奥钢联伯乐焊接奥地利有限公司的网站使用 cookies， 能使我们提供最佳服务。您继续浏览本网站时，便对cookie的使用表示同意。
Electric arc welding with stick electrodes is one of the oldest and most versatile welding processes. And it is also considered as one of the simplest and safest methods. It is used to weld almost all types of metals. Stick electrodes are even used for underwater welding.
For electric arc welding with stick electrodes, an electric arc is generated between the stick electrode and the base material. In shielded metal arc welding (SMAW) or manual metal arc welding (MMA) using coated stick electrodes, the coating forms a protective gas shield and a slag, thereby protecting the transferred metal droplets and the weld metal against contact with atmospheric oxygen.
Further functions of the coating are de-oxidation of the weld metal, increasing the metal recovery, compensating for burn-off and ensuring good wetting behaviour. In practical use there are three significant types of coating: rutile, basic and cellulosic and mixtures of these.
Find here more information about the different coating types.More information
Find here all products of stick electrodes for different type of steel.More information
Find here more information about the DRY SYSTEM vacuum packaging.More information
Find here more information about the classification of stick electrodes.More information
Find here useful information about applications of stick electrodes.More information
According to the European Norm DIN EN ISO 2560, there are a total of eight different types of coated stick electrodes for arc welding of unalloyed steels and fine-grained steel. The four main types are named after their main components:
- C (Cellulose) cellulose electrodes
- A (Acid) acid electrodes*
- R (Rutile) rutile electrodes
- B (Basic) basic electrodes
These coating types are a very important differentiator for the unalloyed stick electrodes. Stick electrodes for high strength, creep resistant or high-alloyed steels according to the other EN standards are mostly coated with rutile or basic coating elements.
Cellulose-coated stick electrodes
Due to the high level of cellulose in the coating, they have excellent properties for out-of-position welding, but poor properties for horizontal welding. They are therefore mainly used for vertical-down welding on large pipes.
Rutile-coated stick electrodes
These electrodes are very popular due to their good welding properties. The welding arc is stable and calm and is easy to reignite, the seams are finely rippled, and most of the slag comes off by itself. Rutile-coated electrodes have sufficient toughness properties, but are only suitable for out-of-position welding to a limited extent (high-alloy). BÖHLER electrodes for under water welding are a special type namely rutile acid (RA). They have a special sealing to protect against the water.
Basic-coated stick electrodes
The main advantages of basic electrodes are the outstanding toughness properties of the weld metal and its resistance to hot and cold cracks. Basic-coated electrodes have a coarse droplet material transfer, can be used to weld in all positions and have somewhat coarsely rippled seams. The slag can be relatively easily removed, but not as easily as with rutile-coated electrodes.
Stick electrode portfolio
Each type of steel needs a different stick electrode. It can be differentiated between the following steel types:
- Stick electrodes for unalloyed steels
- Stick electrodes for high-strength steels
- Stick electrodes for creep resistant steels
- Stick electrodes for stainless steels
- Stick electrodes for nickel and nickel alloys
Böhler Welding DRY SYSTEM is the efficient alternative for costly climate controlled storage and handling procedure, providing “oven dry” stick electrodes straight from the vacuum packaging. Böhler Welding DRY SYSTEM avoids the necessity of re-drying, and use of holding ovens and quivers in welding applications with a potential risk of hydrogen induced or hydrogen assisted cracking. Safe welding with low-hydrogen weld metal is assured up to nine hours after opening the vacuum pack.
Optimal quantity for high demanding industries
Stick electrodes ensure easy and flexible handling without gases and simple power sources. Böhler Welding DRY SYSTEM vacuum packages together with user friendly packaging sizes offer optimal packaging content in industries where stick electrodes are of high priority.
