Skip to main content
Tillbaka till översikten

voestalpine successfully finishes repairs to the large blast furnace at the site in Linz

2018-09-27 | 

Completing the general renovation of Blast Furnace A has brought the voestalpine Steel Division a further step towards increasing energy and resource efficiency at its steel production site in Linz. After a 111-day period for repairs, the furnace, in which two-thirds of the entire annual pig iron volume of five million tons is produced, today successfully restarted operations. At a total cost of around EUR 180 million, the so-called relining project involved completely replacing the extremely wear-resistant interior lining of the blast furnace, as well as modernizing all other facilities used in operating the blast furnace. At around the same time, interim repairs were carried out on one of the two blast furnaces in Leoben-Donawitz.

Wolfgang Eder

The comprehensive upgrades to Blast Furnace A are important in safeguarding the future of the site in Linz, and that of its about 11,000 employees, for the coming decade. At the same time, the high technical standard of this blast furnace is also the basis for supplying our processing sites with high-quality steel grades.

Wolfgang Eder, Chairman of the Management Board of voestalpine AG

The relining of the large blast furnace, originally built in 1977 and most recently extensively upgraded in 2004, was undertaken during the period from June to September 2018 and, in addition to replacing the refractory bricks, included the modernization of all peripheral plant and equipment such as the Cowper stove, gas supply, and dedusting systems. The focus also lay in installing new digital measuring and control instruments. By involving the customers at an early stage and consistently building up a stock of the relevant pre-material supplies, it was possible to deliver as usual during the repair phase.

Digitalization for greater resource efficiency

Herbert Eibensteiner

While modernizing Blast Furnace A we upgraded all the process steps to the state-of-the-art in order to achieve even better results in terms of resource conservation and material consumption. We are doing this by using completely new digital capabilities as well.

Herbert Eibensteiner, Member of the Management Board of voestalpine AG and Head of the Steel Division

The applied technologies include 3D radar to determine the optimum distribution of raw materials and automated temperature measurements within the blast furnace. Around 160 employees in the core voestalpine team worked to prepare and realize this major project, while at the same time a total of 1,000 people were employed at the site for over a year. Special simulation software which mapped all the plant and equipment as well as process scenarios was used to plan the relining. In future this tool will also be used during ongoing operations at the blast furnace.

Interim repairs to the blast furnace in Leoben-Donawitz

Parallel to the major project in Linz, one of the two blast furnaces belonging to the Metal Engineering Division in Leoben-Donawitz also underwent interim repairs. After 64 workdays, the furnace, which is responsible for around half of the 1.5 million tons of annual pig iron production at the Styrian site, returned to normal operations this week. The costs for the repairs, which are routinely undertaken on each of the two furnaces at the site once every four years, amounted this time to the comparatively low sum of EUR 14 million.

Steel Division

As the largest Group division in terms of revenue, the voestalpine Steel Division has attained quality leadership in highest quality steel strip, as well as a global leading position worldwide in heavy plates for the most sophisticated applications and complex casings for large turbines. The division is the first point of contact for major automotive manufacturers and suppliers when it comes to strategic product developments, and offers support to its customers around the world. It is also one of the most important partners to the European white goods and mechanical engineering industries. The division produces heavy plates for the energy sector which are used in the oil & gas industries and for renewable energies, for applications in extreme conditions, for example, for deep-sea pipelines or in the permafrost regions of the world. The division operates the world’s most advanced direct reduction plant in Corpus Christi, Texas, USA, producing highest quality pre-materials for steel production, for its own and external requirements. In the business year 2017/18, the division generated revenue of EUR 4.8 billion and reported an operating result (EBITDA) of EUR 908 million. It has around 11,000 employees worldwide.

voestalpine-koncernen

Inom sina affärsområden är voestalpine en världsledande teknik- och industrivarukoncern med kombinerad material- och bearbetningskompetens. Den globala företagsgruppen har ca 500 koncernbolag och koncernanläggningar i mer än 50 länder på alla fem kontinenterna. Den är noterad på Wien-börsen sedan 1995. Med sina högkvalitativa produkt- och systemlösningar av stål och andra metaller räknas den som ledande partner för den europeiska bil- och hushållsapparatindustrin samt luftfarts-, olje- och gasindustrin världen över. voestalpine är dessutom världsledande på växelteknik och specialräls samt verktygsstål och specialprofiler. Under verksamhetsåret 2017/18 uppnådde koncernen ett resultat före skatter och avskrivningar (EBITDA) på knappt 2 miljarder euro med en omsättning på närmare 13 miljarder euro och sysselsatte ca 51 600 medarbetare i hela världen.