Dimensions hot rolled | Surface finish |
Width max. 2,000 mm | As rolled |
Length max. 7,000 mm | Shot blasted |
Thickness 2.0 mm up to 90.0 mm | Pickled |
Weight max 2,000 kg | Ground |
Milled | |
Dimensions cold rolled | |
Width max. 1,250 mm | Minimum order quantities |
Length max. 5,000 mm | Standard alloys (output of one slab) |
Thickness 1,0 mm up to 6.0 mm | Steel 800 – 3,000 kg |
Ni-base-alloys 800 – 2,200 kg | |
Edge finish | Titanium 600 – 1,100 kg |
Shear cut | |
Laser cut | Special alloys (output of one melt) |
Cold sawn | VID 6-8 |
Plasma cut | EAF-VOD 25 – 35 to |
Water jet cut | VIM 4 alt. 10 to
(Ni-base-alloys) |
Product | Dimensions and Weight | (Rough Machined) | Limitations |
Round Bars | D = 127 to 1.420 mm L <= 14.000 mm (lathed) D = 142 to 1.480 mm L <= 18.000 mm (raw forging) Weight <= 24.000 kg |
D <= 240 => +2/-0
D>= 240 => +3/-0 L => +10/-0 |
Bars with diameters larger than 650 mm and length longer than 7,400 mm only be supplied without heat treatment (upon consultation) or normalized or stress relieved (length up to 12,000 mm). Bars with diameter up to 215 mm can only be supplied with no length up to 14,000mm. |
Square Bars | T = 130 to 1.250 mm L <= 12.000 mm (machined) Weight <= 22.500 kg |
T => +3/-0
L => +10/-0 |
Bars with thickness larger than 650 mm and length longer than 7,400mm can only be supplied without heat treatment (upon consultation) or normalized or stress relieved. |
Flat Bars | T = 130 to 1.250 mm W = 130 to 2.300 mm L <= 12.000 mm (machined) Weight <= 22.500 kg |
T => +3/-0
W => +3/-0 L => +10/-0 |
Bars with thickness or width larger than 650 mm and lenght longer than 7,400 mm can only be supplied without heat treatment (upon consultation) or normalized or stress relieved. (*) Bars with width larger than 1,250 mm must have a maximum area equal to square bar area of 1,250 mm. |
Hollow Bars | D = 203 to 1.300 mm Di = 65 to 505 mm T >= 50 mm L <= 14.000 mm Weight <= 23.000 kg |
D <= 240 => +2/-0
D>= 240 => +3/-0 Di => +/-1,5 L => +10/-0 |
The dimension of holes depends on the available tools and dimension of the parts, but in general, it varies from 65 to 505mm. Smaller holes can be supplied upon consultation, by subcontracting other machine shops. Bars with diameter larger than 650mm and length longer than 7,400mm can only be supplied without heat treatment (upon consultation) or normalized or stress relieved. |
Disks (H<D) | D = 450 to 2.340 mm H = 130 to 1.420 mm Weight <= 22.500 kg |
D => +3/-0
H => +10/-0 |
Parts with diameter from 900 to 2,340mm can only be supplied with a height shorter than 175mm and taller than 1,420mm, upon consultation. Parts with diameter larger than 1,900mm can only be supplied normalized. |
Rings (H<D) | D = 450 to 3.000 mm Di <= 2.000 mm H = 130 a 1.420 mm Weight <= 20.000 kg |
D => +3/-0
Di => +0/-3 H => +10/-0 |