DRY SYSTEM user benefits
- Guarantee of low-hydrogen weld metal - an important prerequisite in the prevention of hydrogen cracks
- Avoidance of costly climate controlled storage and handling and re-drying. Simple distribution to welders
- Possibility to check whether electrodes are within 9 hours of safe exposure
- Content can be chosen to match fabricator or industry specific consumption
- Can be disposed with normal paper and metal waste
Using a strong foil made of multi-layered aluminium, the new Böhler Welding DRY SYSTEM offers maximum safety against loss of vacuum due to the undesired penetration of sharp objects during storage and use. Welders will see immediately if the electrodes are still oven dry. With the vacuum in place, electrodes are ready to use. The packs can be stocked in any dry place where the packaging cannot get damaged. DRY SYSTEM is environmentally-friendly. No plastic in the form of PE or PP boxes is used at all.
Böhler Welding DRY SYSTEM for best in class products
Böhler Welding Stainless Steel DRY SYSTEM Portfolio
Most welding consumables are classified in accordance with an EN ISO and AWS standard. There are a number of different EN ISO standards that apply for different areas:
- Stick electrodes for unalloyed steels and fine-grained steels (EN ISO 2560)
- Stick electrodes for high-strength steels (EN ISO 18275)
- Stick electrodes for creep-resistant steels (EN ISO 3580)
- Stick electrodes for stainless and heat-resistant steels (EN ISO 3581)
- Stick electrodes for nickel and nickel alloys (EN ISO 14172)
AWS stands for American Welding Society. In relation to the fields of application and the alloying type the following classification exists:
- AWS A5.1/A5.1M Specification for carbon steel electrodes for shielded metal arc welding
- AWS A5.5/A5.5M Specification for low-alloy steel electrodes for shielded metal arc welding
- AWS A5.4/A5.4M Specification for stainless steel electrodes for shielded metal arc welding
- AWS A5.11/A5.11M Specification for nickel and nickel-alloy welding electrodes for shielded metal arc welding
Unalloyed electrodes AWS A5.1
- E: Type of welding consumables. Here: Electrode
- 70: Code for the min. tensile strength in [ksi]. Here: 70 ksi (=480 MPa)
- 1: Code for the welding Position. Here: 1= All positions (2= flat and horizontal only)
- 8: Type of coating and current and polarity. Here: iron powder low hydrogen. Polarity AC or DCEP
- -1: This electrode meets low temperature impact requirements
- H4: Code for diffusible hydrogen. Here: < 4mg / 100g weld metal
- R: Code for reduced moisture Absorption
HIGH Alloyed electrodes AWS A5.4
- E: Code for type of welding consumables. Here: Electrode
- 308: Code for chemical composition
- L: Code for low Carbon
- -16: Usability Designation: -15 = DCEP only, basic type; -16 (-17) includes arc stabilizing elements (Rutile). AC possible.
Requirements: Good vertical-down welding properties
Answer: Cellulose electrode
Explanation: Due to its suitability for vertical-down welding (pos PG), this electrode type is used to weld circumferential seams on large diameter pipes (pipelines). Relatively thick electrodes (4 mm) can be used for root welding.
Requirements: Good bead appearance. Easy-to-remove slag and easy to reignite.
Answer: Rutile electrode
Explanation: The special properties of the electrodes are their good bead appearance, easy-to-remove slag and they are easy to reignite.
Requirements: Very high toughness properties
Answer: Basic electrode
Explanation: This electrode is suitable for all positions, and as a special type also for vertical-down positions. Basic electrode has the best toughness properties, even at low temperatures, and the highest resistance to cracking. It is used for difficult base materials and thick-walled parts. The low hydrogen content makes it possible to weld high-strength, fine-grained steels.
Requirements: Good vertical-up properties
Answer: Rutile basic electrode
Explanation: This electrode is good for welding on the root pass and in the vertical-up position in pipeline and container construction. It is also easy to handle in out-of-position welding.
Requirements: Good underwater properties
Answer: Rutile acid electrode
Explanation: For underwater welding, a stick electrode is needed with good seam quality to weld in wet environments in order to economically produce quality underwater welding connections.