alform®

voestalpine Stahl GmbH

Company

Segments

Automotive

Commercial vehicle industry

Machinery Industry

Roof, cladding, drainage

House industry

Household systems

Electrical industry

Tube and section industry

Cold-rolling industry

Steel Service Center

Steel trade

Offshore

Linepipe

Pressure vessel Industry

Steel construction Industry

Products

Steel strips

Hot-rolled steel strip

Cold-rolled steel strip

Electrical steel strip

Hot-dip galvanized steel strip

Electrogalvanized steel strip

Organic-coated steel strip

Metallurgical by-products

Slag products

Regeneration products

Lime products

Recycled materials

Coal by-products

Reducing agents

Brands

alform^®

altrix^®

colofer^®

corrender

durostat^®

isovac^®

ahss classic

ahss exposed

ahss high-ductility

hot rolled drive

martensitic steels

phs-scalefree^®

phs-ultraform^®

phs-directform^®

clearcover^®

prelube2

Imprint

Data Privacy Statement

Data Privacy Statement for Business Partners

Superior solutions

in high-strength and ultra-high-strength TM steel

Successful light-weight design requires the utilization of high-strength and ultra-high-strength steels. The innovative thermomechanically (TM) rolled steel grades alform® and alform® x-treme made by voestalpine lead to comprehensive weight reduction and provide exceptional advantages in processing. With their reduced material thicknesses and excellent weldability, our alform® steels provide cost savings from procurement to manipulation and processing.

Downloads

Product folder alform^® Premium steel for maximum efficiency and freedom of design PDF1.89 MBeng-GB

Data sheet alform^® M-series (hot-rolled steel strip) PDF915.44 KBeng-GB

Data sheet alform^® x-treme (hot-rolled steel strip) PDF909.93 KBeng-GB

Data sheet alform^® N-series (hot-rolled steel strip) PDF910.59 KBeng-GB

Data sheet alform^® 355-550 heavy plate PDF1.28 MBeng-GB

Data sheet alform^® x-treme 620-1100 heavy plate PDF1.32 MBeng-GB

Go to Website

Contact Person

Steel strips

Hot-rolled steel strip

Hot-rolled steel strip made by voestalpine is tailored to specific customer needs, and the product portfolio ranges from mild steels to meet the highest forming requirements to ultra-high-strength steels for the most demanding applications.

Hot-rolled steel strip

Hot-rolled steel strip made by voestalpine is characterized by high product quality and is a true all-rounder. It is as versatile as its many applications.

Portfolio

Hot-rolled steel strip to meet every customer requirement We supply strip widths up to 1,750 mm and thicknesses up to 20 mm. Our products are available in both pickled and unpickled condition, as slit or wide strip or as cut sheets. Consistently high quality and production within the narrowest tolerances are our claim. Hot-rolled steel strip made by voestalpine is available in a wide variety of grades. A variety of different alloys and rolling programs provide our customers with just the right steel for their specific applications.

Steel grades

Mild steels
Structural steels
Micro-alloyed steels
Case-hardening and heat-treatable steels
Martensitic steels
Complex-phase steels
Dual-phase steels
Ferritic-bainitic steels
Pole and rim steels
Steels for enameling
Steels for gas cylinders
Weather-resistant structural steels
Wear-resistant steels
High-strength and ultra-high-strength steels

Hot-rolled steel strip

voestalpine builds on partnerships and highest quality claims:

Development of customer-specific special grades based on individual requirements
High uniformity of mechanical and chemical properties
Narrowest tolerances guaranteed
Consistently high product quality based on precise rolling process in which temperature and forming are precisely matched
Material and processing expertise from a single source

Mild, unalloyed steels for cold forming

These steels are generally delivered in accordance with EN 10111. They are used in applications in which formability is more important than strength.

Structural steels

These steels are included in EN 10025. One of their fields of application is in machinery. The steels are characterized by minimum yield strength, a margin for tensile strength and minimum fracture elongation. They are used for light drawing stress, forming and bending.

alform® steels

alform® is a brand name in the voestalpine Steel Division and stands for hot-rolled fine-grained steel with best cold-forming properties and excellent weldability. alform® steels are available in various grades and strength classes. Whether thermomechanically or normalized rolled, as hot-rolled strip or heavy plate, in coils, slit strip or cut sheets, alform® is an indispensable material in mechanical engineering, automotive design and in the processing Industry.