Sum of inner diamter and thickness must be ~2,200mm. Parts with external diameter larger than 1,900mm can only be supplied without heat treatment (upon consultation) or normalized. Parts with external diameter larger than 2,000mm can only be supplied with inner diameter larger than 200mm. |
Sleeves (L>D) | D = 500 to 2.600 mm Di = 380 to 2.000 mm L <= 4.300 mm Weight <= 20.000 kg |
D => +3/-0
Di => +0/-3 L => +10/-0 |
Sum of inner diameter plus thickness must be ~2,200 mm. Parts with inner diameter larger than 650mm can only be supplied with length up to 2,500mm. Parts with length larger than 2,000mm can only be supplied with inner diameter in the as forged condition (upon consultation). |
Solid Blanks | D = 127 to 1.600 mm L <= 12.000 mm Weight <= 22.000 kg |
D => +3/-0
L => +10/-0 |
Parts with diameter larger than 650mm and length larger than 7,400mm can only be supplied without heat treatment (upon consultation) or normalized. |
Flanged Shafts | D = 400 to 1.600 mm Di >= 250 mm L <= 12.000 mm Weight <= 20.000 kg |
D => +3/-0
L => +10/-0 |
Parts with diameter larger than 650mm and length larger than 7,400mm can only be supplied without heat treatment (upon consultation) or normalized. |
Hollow Blanks | D = 127 to 1.600 mm Di = 65 to 505 mm L <= 14.000 mm Weight <= 20.000 kg |
D => +3/-0
Di => +/-1,5 H => +10/-0 |
Sum of inner diameter and thickness must be ~2,200mm. Parts with external diameter larger than 1,900mm can only be supplied without heat treatment (upon consultation) and normalized. Parts with external diameter larger than 2,000mm can only be supplied with height about 200mm. |
Product | ASTM | UNSA | INSI | Others |
VM40 | ASMT A332 (4340) | G43400 | 4340 | SAE 4340/
AMS 6414 |
F11 | ASTM A182
GRADE F11 (MOD.) |
K11597
K11572 |
ASME SA387
Gr. 11 |
|
F22 | ASTM A182
GRADE F22 (MOD.) |
K21590 | ASME SA387
Gr. 22 |
|
VB30 | ASTM A322 (8630)
ASTM A29 (8630)
|
G86300 | 8630 | SAE 8630 |
VL30 | ASTM A322 (4130) | G41300 | 4130 | SAE 4130 |
VL40 | ASTM A322 (4140)
ASTM A646 (4140) |
G41400 | 4140 | AMS 6349 |
VM30 | ASTM A322 (4330)
ASTM A29 |
K23080 | 4330 | EN 30B / AMS 6411
|
Product | ASTM | UNSD | IN / Wnr. |
VRC625 | ASTM B446 | UNS N06625 | DIN 17744
Wnr. 2.4856 |
VATX750 | ASTM B637 | N07750 | Wnr. 2.4669 |
VATX286A | ASTM A660 | Wnr. 1.4980 | |
VAT718A | ASTM B637 | N07718 | Wnr. 2.4668 |
VAT800HT | ASTM B408 | N08811 | Wnr. 1.4876
1.4959 |
VRC400 | ASTM B164
B564 |
N04400W | Wnr. 2.4360 |
Product | ASTM | DIN / Wnr. | Others |
V630 | ASTM A564
(630) 17-4 PH |
1.4542 | AMS 5643
AMS 5622 |
N4534 | ASTM A564
(XM-13) PH 13-8 Mo |
1.4534 | AMS 5629 |
Product | ASTM | UNS | DIN / Wnr. |
N4460 | ASTM A182
GR F50 / ASTM A276 |
UNS S32900 | DIN X3CrNiMoNbN
Wnr. 1.4460 |
N4462 | ASTM A 182
Gr. F51 / ASTM A276 |
UNS S31803 | DIN 2CrNiMoN
Wnr. 1.4462 |
VF53 | ASTM A182
Gr F53 / ASTM A276 |
UNS S32750 | DIN X2CrNiMoN25-7-4
Wnr. 1.4410 |
N4501 | ASTM A182
Gr F55 / ASTM A276 |
UNS S32760 | DIN 2CrNiMoCuWN25-7-4
Wnr. 1.4501 |
N4507 | ASTM A182
