Open preview picture of file
IE 2010 End position detector
IE 2010 detector halves mounted on a sleeper
The IE 2010 is an encapsulated end position detector for installation in the track on a sleeper.
The field of application covers a wide range of uses. The IE 2010 can be used for position detection of switch tongues involving the monitoring of the closed tongue positions and the open tongue positions. In addition a number of parameters can be chosen to be reported including the turnout trailing process and gauge narrowing or extensions.
The developing process was based on our traditional know-how in the fields of switch and monitoring technology. The result of this development was the innovative IE 2010 system which has the ability to perform monitoring on a high technical level for different application needs. The system is designed for installation on a sleeper between the rails which leaves space for mechanical tamping between the sleepers. The design of a detector set is divided into two and installed on a sleeper that makes the accessibility possible.
All components are well-chosen and the functional encapsulated design ensures maximum availability as well as longer intervals between inspections and maintenance. Due to the design the system has the ability to counteract for vibrations and lubrication is superfluous. This contributes to optimised Life cycle costs (LCC) and therefore towards achieving the highest efficiency of the system.
All electrical and mechanical modules are pre-assembled ensuring rapid installation, the result of this integrated transformation is a smarter turnout system.
Precise adjustment can be done easily by hand in the installed and ready stage.
The end position detector IE 2010 can effectively provide high-precision answers to today’s rail administrations. The system follows the highest quality standards as well as safety standards (CENELEC tested) and its adaptability makes it applicable for standard turnouts up to high speed turnouts.
Advantages
Austrian federal railways; EW60-500-1:12 with IE 2010 under winter conditions
- No containment or impairment by dust or weather
conditions – encapsulated design - No containment or impairment by dust or weather
conditions – low wear - Easy to install due to completely pre-assembled
modules - Easy to adjust, no machining at site
- Space saving design
- No influence on operation by longitudinal relative
displacements of the switches caused by
temperature changes - No unbalanced load of the vibrating
superstructure caused by asymmetrically masses - No hindering of the tamping of the turnout
- Lifetime lubrication
- Suitable for retro-fitting
Technical characteristics:
IE 2010
| Gauge | from 1430mm |
| Number of monitoring levels | max. 10 |
| Switch openings | 50 - 145mm |
| Ambient temperature | -40 bis +80°C |
| Overall mass | approx. 50kg |
| Masse einer Prüferhälfte | approx. 10kg |
| Inspection | twice a year |
| Protection level | IP65 |