Go to Website

durostat® steels

durostat® grades are wear-resistant steels that feature high hardness achieved through accelerated cooling directly from the rolling heat. They are characterized by a high degree of wear resistance and are especially suited to applications with high mechanical stress and high levels of abrasion.

Go to Website

Case-hardening and heat-treatable steels

Case-hardening and heat-treatable steels pursuant to DIN EN ISO 683-1 and EN 10084 as well as the voestalpine standard are implemented in direct-processing applications or are used for cold re-rolling. These steels generally undergo heat treatment in order to achieve the desired processing and component properties. They are used in applications that must strike an optimum balance between hardness and toughness.

Pole sheets

Pole sheets are thermomechanically rolled steels with guaranteed magnetic properties. Standard grades are pursuant to Euronorm EN 10265:1995 (corresponding to IEC 404-8-5). Ultra-high-strength special voestalpine grades are also supplied.

Hot-rolled enamelable steels

The narrowest tolerances, high material quality and highly specialized application expertise guarantee products that meet every requirement. Combinations of thick hot-rolled steels and thin cold-rolled steels, for example, are often used in industrial silo designs.

Hot-rolled strip next level

We go one step further with hot-rolled Q for the tube and section industry. Q for even more quality than you would expect as a customer. Q for even more hot-rolled strip grades, especially in the tube and section industry. Characteristics that can all be of great importance to customers or just individually. Hot-rolled Q for the tube and section industry is a package full of quality and efficiency improvements for production as well as for the end product.

More information

Kaltwalzer - Warmband mit einem Plus an Qualität

This could also be of interest to you:

Additional treatments

Additional treatments extend the range of applications as coordinated with pre-defined product requirements of each individual customer.

More information

Further processing

The proximity of the Steel & Service Center to the integrated steelmaking plant in the Steel Division provides unlimited access to unique product and material expertise and offers answers to the most difficult questions.

More information

Downloads

Range of supply hot-rolled steel PDF2.72 MBeng-GB

Back

Machinery Industry

The products of voestalpine feature excellent processing properties and provide optimized solutions for the machinery industry.

Machinery Industry

Made for the toughest tasks

Some industries are what steel was made for. The world of machinery is one of them. Steel made by voestalpine is perfectly within its comfort zone where highest mechanical loads and high-tech materials come together in highly sophisticated designs. Technical limits are constantly being pushed upward by further developments and innovations. Best processability and increasingly demanding mechanical properties lead to complex designs that leave nothing to be desired in terms of performance and efficiency. Steel can be used in the most diverse applications. Wear resistance, ultra-high strengths and high quality in any case.

Exploring new frontiers

What would our daily life be like without machines? Very different, that's for sure. The invention of effective new tools has always been a way of overcoming our limitations, and we are still creating innovative materials to push the limits even further. At voestalpine, we have proven this again and again with new and optimized products. Expertise from a wide range of highly innovative industries is bundled and engineered into materials and solutions for machinery, equipment and vehicles. The solutions are not only convincing in the lab, and they open new possibilities by increasing efficiency in design, production and use.

Consistently reduced weight

When high strength is no longer sufficient. With alform®, voestalpine offers an ultra-high-strength material to be used in combination with the alform® welding system to produce ultra-high-strength weld joints. A reduction in material thickness of more than 70% without compromising any performance results in a weight savings that goes hand in hand with substantially increased efficiency. Best cutability, best forming behavior and excellent toughness round off this power package.

Safely increased efficiency

The demands on the materials used in modern engineering are enormous. Perfect workability during the production process must not be a contradiction to maximum wear resistance and economy of use. With durostat®, voestalpine has succeeded in more than just meeting these requirements. One of the safest, most robust and efficient materials, durostat® boasts of highest durability in abrasive applications, enormous weight savings when compared to conventional structural steels, hardness second to none thanks to a specially developed direct hardening process, best cold formability thanks to fine-grained microstructure and high degree of purity, and best weldability thanks to the optimized carbon equivalent.

The skipster is the true winner in lightness and stability.

alform® makes many things lighter. The thermomechanically rolled (TM) material combines lightness with stability like no other, making it the perfect candidate for countless applications where high load capacity and low weight are essential. This applies to high-tech and complex machinery as well as comparatively simple containers.

TransANT railway freight cars made of high-strength alform® steel

Rail Cargo Group (RCG) was looking for a lightweight design that would meet the logistics requirements of the 21st century. The subsidiary of ÖBB has many years of valuable experience in freight transports and is part of a very strong international network. Coupled with the material expertise of voestalpine, a future-oriented design has now been developed with TransANT. This could be a revolution in railway freight car design.