Gr F61 / ASTM A276 |
UNS S32550 | DIN X2CrNiMoCuN25-6-3
Wnr. 1.4507 |
Product | ASTM | NS | AISI | DIN / Wnr. | Others |
N4313 | ASMT A182
Gr F6NM |
S41500 | DIN X3CrNiMo13-4
Wnr. 1.4313 |
VC140 | ASTM A276 (410)
ASTM A182 / Gr F6a |
S41o00 | 410 | DIN X12Cr13
Wnr. 1.4006 |
NBR 5601
SAE 51410
|
VC150 | ASMT A276 (420) | S42000 | 420 | DIN X20Cr13
Wnr. 1.4021 |
NBR 5601
Type 420 |
V416 | ASMT A582 (416) | S41600 | 416 | DIN X12CrS13
Wnr. 1.4005 |
NBR 5601
AMS 5610L Type II |
Product | ASTMU | NS | AMSM | IL |
VART250
(MARAGING 250) |
ASTM A579
GR 72 |
UNS K92890 | AMS 6512 | MIL-S-46850D |
VART300
(MARAGING 300) |
ASTM A579
GR 73 |
UNS K93120 | AMS 6514 | MIL-S-46850D |
VXM19 | ASTM A276/
ASTM A479 GR XM19 |
S20910 | AMS 6514 | MIL-S-46850D |
Product | ASTM | UNS | AISI | DIN / Wnr. |
V304UF | ASMT A182 / Gr F304
ASTM A276 |
S304003 | 04 | DIN X5CrNi18-10
Wnr. 1.4302 |
V304XLUF | ASMT A182 / Gr F304L
ASTM A276 |
S30403 | 304L | DIN X2CrNi18-9
Wnr. 1.4307 |
V316UF | ASMT A182 / Gr F316
ASTM A276 |
S316003 | 16 | DIN X5CrNiMo17-12-2
Wnr. 1.4401 |
V316XLUF | ASMT A182 / Gr F316L
ASTM A276 |
S31600 | 316L | DIN X2CrNiMo17-12-2
Wnr. 1.4404 |
V317L | ASMT A182 / Gr F317L
ASTM A276 |
S31703 | 317L | DIN X3CrNiMo18-12-3
Wnr. 1.4449 |
V321 | ASMT A182 / Gr F321
ASTM A276 |
S321003 | 21 | DIN X5CrNiTi18-10
Wnr. 1.4541 |
V347SI | ASTM A182 / Gr F347
ASTM A276 |
S347003 | 47 | DIN X5CrNiTi18-10
Wnr. 1.4543 |
Closed Die Forgings from 2-200 kg
AISI | ASTM | DIN/EN | C | Si | Mn | Cr | Mo | Ni | V |
4130 (MOD) | ASTM A29 | 1.7720 / 34 CrMo4 | 0.28
0.33 |
0.15
0.35 |
0.40
0.60 (0.80) |
0.80
1.10 (1.20) |
0.15
0.25 (0.35) |
– | – |
4140 (MOD) | ASTM A29 | 1.7725 / 42 CrMo4 | 0.38
0.43 (0.45) |
0.15
0.35 |
0.40
0.60 (0.80) |
0.80
1.10 (1.20) |
0.15
0.25 (0.35) |
– | – |
4145 (MOD) | ASTM A29 | 1.7228 / 50 CrMo4 | 0.43 (0.42)
0.48 (0.49) |
0.15
0.35 (0.50) |
0.75
1.00 (1.30) |
0.80
1.10 (1.35) |
0.15
0.25 (0.45) |
– | – |
4340 | ASTM A29 | 1.6565 / 40 NiCrMo 6 | 0.38
0.43 |
0.15
0.35 |
0.60
0.80 |
0.70
0.90 |
0.20
0.30 |
1.65
2.00 |
– |
8620 | ASTM A29 | 1.6523 / 20 NiCrMo 2-2 | 0.18
0.23 |
0.15
0.35 |
0.70
0.90 |
0.40
0.60 |
0.15
0.25 |
0.40
0.70 |
– |
AISI | ASTM | DIN/EN | C | Si | Mn | Cr | Mo | Ni | V |
8630 (MOD) | ASTM A29 | 1.6545 / 30NiCrMo 2-2 | 0.28 (0.25)
0.33 |
0.15
0.35 (0.45) |
0.70
0.90 (1.10) |
0.40
0.60 (1.50) |
0.15
0.25 (0.65) |
0.40
0.70 (1.00) |
– |
F22 (V) | ASTM A182 | 1.7380 / 10 CrMo 9-10 | 0.05 (0.11)
0.15 |
max.
0.50 (0.10) |
0.30
0.60 |
2.00
2.50 |
0.87 (0.90)
1.13 (1.10) |
max.
0.50 (0.25) |
(0.25)
(0.35) |
4333 (MOD) | ASTM A646 | 1.6932 / 28 NiCrMoV 8-5 | 0.28
0.33 |
0.20
0.35 |
0.75
1.00 |
0.70
0.95 |
0.35
0.50 |
1.65
2.00 |
0.05
0.10 |
4330V MOD, EFFICIENT | ASTM A723 | 1.6943 / 32 NiCrMoV 12-3 | 0.28
0.34 |
max.
0.35 |
0.60
0.80 |
0.80
1.10 |
0.45
0.60 |
1.65
3.00 |
0.05
0.15 |
4330V MOD, PREMIUM | ASTM A723 | 1.6959 / 35 NiCrMoV 12-5 | 0.30
0.35 |
max.
