transactions A, 37A (2006) 2975-2982.
  • Welding the lean duplex steel, LDX  2101® for pressure vessel applications down to -40°C design temperature, using a positional flux cored wire, F. Hägg, H. Åström
  • Welding of the new duplex grade LDX 2404® with 2209-type filler, L. Å. Bylund,  M. Johansson, R. Pettersson
  • Schweißen hochkorrosionsbeständiger Stähle, H. Heuser; Dechema Frankfurt, Januar 2005
  • Anforderungen an Schweißzusatzwerkstoffe hinsichtlich der Korrosionssicherheit, H. Heuser; Dechema Frankfurt, März 2004
  • Value of different hot cracking tests for the manufacture of filler metals, H. Heuser; BAM Berlin, März 2004
  • Strip Cladding of special stainless steels and Ni-alloys, M. Decherf, C.S. Laszlo
  • High quality electroslag strip cladding of thin single layers for 625 and 347 alloys, M. Decherf, R. Demuzere, F. Ciccomascolo
  • Reparaturlösungen für Werkzeugstähle, T. Assion, J. Tuchtfeld
  • Wear protection by hardfacing, J. Tuchtfeld, T. Assion, I. Chiguer
  • Applications of MIG-brazing and requirements on the filler metals – Gentle on the materials and flexible, Ebbinghaus, M., Welding and Cutting 10 (2011) [4] 232-235 Reports, DVS-Media GmbH, Düsseldorf, 2011
  • Erfolgreich Löten, Jülly, O., Schweißtechnik Soudure, 02(2011), S. 23-25, Schweizerischer Verein für Schweißtechnik, Basel, 2011
  • Lötanwendungen in der Kälte-Klimatechnik, Jülly, O. Der Praktiker 12 (2010)/62 474-477, DVS-Media GmbH, Düsseldorf, 2010
  • Vielfältige Anwendungen des MIG-Lötens und Anforderungen an die Zusatzwerkstoffe, Ebbinghaus, M., Schweißtechnik Soudure, 07(2010), S. 26-28, Schweizerischer Verein für Schweißtechnik, Basel, 2010
  • Anwendungen des MIG-Lötens und Anforderungen an die Zusatzwerkstoffe, Ebbinghaus, M., Der Praktiker, 11(2010), S. 436-439, DVS-Media GmbH, Düsseldorf, 2010
  • Bleifreie Weichlote im Karosseriebau, Jülly, O., Veröffentlichung der Fontargen GmbH: FE-Aktuell, Eisenberg 15/6/2005
  • Lichtbogenlöten an PKW-Abgasanlagen, Ebbinghaus, M., Veröffentlichung der Fontargen GmbH: FE- Aktuell, Eisenberg, 2004
  • Lichtbogenlöten an rotationssymmetrischen Teilen für die Magnet-Technik, Ebbinghaus, M., Veröffentlichung der Fontargen GmbH: FE- Aktuell, Eisenberg, 2004
  • Hartlöten von Aluminium, Resch, M., Veröffentlichung der Fontargen GmbH: FE- Aktuell, Eisenberg, 2003
  • Lichtbogen-Löten von Stahlbauteilen mit Kupfer-Basis-Zusatzwerkstoffen, Ebbinghaus, M., 5. Internationales Kolloquium Hart- und Hochtemperaturlöten und Diffusionsschweißen, DVS-Verlag, Aachen, 1998
  • MIG-Löten verzinkter Stähle – besonders für den Automobil-Leichtbau, Ebbinghaus, M., Veröffentlichung der Fontargen GmbH: FE- Aktuell, Eisenberg, 1998
  • Lichtbogen-Löten von Stahlbauteilen mit Kupfer-Basis-Zusatzwerkstoffen, Ebbinghaus, M., Prinz, H.-D.,DVS-Berichte Band 192, S. 146/49. DVS-Verlag, Düsseldorf 1998
  • Lichtbogen-Löten von Stahlbauteilen mit Kupfer-Basis-Zusatzwerkstoffen, Ebbinghaus, M., Prinz, H.-D., Fontargen-Mitteilung, Dok.-Nr. 2.35, 23.12.98
  • MIG brazing of galvanized sheet steels and profiles, Ebbinghaus, M., Hackl, H., Lahnsteiner, R., San Francisco, 1997, p. 121-137, IIW doc. XII-1501-97