0.35 |
0.50
0.70 |
1.30
1.50 |
0.45
0.60 |
3.00
3.50 |
0.10
0.20 |
AISI | ASTM | DIN/EN | C | Si | Mn | Cr | Mo | Ni | V |
F6NM | ASTM A182 | 1.4313 / X3 CrniMo 13-4 | max. 0.05 | max. 0.60 | 0.50
1.00 |
11.50
14.00 |
0.50
1.00 |
3.50
5.50 |
– |
410 | ASTM A473 | 1.4006 / X12 Cr 13 | max.
0.15 |
max.
1.00 |
max.
1.00 |
11.50
13.50 |
– | max.
0.75 |
– |
420 | ASTM A473 | 1.4021 / X20 Cr 13 | min. 0.15 | max.
1.00 |
max.
1.00 |
12.00
14.00 |
– | – | – |
Material Number | Alloy | UNS |
2.4068 | Nickel 201 | N02201 |
2.4360 | Alloy 400 | N04400 |
2.4375 | Alloy K500 | N05500 |
2.4602 | Alloy C22 | N06022 |
2.4605 | Alloy 59 | N06059 |
2.4610 | Alloy C-4 | N06455 |
2.4633 | Alloy 602 CA | N06025 |
2.4634 | Alloy 105 | N132021 |
2.4650 | Alloy C-263 | N07263 |
2.4660 | Alloy 20 | N08020 |
2.4663 | Alloy 617 | N06617 |
2.4665 | Alloy X | N06002 |
2.4668 | Alloy 718 | N07718 |
2.4669 | Alloy X-750 | N07750 |
2.4816 | Alloy 600 | N06600 |
2.4819 | Alloy C-276 | N10276 |
2.4851 | Alloy 601 | N06601 |
2.4856 | Alloy 625 | N06625 |
2.4858 | Alloy 825 | N08825 |
2.4878 | Alloy 101 | |
2.4951 / 2.4630 | Alloy 75 | N06075 |
2.4952 / 2.4631 | Alloy 80A | N07080 |
2.4964 | Alloy L-605 | R30605 |
2.4969 / 2.4632 | Alloy 90 | N07090 |
2.4973 | Alloy R-41 | N07041 |
2.4975 / 2.4662 | Alloy 901 | N09901 |
Alloy 725 | N07225 | |
2.4852 | Alloy 925 | N09925 |
Material Number | Alloy | UNS |
3.7025 / 3.7024 | Ti Grade 1 | R50250 |
3.7025 / 3.7024 | Ti Grade 2 | R50400 |
3.7055 | Ti Grade 3 | R50550 |
3.7065 / 3.7064 | Ti Grade 4 | R50700 |
3.7105 | Ti Grade 12 | R53400 |
3.7145 / 3.7144 | Ti-6-2-4-2 | R54620 |
3.7165 / 3.7164 | Ti Grade 5 | R56400 |
3.7175 / 3.7174 | Ti-6-6-2 | R56620 |
3.7185 / 3.7184 | Ti-4-4-2 | |
3.7195 / 3.7194 | Ti Grade 9 | R56320 |
3.7235 | Ti Grade 7 | R52400 |
Material Number | Alloy | UNS |
1.3912 | Alloy 36 | K93600 |
1.3917 | Alloy 42 | K94100 |
1.3964 | Alloys 50 | S20910 |
1.3974 | ||
1.3981 | Alloy K | K94610 |
1.4313 | F6NM | S41500 |
1.4429 ESU | 316LN ESR | S31653 |
1.4529 | Alloy 926 | N08904 |
1.4534 | PH 13-8Mo | S17400 |
1.4539 | Alloy 904L | N08904 |
1.4542 / 1.4548 | 17-4 PH | S17400 |
1.4545 | 15-5 PH | S15500 |
1.4550 / 1.4546 | Alloy 347 | S34700 |
1.4562 | Alloy 31 | N08031 |
1.4568 | 17-7 PH | S17700 |
1.4876 | Alloy 800 | N08810 |
1.4939 | Jethete | S64152 |
1.4958 | Alloy 800H | N08810 |
1.4959 | Alloy 800HT | N08811 |
1.4980 / 1.4944 | A286 | S66286 |
1.4986 | ||
1.6358 / 1.6354 | Maraging 300 | K93120 |
Material Number | Alloy | UNS |
Zr 702 | R60702 | |
Zr 705 | R60705 | |
Molybdenum | ||
Tantulum | ||
Tungsten |
Product | Market Grade | UNS | Bar | Billet | Wire | Sheet | Plate | Forgings | AM Powder |
L359 | Alloy 59 | N06059 |
x |
||||||
Monel 400 | Alloy 400 | N04400 | x |
|
|||||
Monel K500 | Alloy K500 | N05500 | x |
|
|||||
L331/L625 | Alloy 625 | N06625 | x |
x |
x | x | x | x | x |
L718 | Alloy 718 AMS | N07718 | x |
x |
x | x | x | x | x |
L718API | Alloy 718 API | N07718 | x |
x |
x | x | x | x | |
L725 | Alloy 725 | N07725 | x |
x |
x | x | |||
L314 | Alloy 825 | N08825 | x |
x |
x | x | x | x | |
L090 | Alloy 90 | N07090 | x |
x |
x | ||||
L901 | Alloy 901 | N09901 | x |
x |
x | x | |||
L925 | Alloy 925 | N09925 | x |
x |
x | x | |||
L022 | Alloy C22 | N06022 | x |
x |
x | ||||
L276 | Alloy C276 | N10276 | x |
x |
x | ||||
L004 | Alloy C4 | N06455 | x |
x |
x | ||||
L003 | Alloy G3 | N06985 |
x |
||||||
L750 | Alloy X750 | N07750 |
x |
||||||
L303 | Waspaloy | N07001 | x |
x |
x |
Product | Market Grade | UNS | Bar | Billet | Wire | Sheet | Plate | Forgings | AM Powder |
N400 | F6NM | S41500 | x |
x |
x | x | |||
N404 | DIN 1.4418 | SS2387 |
x |
||||||
N700 | 17-4 PH | S17400 | x |
x |
x | x | |||
N701 | 15-5 PH | S15500 | x |
x |
x | ||||
13CR (420M) | S42000 | x |
|
||||||
Super 13CR | S41427 | x |
|
Product | Market Grade | UNS | Bar | Billet | Wire | Sheet | Plate | Forgings | AM Powder |
A903 | F51 Duplex | S31803 | x |
x |
x | x | x | x | |
A913 | F53 Dupley | S32750 |
|
x | x | x | |||
A911SA | F55 Duplex | S32760 | x |
x |
x | x | x | x |
Product | Market Grade | UNS | Bar | Billet | Wire | Sheet | Plate | Forgings | AM Powder |
A200 | 316/316 L | S31600/S31603 | x |
|
|||||
A965SA | F44 6Mo | S31254 | x |
x |
x | x | |||
T200 | A286 | S66286 | x |
x |
x | ||||
P511 | Nitronic 50 | S20910 | x |
x |
x | ||||
P513 | Nitronic 60 | S21800 | x |
x |
x |
Product | Market Grade | UNS | Bar | Billet | Wire | Sheet | Plate | Forgings | AM Powder |
F22 | K21590 | x |
x |
x | |||||
4130 | G41300 | x |
x |
x | |||||
4140 | G41300 | x |
x |
x | |||||
4145 | G41300 | x |
x |
x | |||||
4330V Mod. | K23080 | x |
x |
x | |||||
8630 Mod. | G86300 | x |
x |
x | |||||
9CR/1MO | K90941 | x |
x |
x | |||||
L314 | 4330V Mod. | K23080 | x |
x |
x | ||||
L090 | Alloy 90 | N07090 | x |
x |
x | ||||
L925 | Alloy 925 | N09925 | x |
x |
x | x | |||
L022 | Alloy C22 | N06022 | x |
x |
x | ||||
L276 | Alloy C276 | N10276 | x |
x |
x | ||||
L004 | Alloy C4 | N06455 | x |
x |
x | ||||
L003 | Alloy G3 | N06985 |
x |
We offer our materials in a wide range of shapes in various dimensions.
We have our own sales and service network at around 140 locations in all industrialized regions of the world. The importance of this aspect is also demonstrated by the fact that about 40% of all division employees work in sales and service.
Additive manufacturing (AM), also known as “3D printing,” enables production with shorter lead times, at lower weight, and for shapes that were not previously feasible.
With the acquisition of Eifeler, we are one of the leading suppliers of PVD (and CVD) coatings. Discover our wide range of coating systems here.
We offer a wide range of Heat Treatments through our worldwide distribution network. This allows us to optimize our products for your specific applications.
We aim to provide the best possible availability and short delivery times. This is achieved through machining services offered through our worldwide distribution network.
With our range of warehousing technology solutions, we meet the highest customer requirements, cover the entire value chain and guarantee the best quality standards.